Video: Ripping the New Nukeproof Wheels on the Hillsides of Llangollen

Aug 7, 2020 at 2:22
by Nukeproof  


Words: Nukeproof

To be honest, I’ve nearly forgotten how many weeks or months it was when we launched our new Horizon V2 wheels. Since March days have blurred into nights and weeks into months! But in recent weeks the UK has slowly emerged from a summer of hibernation and the walls of Wales have come down allowing people of the flatlands to visit their beautiful hills (and trails once more. Our destination of choice was One Giant Leap, where we had heard rumours Farmer Martin and his team had been busy building a new downhill track on the hallowed hillsides of Llangollen. For those not in the know, Llangollen is a steep slat ridden hill, that houses some of the finest of UK's downhill tracks and now with the new track some fine, fast drifty corners- worth a trip for sure!.

photo

The test Guinea pigs for the day were Ant Hale and Lil’ Robbo, who as well as trying out the new track were there to shoot for our latest video to promote our new Horizon V2 Wheels. Despite their attempts, no wheels were harmed in the making of this edit- or incredibly since.

If you missed the press release on the wheels the basics premises is this: The Nukeproof Horizon V2 is a fresh start, starting from a clean sheet of paper and are designed and developed by our Northern Irish based team. With over 2 years of development and extensive testing by athletes, staff and locals to ensure they were tough enough for even the hardiest of huckers and could cope with all the conditions us Northern Irish riders experience (98% mud and rain 2% glorious sunshine and dry trails). They now feature high-performance Enduro ABEC 5 bearings. Featuring “LLU/LLB” seal type each bearing has 2 lips which make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate, this combined with Enduro bearings 80% grease fill on both sides to ensure long-lasting performance and quality. This gives complete coverage so there are no dry areas and avoids metal on metal contact /wear. The Horizon V2 hub features rapid engagement to allow riders to lay the power down fast with the hubs 102 points of engagement (every 3.52 degrees).

photo

The rims are all new too, developed to meet the demands of Enduro & Downhill. The Horizon V2 rim uses dynamically aged magnesium-silicon enriched alloy blend to give the stiffness and hardness to 7-series alloy, but the ductility and yield properties of a 6-series. All in all a tough & durable set of performance rims.

photo

Thanks to Martin at One Giant Leap and Jim and the One Planet Adventure, Llandegla team for the workshop use. Also huge thanks to Laurence Crossman-Emms for the camera work and Ben Roberts for piloting the drones.

www.nukeproof.com

Author Info:
Nukeproofinternational avatar

Member since Jun 17, 2015
124 articles

14 Comments
  • 11 0
 Where's the bit of the wheel assembly where the tyre jizz ends up all over the floor, your shoes, the wheel etc etc.
  • 5 0
 Ahh tire jizz. We live in amazing times.
  • 5 0
 For those not in the know, Llangollen is a small bustling market town situated on the gorgeous River Dee. These tracks are just a short ride from the town in the Vale of Pengwern, owned by Martin, one of the nicest farmers you could ever hope to meet. There now that's better!
  • 4 0
 Some fine food and beverage places there too, we can highly recommend a coffee at RiverBanc Cafe or for a larger meal the Corn Mill is pretty sweet, just don't forget to book as it can get very busy (sorry our trip adviser review of Llangollen was a little short, so I thank you).
  • 4 0
 @Nukeproofinternational Are these different hubs than the rebadged Novatec stuff you had used???? What supplier is being used now and what improvements have been employed to resolve the fiasco which were your older generation wheels/hubs?

Since purchasing my Mega 290 which I love as a frame, I chewed through 2 Nukeproof Neutron freehubs and then was 'upgraded' to a Horizon wheelset which I only accepted as it was claimed to have been updated and that the known and constant freehub failures with that wheel were resolved. Of course I managed to shred the drive ring and subsequently ovalize the hub shell as well with Horizon wheel and any of my riding buddies can attest that although I'm a reasonably competent rider, I'm hardly cranking out the miles many folks do since I have two small children and other priorities these days. I'm also nary 190lbs so I'm no clydesdale either.

Needless to say, having 3 periods of downtime as a result of warranty issues sucked. I've also been a bit miffed as the old hub failures were well publicized by way of customer and professional reviews and it was shared with me that the Horizon hub problems were addressed. After two years of constant issues, lost ride time (which I cherish due to my limited ride time), I was finally met with a sorry, but it's been 2+ years so no more warranty claims. Frankly these issues should have been a total recall of your wheel products IMO so I bit the bullet and acquired a real and user serviceable rear hub to lace up and use from DT Swiss.

For those considering these wheels, I'd maintain a level of skepticism until either real customer reviews come in or Nukeproof can indicate that real actions have been enacted upon to address massive design or outsourcing flaws that resulted in hubs that couldn't be used for actual mountain biking......
  • 13 0
 These Horizon V2 hubs are 100% new and from the outset we have worked hard to ensure that these are reliable. With regards to the older generation V1 hubs, our engineers worked long and hard to re-engineered these with the factory to improve the reliability. Whilst we totally understand and apologise for your frustrating experience and loss of ride time, the returns were no where near a level that requires a recall, which we stand by the warranty on (subject to normal T&c's).

We are 100% confident in the new wheel sets. In fact, as a way to rebuild your trust drop me a DM on here and I will send you a new set to try out.
  • 1 0
 @Nukeproofinternational: Thank you for the DM. As my frustration level was high upon my initial message and this is a public forum I think it would be fair of me to add some additional color to my original post that I shared with you in my DM in fairness to the PB community.

For the other readers/commenters - One thing I left out was that there were some details pertaining to some communications that were shared with me by the retailer (ChainReactionCycles) as part of the warranty process I was involved in that compounded the issues with my situation. Long story short, ChainReactionCycles made certain assurances and claims to me that influenced my decision surrounding the warranty options they presented to me. I'm extremely skeptical these claims were true based on how things panned out and when I ran into my last round of freehub issues there was no acknowledgement or recognition that maybe perhaps they shared inaccurate or uninformed information with me.

I'm happy to have my trust earned back (although I can be a stubborn about this stuff sometimes) and unlike CRC I appreciate desire to be credible.

PS - Nukeproof never completely lost my trust. I'm still constantly blown away by my bike. If only I had a bit more time on my hand and wasn't hemorrhaging money with the house, I'd be pinching pennies for one of the Dissent 29ers.....
  • 1 0
 I wonder if the new 2021 - 2022 model bikes will just come with in house parts making the bikes even cheaper for customers? That would be great especially if the in-house parts perform like the top end makers. I’ve tried their carbon bars and flat pedals and loved them, and they are already cheap to buy from CRC.
  • 4 0
 I've been riding these wheels for the past month. I'm really impressed with them. Fantastic choice for the price.
  • 1 0
 @hardtailparty Do you have a review video in the works? Would be interesting to hear your thoughts!
  • 3 0
 @dhrideruk: Yes. Spoiler: they're my #1 recommendation for budget wheels. Not too stiff, not heavy, and fantastic engagement. I feel like they might be a little soft with rim dings, but even in the rocky terrain of Sedona on a hardtail, I haven't had a pinch flat yet (knock on wood). I'm impressed with them.
  • 1 0
 @hardtailparty: well if your riding where it’s rocky, on a hardtail and not having issues then it sounds like they are fine!
  • 2 0
 I want this yellow Mega..
  • 2 0
 These wheels and hubs look amazing. I’d love to try them out.







Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv42 0.079750
Mobile Version of Website