Dhers90 EnduroWorldSeries's article
May 10, 2019 at 4:09May 10, 2019
Video: How Do the Enduro Pros Set Up Their Pedals?
Where the dremels at??
Added 1 photo to Buysell
Feb 14, 2019 at 10:10Feb 14, 2019
Added 21 photos to Buysell
Feb 13, 2019 at 12:47Feb 13, 2019
Feb 13, 2019 at 12:34Feb 13, 2019
A large 2017 Yeti SB5.5 with a custom build is ready to ride with new parts! I built it up with the higher end Turq frame. It's been very well taken care of. I built up a Transition Sentinel to try something new so I'm selling this one. I will include the extra parts you can see in the picture (Yeti grease gun with extra tube of grease for the switch infinity, Backcountry Research Motherload Strap with tube, new derailleur hanger, original quick release rear axle, and some spare spokes).Pedals will not be included You can see some minor damage to the swing arm in one of the pictures. Its structurally sound though: I have 600+ miles on the bike since the damage occurred and there aren't any cracks that are propagating and tapping it doesn't indicate any delamination. This has been an amazing bike and I'm sad to see it go but it's time for something new for me. I have additional information on the build and the use on the parts below. DM me with any questions or to make an offer. Thanks for looking! • TURQ Frame - Front triangle was replaced due to delamination (current front triangle only has 243.3 miles) • Fox Factory Float X (Ran a different shock so this one that came on the bike only has 254.4 miles) • 2018 Fox Factory 36 with RC2 damper (Kashima coating) • Fox Factory Transfer dropper post (Kashima coating) • WolfTooth dropper remote • Industry 9 Enduro S wheelset • Michelin Wild ROCK'R2 • Michelin Wild RACE'R • Raceface Atlas Stem 35mm Length 35mm clamp diameter • Raceface Sixc Handlebars (cut to 760mm) • Oneup Components Chain Guide • Oneup Components Switch 32t Chainring • Sram Guide brakes (the pads still have plenty of life) • Ergon GE1 grips • Raceface Turbine Cranks • Shimano XT 11 speed drive train • Shimano XT 11-46t Casette • Real World Cycling Needle Roller Bearing replacement for rear shock bushing • Push Ultra Low Friction Seals • WTB Volt Saddle Total miles on bike: 2030.3 • Rear shock only has 252.4 miles on it • Handle Bar has 965.7 miles • Front triangle has 243.3 miles • Bottom Bracket has 699.7 miles • Brakes have 1665.8 miles • Bearings were replaced at 922.8 • New headset • New chain • New derailleur • Practically new tires