Elysios
- Member since Jun 18, 2014
- Female
- Sacramento , California
- 22 Followers
- 199 Trailforks Points
You can't buy happiness, but you can buy a bike and that's pretty close
Recent
Selling
Oct 22, 2022 at 15:05
Oct 22, 2022Marin Nail Trail 7.7, 27.5”, Size 19”
$750 USD2015 Marin Nail Trail 7.7, size 19”. Nearly New, only ridden a handful of times. Only one crash and there’s a small scratch on the fork (shown in pic). It’s been stored in my garage for 6 months, so I’m sure it needs servicing. Beautiful bike, super lightweight, and needs a new home (and maybe a bath).
Frame: Series Two Alloy w/ SHOT Tech, 27.5; Front Fork: Rock Shox Reba RL Taper 27.5”, 100mm Travel; Crankset: Shimano SLX 2x10, 38/24T; Derailleur Rear: Shimano XT Shadow Plus, 10 Speed; Shift Lever: Shimano DEORE, 2x10-Speed; Derailleur Front: Shimano DEORE, 2x10-Speed; Cassette: Shimano DEORE, 11-36, 10-Speed; Bottom Bracket: Shimano HollowTech II Integrated; Chain: Shimano HG54; Hub Rear: Marin 4 Sealed Bearing, Centerlock; Hub Front: Marin 2 Sealed Bearings, Centerlock, 15MM Through Axle, 32-Hole; Spoke Nipples: 14 Gauge Black Stainless; Tires: Schwalbe Racing Ralph, 27.5x2.25; Brakes Front: Shimano M615 Hydraulic Disc, Centerlock, 7” Rotor; Brakes Rear: Shimano M615 Hydraulic Disc, Centerlock, 6” Rotor; Brake Levers: Shimano Hydraulic; Bar: Double Butted 6061 Alloy, OS-31.8mm, 10mm Rise, 720 Wide; Grips: Marin Micro-Knurl Double Locking; Stem: Marin OS Alloy Threadless, 31.8mm Bar Clamp; Headset: FSA Orbit 1.5ZSE, 1 1/8” Top, 1.5” Bottom; Seatpost: Marin Comp Alloy Micro Adjust, 2014 Alloy 15mm Offset, 400mm. Saddle: Selle Royal Seta; Pedals; Redline Alloy Mountain. Headtube Angle: 69*.
Hit me up for more pics, info, or if you’d like to see/ride it.
Elysios yeticycles's photo
Aug 7, 2018 at 8:59
Aug 7, 2018
Sweet!
Selling
Apr 8, 2018 at 12:06
Apr 8, 2018Kali-Maha-Graphix-Helmet Large FREE
$1 USDI have a Kali dirt lid I'd like to give to someone who needs a helmet. It's a size large, I believe. I do have a few extra pads that can go with it. I don't want anything for it - TOTALLY FREE! I've used it twice so it's basically brand new.
Selling
Apr 8, 2018 at 11:59
Apr 8, 2018Transition TR450 Medium
$1200 USDI'm selling my beloved bike to move to San Diego. It's a 2010 Transition TR450, medium frame, 26" wheels, 9 speed, white in color. I bought this bike used and have only ridden it a handful of times. I cleaned it up and it is in very good condition and has been loved and stored inside. It was just serviced in August 2017 by Shawn at Rad Bikes and hasn't been ridden since. Atlas bars, new Odi grips, new Saint BB, RaceFace chain ring, Spank pedals, Elixir brakes, Cane Creek headset, 2015 RockShock 200mm fork, DMR cranks, All Mountain Frame guards.
Serious inquires only please. I am willing to negotiate price.
Elysios AJBarlas's article
Oct 16, 2017 at 22:22
Oct 16, 2017
Rémy Métailler Denied US Entry, Won't Be At Rampage
Who are the other riders that can't attend due to the same sort of bullshit? Anyone know?
Selling
Jan 7, 2017 at 13:37
Jan 7, 2017Hope MTB Ceramic Bottom Bracket - Black
$90 USDHope MTB Ceramic Bottom Bracket - Brand New in Original Packaging (Never Used/Installed)
I bought this as a Christmas gift for my boyfriend's 2016 Evil Insurgent, but it turns out his cranks are 30mm so this is not compatible. It's a beautiful BB - brand new and in the original packaging from Hope. (I'd keep it if it was the right size for my bike!!). Anyhow, below is the official description of it:
"These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again increasing life and reliability.
Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's.
Hope MTB Bottom Bracket - Ceramic - 68/73mm Features:
The unit is suitable for 68 & 73mm shell width’s (FOR USE WITH 24MM CRANKS ONLY)
Weight 109g"
Message me if you have questions or need additional info! Thanks for looking!
25,454 views
310 Photos
476 views
4 Videos
Favorite news
Inertia ft. Brandon Semenuk - Video
6 Feb 2018
What's In a World Cup Mechanic's Toolbox?
29 Apr 2017
Video of the Month - December 2016
31 Dec 2016
Adios Remy Metailler - Video
27 Dec 2016