Block user


Added 2 photos to Buysell
May 31, 2020 at 15:40
4 hours
Added 3 photos to Buysell
May 7, 2020 at 20:15
May 7, 2020
Added 8 photos to Buysell
Apr 20, 2020 at 21:33
Apr 20, 2020
Apr 20, 2020 at 21:31
Apr 20, 2020

Marzocchi, Fox Fork Parts (32, 34, 36)

$20 USD
Many years, many projects finished and otherwise. I'm not a shop, I just buy and upgrade too often. Cleaning house and would like to see these go to good use. If I didn't put a detail in the ad then I probably don't recall. Please see measurements and check the internet to find out if this will fit your needs. Everything in good working condition unless noted otherwise. Shipping to the lower 48 is possible. Assume that it will run $20, and if the actual cost to ship runs less than $16 I'll refund the difference. (If you know based on sight that any of the information I have here is wrong let me know and I'll update the ad). Fox 32 Parts: Item 1 [$10] - Old TALAS adjuster. Doesn't work. Good for parts. Item 2 [$30] - Another old TALAS adjuster, this time in good shape. ~2001 Item 3 [$40] - Open bath damper in good shape. ~2001 Item 4 [$70] - CTD cartridge from a 120mm Fox 32 29er. Item 5 [$50] - Fox 32 air spring from a 120mm Fox 32 29er. Item 20 [SOLD] - Fox 32 lowers. Bushings and dust seals in good shape. 27.5 (650B) w/ 15x100 thru axle included Item 21 [$60] - Upper stanchions (CSU), grey paint, tapered steerer measuring 6.75". Has a slightly smaller air piston bore compared to the other upper, so not interchangeable. ~2008? Item 22 [$50] - Upper stanchions (CSU), black paint, tapered steerer measuring 7.75". Has a gouge near the top that was filled with enamel. ~2013? Fox 34 Parts: Item 6 [$50] - CTD cartridge with external fine compression adjuster. As I recall this came from a 120mm Fox 34 29er, but not certain. Cracks in the bladder, but no leaks. ~2014? Item 7 [SOLD] - FIT damper. 2015 or newer? Item 8 [$90] - FIT damper. 2015 or newer? Item 9 [$60] - TALAS air spring. ~2013? Item 10 [$60] - TALAS air spring. ~2012? Item 11 [$50] - Float air spring. I think this came from a 140mm 29er, but I don't recall for certain. ~2015. Fox 36 Parts: Item 12 [$90] - Damper, RC2, from a 150mm 29er fork. ~2015? Item 13 [$100] - Damper, RC2, from a 170mm 29er fork. ~2018? Item 14 [$80] - Damper, from a 180mm 26er fork. ~2006 Item 15 [$50] - TALAS cartridge. From a 160mm 26er fork. ~2005? Item 16 [$30] - TALAS cartridge. From a 180mm 26er fork. ~2006. Seems to be off internally, though not sure. slides rough-ish. Item 17 [$25] - Float top air cap. From a 26er fork. ~2006. Item 18 [$10] - Damper, from a 160mm 26er fork. Bladder blew out and missing the bottom. Only usable for parts (if that). Item 19 [$75] - Lowers, from a 26er fork. ~2009?. 20mm thru axle not included. Bushings in good shape, though seals should probably be replaced Item 23 [$80] - Upper stanchions, from a 26er fork. Tapered steerer cut to 8.75". ~2009. Item 25 [$25] - 20mm axle from Fox 36. Meant to be clamped in place, but has rescinding lever on the end for rotating. Marzocchi Parts: Item 24 [$80] - 26er uppers and lowers. No damper, no thru axle. 1.5" steerer. Yellow spring included (everything shown). ~2008

Added 7 photos to Buysell
Apr 19, 2020 at 21:48
Apr 19, 2020
Apr 19, 2020 at 21:48
Apr 19, 2020

DVO Diamond 29er Boost Fork (130mm-160mm)

$380 USD
This is a rare brown color. Nominally 160mm travel, but has a 10mm travel spacer in right now bringing it to 150mm. I have two more travel spacers, so 140mm and 130mm are also possible. I would keep this but the steerer is too short for my new build. Steerer: 165mm (6.6') Boost axle OTT adjustment 51mm offset The only trades I'll consider would be a boost fork in 120-160mm range, steerer tube 7" or longer.

Added 11 photos to Buysell
Aug 20, 2019 at 21:02
Aug 20, 2019
Aug 20, 2019 at 21:00
Aug 20, 2019

Commencal Meta 55 Team

$1100 USD
This is a an awesome trail/all mountain/enduro back. Built custom with many new components. Excellent for Raging River, Tiger, Duthie, and all the other trails. This 26er has 140mm rear travel, 150mm up front. This has a single pivot high mount, with a multilink pivot for the rear shock leverage. Overall very stiff and responsive. The frame is 8 years old (though it has been in a closet for 4 years awaiting a fresh build) and has scratches and some chipped paint. No dings/dents though. New items have less than 3 rides, and were put on when I serviced the fork, cleaned and serviced the bearings. Custom Build Notes: -Fox Float 36 RC2 fork -Fox Float RP2 rear shock -Sun Ringle SOS32 rims -Maxxis Ardent 26x2.4 tires (new) -Gravity Gap stem -Gravity Gap 700mm riser bar -Gravity Gap seatpost -Microshift Advent 1x9 groupset (shifter, clutch-type derailleur, 42t cassette) (new) e-Thirteen 1x crankset, 170mm (new) e-Thirteen bottom bracket (new) -WTB Rocket saddle (new) -Avid Elixir brakes -Alligator 200mm sawtooth rotors (Pedals not included)

Added 15 photos to Buysell
Jul 9, 2019 at 21:41
Jul 9, 2019
Jul 9, 2019 at 21:40
Jul 9, 2019

Manitou Swinger 6-way

$70 USD
In good condition. 350lb spring. 12mm bushing size (not 1/2"). 8.8" eye-to-eye (225mm), 1.75" stroke (44.5mm). More travel if the bump stop is removed.

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2020. All rights reserved.
dv56 0.016486
Mobile Version of Website