We're excited to introduce the MX Mount for our Altitude and Altitude Powerplay platforms, which allows for a quick and easy conversion to a mixed wheel size setup while maintaining similar geometry to the stock platforms. The MX Mount is available for purchase for $136 USD on www.bikes.com and is compatible with all Altitude Carbon 29" models, and Altitude Powerplay Carbon 29" models.Altitude 29
The Altitude combines decades of racing experience with our latest technology innovations that allow you to ride harder and faster than ever before. With the new Altitude MX Mount installed, you’ll be able to use a 27.5” rear wheel to help corner faster, ride more playfully, all while giving you a bit more clearance when you’re behind the saddle on a steep, technical line.
When you install the Altitude MX Mount, you will increase the travel of your Altitude or Altitude Powerplay while also lowering the rate curve. This means you might have to increase shock pressure or go up in spring rate to achieve proper sag and suspension feel.
The Altitude MX Mount is easy to install and maintains similar geometry to the regular Altitude 29. The Altitude MX mount is designed to be compatible with Positions 1-5 of our RIDE-9 adjustment system only. Position 5 is the “Neutral” position, and the bike becomes incrementally slacker and more progressive as you move towards Position 1, the slackest position. Positions 6-9 have less clearance between the back of the seat stay brace and the seat tube and are incompatible with the use of the Altitude MX Mount.Altitude Powerplay
The Altitude MX Mount is easy to install and maintains similar geometry to the regular Altitude Powerplay. The Altitude MX mount is designed to be compatible with Positions 1-4 of our RIDE-4 adjustment system only. Position 4 is the steepest position, and the bike will become incrementally slacker and more progressive as you move towards Position 1, the slackest position.
For more information on the MX Mount, visit www.bikes.com/mx-mount
Video by: @scottsecco
Photos by: @Margus