DansBikeMI

Switched to microspline, so have no need for this anymore. Used for 4 months, still in excellent condition. Comes with boost end cap. $100 shipped within the US only.

Bought in the spring and have about 150-200 miles on it. Love the bike, but planning to build another project. This is a size Medium S Build with the GX Eagle (1x12) drivetrain and fox remote lockouts for the shock and fork. I've changed and added a few parts that I'll list below: - 780mm 31.8 NukeProof Horizon Carbon Handlebars - 50mm 31.8 NukeProof Horizon Stem (black) - Shimano XT M8000 brakes with adapters to keep cables neat - 150mm PNW Rainier Dropper Post w/ Wolftooth Lever - Maxxis High Roller II's 29x2.3 front and rear setup tubeless - Carbon Saddle - 160mm Ashima Rotors w/ titanium bolts - Ergon GE1 Factory Grips - Raceface Chester Pedals - RWC needle bearing kit for rear shock mount - Offset Bushing mounting hardware for front shock mount - Custom decals by NLDesigns - 3M Clear Tape in appropriate areas to protect the frame All stock parts included plus some extra stuff like an extra derailleur hanger, fox dps rebuild kit, extra bushings, and such (all extra stuff pictured) Specs/info on the bike can be found here: https://www.santacruzbicycles.com/en-US/bikes/blur Retail for stock bike: $4,499 Asking $3,750 + buyer pays shipping If you have any questions feel free to ask. Thanks for looking!

Brand new take offs from a Pivot Firebird. These have not been used at all yet. Was going to use these as backups, but they have just been sitting. Front Wheel Specs: OD: 35 mm ID: 30 mm Rotor: 180 mm Centerlock Shimano IceTech Rotor Spacing: 110 mm (Boost) Set up Tubeless w/ DT Swiss Tape and Valve Rear Wheel Specs: OD: 35 mm ID: 30 mm Rotor: 180mm Centerlock Shimano IceTech Rotor Spacing: 157mm (Super Boost) Set up Tubeless w/ DT Swiss Tape and Valve Freehub: SRAM XD If you have any other questions, feel free to let me know. $400.

Bought this last spring and put maybe 100 miles on it. Looking to get a different bike so this one has to go. Stock Race XT Build (1x11) for the most part. Replaced the stock 750mm bar for a carbon phoenix 760 bar and put on some chester pedals and ergon grips. Pictured with 27.5+ DT Swiss M1700's and will also include the stock 29" Sunringle Wheelset that came with the bike. With both wheelsets: $3,500. With just the 29" Sunringle wheelset: $3,000. If you have any questions, feel free to ask.