Earthmotherfu

LAST PRICEDROP,OR IM TEARING IT DOWN AND PARTING OUT!!!Hi,decided to sell my yeti,as I’m off to new projects and want the cash.spec as follows Invistaped from new,flawless med frame carbon. Ks lev dropper,works as should. Hope hoops on pro 4s Xo 11 speed drive train,carbon Hope cassette Tubeless set up Bos devilles 160s immaculate Thomson stem Control tech carbon bars 760mm Code calipers mated to guide rs levers( ordered a new clamp as I’ve misplaced it) Race face pedals Ergon Sam saddle Fox float x shock immaculate All bushes pivots like new as it’s been a bit of a show pony This bike is almost flawless and done less than 50 miles in two years,any viewingwelcome.cash on collection or bank transfer Thanks.

Built up,but never ridden anywhere but around the block.bought new from crc last year.lovely stealth paint,tange eccentric tubing in cromo.one little paint chip on top of head tube.142x12 rear axle.will take a tapered steerer and threaded B.B. Size is medium And it’s part of the new breed of hardtail,short chai stays,long toptube and low B.B. height. Any questions please ask £295 posted + pp fees Cheers A beautiful yet tough hardtail frame for all mountain and trail riding. NS built this frame using Tange Eccentric chromoly tubes that have been developed over the years for their dirt-jump bikes. The result is an incredibly strong yet light hardtail for aggressive trail riding. The Eccentric is designed primarily for 650B wheels but will work with 26” too. Rides best with a 140-150mm fork. The weight of the frame is approximately 2.4kg which is light by any standards, but thanks to their in depth knowledge of steel frame constructions NS know that it will also be strong enough to hold up to a lot of abuse. All the know-how that NS has managed to acquire over the years in building steel hardtails has been funnelled into the frame of this bike and it really is the very best money can buy. Features: Wheels: designed to fit 27.5”/650B but works also with 26” wheels. Recommended fork Travel: 130-150mm Material: Custom butted 4130 chromoly, Tange Eccentric tubes Head Tube: Semi integrated Zero Stack (ID 44mm) Headtube Length: S size: 105mm, M size: 115mm, L: 125mm Fork Compatibility: standard 1-1/8” or tapered 1.5 - 1-1/8” steerer tubes (forks with taper 1.5 – 1-1/8” steerer tubes can fit ZS44/44 headtube using special headsets with external lower cup (FSA Orbit ITA-A, ITA-B, Cane Creek XX44) Hub Spacing: 142x12mm, NS axle included or 135x10 bolt-on only (adaptors included) Brakes: IS-2000 disc brake mount, max rotor size: up to 185mm Bottom Bracket: threaded 73mm with ISCG-05 mounts Biggest Chainring: up to ~38t Front Derailleur: high clamp only, top pull, dia. 33mm/shim to fit 34.9 included. Seatpost: 30.9 Seatclamp: 34.9 Maximum Tyre Size Recommended: 2.35” Weight (w/o shock, w/o axle): ~2.49kg Additional Features: Stealth cable route in seat tube for dropper post Buy NS Bikes Frames from Chain Reaction Cycles, the World's Largest Online Bike Store.

Hi,bought this from Evans last year as new.built up for my partner but never used as you can clearly see by pics Can post for £15 parcelforce 48 Any questions just ask Cheers