GoodHustle

I have a nice Stanton Slackline Next Gen (Gen 2) frame for sale. 16.5". This is a Reynolds 853 frame. Awesome condition aside from a fare amount of paint chips and a few scratches. No dents or dings. No rust. All threads and dropouts are good. Comes with both 142 and 148 boost dropouts as well a rockshox maxle and the Stanton QR axle. Also the Stanton seat post collar. This has been my favorite hardtail to date and I have owned quite a few over the years. The only reason I am selling it is because I have gone a bought a Gen 3 UK 853 Slackline. Shipping's on me if you use Venmo. Happy to answer any questions.

Hey I have a freshly serviced Helm MK1 27.5 damper for sale. Perfect condition and just serviced by Dirtlabs. They installed the MK2 in my fork, and bled this one and sent it back to me. Honestly, Im not sure I feel a big difference between the two dampers but maybe im just a rube.

These Avid Single Digit Ultimate brakes are in pretty good condition. Bearings feel smooth. Springs are in decent shape and not too bent or anything. Very new Kool Stop pads on there. One pair has black, the other has the salmon compound. I guess the noodles are long gone but they have some mounting screws with them. Happy to answer any questions.

Hey, I have a pretty nice OneUp dropper for sale. V1, 170mm X 30.9mm. Not a whole lot of use and still functions great. The first generation of the upper bushings on these posts had some binding issues. I have carefully sanded it down and it works great. Buuuut, if you pull hard up on the seat, it will pull the seat up a bit. It then returns back to were it was. New bushings are available from OneUp for a couple bucks. Personally, it never bothered me that much.

Hey, I have some brand new Profile no boss, spline drive crank arms for sale. 175mm. 19mm spindle. Never installed. I want to go with a different length is why i'm selling.

Hey, I have a really nice XT 11 speed rear derailleur for sale. Medium cage. Great condition. Couple light scratches and a little dirt. Functions perfect, just took it off for an upgrade. Limit screws, pullies, clutch, etc. all in good condition.

So this frame was custom made for my mom by Bill Davidson in Seattle back in 1988. She gave it to me around 2009 and I rode it for a few years but it's been sitting in storage for the last 10 years. Great bike, really smooth and supple frame and has been updated to accept modern hubs/wheels and shifters. She had the frame professionally spread so rear is 130mm and front (was always) is 100mm. Barrel adjusters are installed on the downtube to accommodate modern STI shifters. There is a Chris King headset (1") and the bearings feel great. Also comes with a Dura Ace seatpost and a matching frame pump. The only issues with the frame are, as you can imagine, a decent amount of scratches/paint chips and cable rub. The worst of it is pictured underneath the driveside chainstay. But no dents or dings. Threads on BB are great. Braze ons and dropouts are good aside from missing some paint and slight surface rust. Little bit of surface rust on exposed areas. The seatbinder bolt works fine but had bought it aftermarket and it had a notch that I filed off. I believe you can buy them without the notch. Free shipping to CONUSA

I have a nice One Up chain guide that I haven't used in a couple years. Time to see it go to a new home. Good condition. The three spacers are stacked in that pic.

I have a Hadley front XC hub conversion kit that will switch a 100mm front hub axle to quick release skewer. Perfect condition. Very easy to install.

I have a really nice Hadley front hub for sale. Its the XC type 100x15mm axle, 32 hole. Bearings are perfectly smooth and buttery. Just has some marks from the spokes.