Hedgepig76

Excellent seat bag in excellent condition. I haven't been able to use this much at all so it still looks almost new. Expandable from 6L to 14L. $80 CAD shipped to Canada and the US (if shipping to the US, I am heading down there in ~ 2 weeks, will ship then) VISCACHA™ FEATURES Roll down closure allows bag to expand or compress in volume EVA stiffened front and bottom plastic sheet provide rigidity and structure for load carrying Adjustable position saddle rail strap with urethane coated webbing provides fore-aft adjustment along saddle rails Internal compression strap for snug packing and internal separation Overkill aluminum loop seatpost wrap strap. Loops on top for attaching a bungee or Spocket Carbon seatpost friendly. SIZING Minimum of 9.5″ clearance from saddle rails to top of tire Minimum length of exposed seat post is 5″

A pair of Clement MXP tires in very good condition. 33x700c. These don't have many rides on them and I'm not doing CX anymore. $40 plus shipping PayPal only

Make me an offer, maybe I'll take it. 2018 Canfield Nimble 9 size Large 4130 chromoly steel  matte orange I love this bike. I don't want to sell this bike. Just got diagnosed with a medical condition that doesn't allow me to ride singletrack anymore, so now you can love this bike. The frame is in very good shape with a few marks near the bottom bracket and chainstays, nothing major. The black ED coating is still intact under those bits. The interior has been regularly treated with Fluid Film (best anti-corrosion treatment for steel frames in my opinion). All the components are in excellent shape. The chain doesn't have too many rides on it and I use hot wax lube so very little component wear. This bike has had a very easy life with me, never pushed it too hard. Just bled the brakes and has a fresh fork service from Country Cycle in Winkler, where it is on the shop floor if you want to see it. This is what is on it: 2018 Rock Shox Pike RC 150mm with upgraded DebonAir spring, Maxle QR thru axle, 42mm offset, and 7 3/4" of steerer (in great shape except for a tiny spot on the left stanchion about 2/3 of the way up that hasn't been any problem, I can't even feel it when rubbing my finger over it, and a scratch on the crown due to a bone-headed maneuver opening the air chamber to take out a token, see pics) no tokens in right now, will include one 2018 Race Face 29" ARC 27 offset boost wheelset with DT Swiss 350 hubs (18t ratchet), xd driver, and SRAM GX XD-1150 10-42t cassette (a scratch on the rear rim as seen in pics) Maxxis Rekon front, Ikon rear, both 2.6 EXO, lots of tread left Shimano XT M8000-B1 crank with 32t chainring Shimano XT M8000 11 speed rear mech Shimano SLX M7100 levers and calipers with SM-RT66 6 bolt rotors, 160mm front 140mm rear PNW Rainier gen 3 125mm dropper post with PNW Loam lever, both installed this summer Ergon SMC4-M saddle Salsa Pro-Moto 2 bar 710mm The headset is a rebranded Cane Creek A 55mm stem (an Evo that I was using to test length, never upgraded because it worked fine) I also have a 40mm Hussefelt I can put on instead I took off the ESI Grips in the pictures as they were a bit worn and put on some lock-ons I had laying around The XT pedals in the pictures are NOT included. Headset – 44mm upper and lower cups Chainline – 52mm/3mm chainring offset recommended for SRAM cranks Bottom bracket – 73mm, threaded (BSA) Front derailleur – Shimano direct mount – top pull/single bolt, or SRAM HO series Seatpost – 30.9mm, stealth dropper compatible Seatpost clamp – 35.0mm Rear dropout spacing – 148x12mm (Boost) 650b+ compatibility – Up to 35i rim/2.8 tire Brake mount – IS, (international standard) Effective top tube length 625mm Reach 450mm Stack 670mm (a bit more with the 150mm fork) HTA angle 66 deg with 150mm fork Seat tube length 457mm Wheel base 1189mm Chainstay length 412.75mm - 429.3mm BB drop 49mm BB height 323mm