Madchikken
- Member since Feb 22, 2014
- Erlangen , Germany
- 1 Followers
- 0 Trailforks Points
Recent
Selling
Dec 19, 2021 at 13:08
Dec 19, 2021YT Capra 29 LTD size M
$3200 EURIt's sadly time to sell my much loved YT Capra 29 LTD, number 002 of only 400 produced worldwide that I've owned since it was released in September 2019. It's a size Medium frame thats been well looked after and regularly serviced, but gets little use now due to family commitments.
Spec as as original other than a swap from e*thirteen to Shimano XT Cassette and a change of Sensus grip due to preference. New chain, chainring and brake pads just fitted. Fitted with a 425lb spring instead of the stock 375lb, but can swap back to original.
Frameset: YT Capra 29 Alloy frame, in Raw finish, 170mm travel
Fork: FOX 36 FLOAT Factory, GRIP2 damper, Kashima coating, 170mm (serviced beginning of year)
Shock: FOX DHX2 Factory, Kashima coating, 230mm x 65mm, 375 or 425 spring (rebuilt under warranty by FOX in January)
Crankset: e*thirteen LG1 EN Plus, 170mm, Boost, 32t chainring, e*thirteen BB92 bottom bracket
Chain: Shimano XT 11-speed
Cassette: Shimano XT 11-speed 11-46t
Rear Derailleur: Shimano XTR, SHADOW+, 11-speed
Shifter: Shimano XTR, 11-speed
Brakes: SRAM Code RSC, SRAM Centerline 200mm rotors
Headset: Acros AZX-203
Handlebar: Renthal Fatbar, alloy, 35mm clamp diameter, 800mm width, 30mm rise
Stem: Renthal Apex, 35 mm clamp diameter, 40mm length
Seatpost: FOX Transfer Factory dropper, Kashima coating, 150mm travel
Saddle: SDG Radar Mtn, YT custom orange
Grips: Sensus Swayze
Wheels: e*thirteen LG1 Plus, 110x15mm Boost front, 148x12mm Boost rear, 30mm rim width
Tyres: e*thirteen LG1 Plus and LG1R, 29x2.35
Weight: ~14,6 kg
Size: Medium frame, I’m 173cm and it’s a great fit. See geometry attached with photos.
Collection only in Northern Bavaria (Nürnberg/Erlangen area). No swaps or chance offers.
Selling
Mar 7, 2021 at 9:00
Mar 7, 2021Kona Process 153 DL
$1600 EURSelling my 2014 Kona Process 153DL full suspension mountain bike due to new purchase. I purchased the bike new in 2014, and it has been well maintained since. It’s in a used condition so shows normal signs of wear and tear(scuffs and paint marks, wear to tyres/drivetrain) but there are no dents in frame or damage to suspension etc and mechanically everything works perfectly.
It's a size Medium frame with 160mm front and 153mm rear travel, with a number of upgrades from the original spec of the bike.
The Crankset was swapped soon after purchase to a Race Face Turbine single ring setup, and the drivetrain from 2x10 to 1x11 Shimano XT M8000 in 2017. Headset was replaced when worn and upgraded to a fully sealed Hope Tech unit, and both shock and fork have just been serviced.
The bike has been unridden for over a year hence the suspension service, and both brakes have been freshly bled.
Spec:
Frameset: Kona 6061 Alloy frame with 153mm rear travel. 142mm rear axle
Rear Shock: RockShox Monarch Plus RC3
Front Fork: RockShox Pike RCT3 Solo Air 160mm QR15 axle. Tapered Steerer
Crankset: Race Face Turbine Direct mount crankset 175mm. 30mm axle
Chainring: Race Face Direct mount 32T ring
Bottom Bracket: Race Face PF30 Cinch bottom bracket
Chain: SRAM PC1130 11speed chain
Cassette: Shimano XT M8000 11 speed 11-46t cassette
Rear Mech: Shimano XT M8000 11 speed Rear Derailleur
Shifter: Shimano XT M8000 11 speed direct mount shifter
Brakes: Shimano XT M785 front and rear
Disc Rotors: Shimano XT IceTech 200mm front and 180mm rear rotors
Headset: Hope Tech Upper and Lower bearing
Handlebar: Race Face Atlas FR 800mm handlebar
Stem: Kona 40mm stem
Seatpost: KS Lev Integra dropper post with remote lever
Saddle: WTB Volt Team
Seat clamp: Kona Clamp
Grips: Kona S-LOG grips
Wheels: Shimano XT hubs on WTB Frequency Team i25 TCS rims. Stainless spokes
Tyres: Maxxis High Roller II 27.5x2.4” front and 2.3” rear
Weight: ~13,9 kg
Size: Medium frame, I’m 173cm and it’s a great fit. See geometry attached with photos.
Original product page: https://2014.konaworld.com/process_153_dl.cfm
Original new price was £3999 / €4.399,- and I would accept offers around €1.600,-. No trades, sorry!
Bike is based in Northern Bavaria, Germany, collection only.
Selling
Jan 12, 2020 at 9:46
Jan 12, 2020Kinesis Racelight Aithein Road bike 54cm
$1000 EURSelling my little-used 2016 Kinesis Racelight Aithein road bike. It's 53.5cm but quite long geometry, there's a picture of geometry table in the gallery (as 50cm seat-tube).
Shimano Ultegra 11spd with Mavic Ksyrium wheels and Zipp finishing kit.
Unfortunately it has had little use since winter 2016 when I built it and has only covered around 500km in total, hence the reason for sale.
Spec:
Frameset: Kinesis Racelight Aithein 2016 53.5cm including Kinesis full carbon fork
Groupset: Full Ultegra 6800 2x11spd with 11-28 cassette and 6800 mid 52-36t 172.5mm crankset
Wheelset: Mavic Ksyrium 25 2016 inc. Mavic Yksion Elite 25mm Tyres
Seatpost: 3T Stylus 25 Team Carbon seatpost
Saddle: Fabric Line Elite Shallow (or Fizik Arione CX as in photos)
Handlebar: Zipp Service Course 70 Ergo 420mm alloy bar
Stem: Zipp Service Course 105mm alloy Stem
Bottle Cage: Bontrager XXX Bottle Cage
Pedals: Shimano 105 5800 Carbon SPD-SL pedals
Approximate cost to build was 1800 GBP and the bike is in excellent condition with no real scratches or chips in the paintwork. It would make a great training or winter bike, or even a fast crit racer as it's a stiff frame.
Bike is based in Bavaria, Germany, but willing to ship Europe-wide at extra cost.
I also have available a pair of Specialized Expert Carbon Road shoes in size EU44 for 80 GBP if wanted (160 GBP retail). Have also had little use and can supply pictures if required.
Selling
Sep 6, 2016 at 11:33
Sep 6, 2016Lapierre Zesty 314 Medium size
$750 GBPSelling my much loved 2012 Zesty 314 as it's been in storage for around 2 years with only minimal input to keep it running well and it needs to go to a good home.
Bike is mostly stock with a few upgrades, spec as follows: -
Fox Float RL 140mm Fork
Fox Float RP2 Rear shock
Shimano XT Cranks
Shimano XT Shadow+ Rear derailleur (upgraded with gold Hope CNC jockey wheels)
Shimano SLX Front Derailleur
Shimano XT Shifters (upgraded from original SLX ones which I still have aswell)
Formula RX rear brake with virtually new pads.
Shimano SLX Front brake, brand new (Formula brake had damaged lever/seal, not due to crash, and parts are hard to get hold of)
KMC x.10 chain and Shimano Deore 11-34 cassette
Mavic Crossride 26" wheels
Schwalbe Nobby Nick folding tubeless-ready tyres (upgraded from original Continentals)
Easton Haven Carbon bars (upgraded from original alloy one)
Fizik Gobi saddle
Lapierre seatpost, stem and grips
Weights just under 30lb / 13kg
Bike is in good condition and has been serviced regularly by me (I work in a bike shop), and it's recently been given a nut and bolt strip ready to be sold. Fork and shock have been cleaned up and seals re-lubricated.
It was ridden regularly for a couple of years so has normal signs of wear and tear, but no dents or chips of paint just the odd scuff mark. Also have a spare genuine Lapierre rear mech hanger that will throw in.
Overall it's in good condition and still rides really well.
Would prefer local collection but can box and post at cost to buyer. Able to deliver bike in Berks/Bucks/Oxon, West London or Somerset.
Sensible offers around £800 please