Added 2 photos to Buysell
Mar 7, 2019 at 12:57Mar 7, 2019
Mar 7, 2019 at 12:57Mar 7, 2019
Nukeproof Horizon Carbon bar 31.8mm diameter 12mm rise 800mm width 9° backsweep 6° upsweep Used for around a dozen rides and only selling to get a different rise. Will post for an extra £5 or can meet around Birmingham/Merseyside depending on work.
Added 5 photos to Buysell
Mar 5, 2019 at 10:57Mar 5, 2019
Mar 5, 2019 at 10:54Mar 5, 2019
Burgtec direct mount stem 50mm length 31.8mm handlebar diameter Only selling as new frame is a different colour and it just doesn't look right Collection from Birmingham or possibly Merseyside depending on work, will post for £5.
Added 12 photos to Buysell
Mar 5, 2019 at 10:35Mar 5, 2019
Mar 5, 2019 at 10:28Mar 5, 2019
Dt Swiss E532 rims, 29 inch, 30mm inner width Black Hope Pro 4 boost hubs Dt Swiss spokes Tubeless valves installed Sram 10-42 11speed cassette Wheels are in great condition, custom wheels built 11th July by Chain Reaction, used for 7 rides then I got offered some Carbon wheels dirt cheap so kept this set as spare for a few months and now up for sale. Few small marks which I have photographed on the rims, running true and will get my local shop to check tensions etc before they are posted. There's an 11 speed sram cassette fitted which is around 18 months old that i took from my old wheels which is unfortunately stuck on the XD driver body. Whoever installed the cassette to my old wheels over tightened it and it's completely stuck on, luckily the hope cassette drivers just pull off the hub body for servicing and can be pushed back on afterwards so it can be kept running perfectly. Once the cassette is worn out you will need to buy a new driver body which are around £50 new, this is the reason the wheels are being sold cheap so think of the 11 speed cassette as a bonus, I paid £350ish the have them built so it's still a big discount for wheels that have barely been used! Happy to post or do a local collection, sometimes work around Merseyside so could potentially meet around Birmingham or Liverpool.
Added 1 photo to Buysell
Sep 1, 2018 at 2:50Sep 1, 2018
Added 7 photos to On-one
Jun 17, 2018 at 9:56Jun 17, 2018
Jun 17, 2018 at 9:49Jun 17, 2018
On One Codeine 650b/ 27.5 wheel size Medium Frame 242x12mm rear axle 150mm travel Rockshox Monarch Debonair rear shock Hope BB - read below!! Powdercoated frame with custom headtube badge done by previous owner Bought this frame on a bit of a whim last year as I fancied building my hardtail into a full sus for the winter, now bought a new Cotic Bfe frame so this has been stripped again and is ready for a new owner. I used it quite a lot over the winter and even let a mate take it for an uplift day at Cwmcarn. Frame is badass to ride, I built it with a 160mm fork which gives a 64 degree head angle and reach around 450mm so is very aggressive to ride. Spent a few days riding the DH at Forest of Dean and some local stuff at Kinver Edge, took it all in its stride really is a mega frame! Frame is in a great condition overall, paint has lost its shine a little bit on top tube and chainstays where kneepads/ shoes have been rubbing, other then that it looks sweet Shock is running perfectly, I have it rammed full of bands as I like a bike to ramp up nicely, also means can run it at slightly lower pressure so it's nice and supple off the top. Tracks well with loads of grip, frame has a nice bit of flex built in so it rides brilliantly, especially when the conditions aren't great which they usually aren't in the uk Unfortunately there is a bit of an issue with the frame, a previous owner has crossthreaded the BB on both sides, ive got no idea how but ot turns out the world is full of idiots! I had taken out the BB before I was aware there was an issue, when I bought the frame I wasnt made aware of this so had no idea there was anything wrong. Luckily there is a bright side!! The BB and frame have kept a matching thread so you can actually take out the BB and it will go back in no problem, you just can't fit another BB without a bike shop cutting the threads again. There is a Hope BB fitted atm which are designed to be serviceable, the bearings pops out of the cups and there is an adaptor fitted atm for Sram GXP, pop out the adaptor and it will run any 24mm axle so all is not lost. You would only need to change the BB cups if you wanted to run a 30mm axle, if you are running 24mm then it will never need to be removed again, majority of cranks are 24mm this is unlikely to be an issue, unless you don't like the red cups. If you have anymore questions feel free to get in touch, don't let the BB issue put you off i can honestly say it runs perfectly now and won't be an issue unless you desperately want a new BB. May be willing to look at PX if you have something I fancy.