Block user

Recent

Jun 26, 2020 at 5:55
Jun 26, 2020
Added 6 photos to Buysell
Jun 26, 2020 at 3:52
Jun 26, 2020
Selling
Jun 26, 2020 at 3:50
Jun 26, 2020

Evil Calling, Fox 36, Burgtec, Maxxis enduro

$2850 GBP
Evil Calling 2020 FOX Factory 36’s (Kashima Coated) 150mm travel and GRIP 2 damper. 2019 Rockshox deluxe damper with custom 140mm tune by Slick and slide suspension. Hope pro4 hubs with enduro rims and Tubeless Stans setup, covered in Maxxis Highroller 2 and DHF tyres. SRAM Guide T brakes with 4pot Calipers 200mm rotors front and rear Sram GX cranks with brand new bottom bracket and 32t Burgtec Chain ring Brand new 10-50t cassette and KMC gold chain and XT deraliure plus shifter Rockshox reverb stealth 150 dropper post with dry break fittings and up rated 1xLever for full dropper speed and bar location adjustment. Burgtec Carbon enduro handle bars with burgtec mk2 50mm stem and Burgtec Greg Minar signature grips Burgtec cloud on Carbon edition seat Burgtec mk4 pedals Brand new set of frame bearings plus comes with 2 brand new swing arm bearings still in the packet 2019 frame Invisi wrapped from new, some small marks as expected with a used bike.

Added 10 photos to Buysell
Nov 16, 2019 at 3:11
Nov 16, 2019
Selling
Nov 16, 2019 at 3:07
Nov 16, 2019
Added 9 photos to Evil-Cailling
May 1, 2019 at 5:52
May 1, 2019
May 1, 2019 at 5:50
May 1, 2019
Added 3 photos to Kona-Mahuna
Jan 24, 2016 at 3:16
Jan 24, 2016
Selling
Jan 24, 2016 at 3:15
Jan 24, 2016

kona mahuna 29er Mountain Bike

$450 GBP
Kona Mahuna 29er Hardtail Mountain bike. Covered in the helicopter tape (clear plastic tape) to help reduce scratches from new. Still some general scratches on the frame and cranks. Brand new upgraded Rockshox TK Gold solo air forks with remote lockout, fitted just before Xmas and have never been ridden on as I've damaged my back. These are a £230 upgrade, plus the controller at £60. Upgraded WTB ST19i 29er tubeless capable wheels. Only reason I'm selling is due to a bad back. Specs below are of the standard bike FRAME MATERIAL Kona 7005 Aluminum Butted SIZES 16", 18", 19", 20", 22" REAR SHOCK N/A FORK Suntour XCT LO 100mm CRANKARMS FSA Dyna Drive CHAINRINGS 42/32/22t B/B TH 7420 PEDALS Wellgo LUA9 CHAIN KMC HG40 FREEWHEEL Sram PG820 11-32t 8 spd F/D Shimano Altus R/D Sram X4 SHIFTERS Sram X4 BRAKE CALIPERS Avid Elixir 1 FRONT BRAKE ROTOR Avid G2 180mm REAR BRAKE ROTOR Avid G2 160mm BRAKE LEVERS Avid Elixir 1 HEADSET TH ZST No.10 HANDLEBAR Kona Aluminum Riser STEM Kona Control SEATPOST Kona Double Clamp SEAT CLAMP Kona QR GRIPS Kona Race Light LOG SADDLE Kona XC FRONT HUB Formula REAR HUB Formula SPOKES Sandvik Stainless 14g RIMS WTB SX23 FRONT TIRE Vittoria Saguaro 29x2.2" REAR TIRE Vittoria Saguaro 29x2.2" Kona Race Light 7005/6061 is a lighter, more performance-oriented fabrication of our 7005/6061 Aluminum tubing. Designed to meet Kona's discerning race specifications, Race Light 7005/6061 uses custom butting to create thicker tubes at weld areas and important parts of the frame, providing incredible strength and torsional integrity to the feel of the ride. We remove wall thickness in other parts of the frameset to lighten up the bike, providing the perfect balance between quickness and stiffness. The emphasis here is on performance, lightness and speed built the Kona way. COMPACT REAR TRIANGLE Short chainstays and seatstays provide a perfect balance of stability and power transfer when out of the saddle and pedalling hard. Shorter seatstays also have less deflection during braking and accelerate faster than longer stays. The shorter rear triangle also helps the bike to negotiate tight-twisting sections of trail. Our new Entourage short-travel downhill bike is a good example of an incredibly compact rear triangle. Our goal was to create a bike that was easy to jump and trick, and could also corner aggressively. With seatstays measuring just 415mm, we've created one of the most nimble short travel DH bikes in the industry. INTERNAL HEADSET By having the headset bearing located inside the headtube (called zero stack), rather than the top and bottom, we are able to achieve a number of advantages when it comes to front-end stiffness, durability and overall riding performance. The major benefit of an internal headset is the extra layer of protection it provides the bearings against the elements. Additionally, the bearings are commonly available angular contact bearings, which are easily and inexpensively replaced. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. CASH ON COLLECTION SPD PEDALS & MUD GUARD NOT INCLUDED

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.032746
Mobile Version of Website