Block user

Recent

Selling
Apr 3, 2018 at 10:48
Apr 3, 2018

Kona Process 153

$2000 USD
This bike is a destroyer! Super quick in and out of corners and loves to pop off of anything. I got a new bike last season and this one sat all year! New frame bearings have a few months of riding on them. Shock is new. Crankset and BB are new. Frame has some rubs from my old bike rack. $2000 OBO FORK Rockshox Pike RCT3 160mm REAR SHOCK FOX Float X, New (warranty replacement for a previous shock) CRANKARMS SRAM X1 NEW CHAINRINGS 32t Narrow/Wide NEW B/B SRAM GXP NEW R/D Sram XX1 SHIFTER Sram XX1 BRAKE CALIPERS SRAM Guide RS FRONT BRAKE ROTOR SRAM Centerline 200mm REAR BRAKE ROTOR SRAM Centerline 180mm BRAKE LEVERS SRAM Guide RS HEADSET Chris King HANDLEBAR RaceFace SIXC 35, 20mm rise, cut to 780mm width STEM RaceFace Atlas 35, 35mm length NEW SEATPOST Rockshox Reverb 150mm drop SADDLE RaceFace Aeffect FRONT WHEEL Spank Spike enduro race 28 REAR WHEEL Spank Spike enduro race 28 FRONT TIRE Schwalbe Magic Mary 27.5x2.35" REAR TIRE Maxxis Minion DHF 3C EXO TR 27.5x2.3"

Selling
Feb 17, 2018 at 20:16
Feb 17, 2018

New Race Face Chester pedals - black

$40 USD
This is a new set of Chester pedals that I'm not using because I'm staying on clips. Never installed. $40

Selling
Feb 17, 2018 at 20:11
Feb 17, 2018

REDUCED - New RF Turbine dropper 175mm w/ 1x remote

$220 USD
I bought a Race Face Turbine with 175mm drop to put on my new bike, but am not tall enough to make it work. Post was dropped into the frame to gauge length, but never fully installed. Brand new with a black 1x turbine remote. RACE FACE TURBINE 175MM DROPPER SEATPOST Diameter is 31.6 Post length is 490mm Turbine 1x remote lever - black $220

Selling
Feb 17, 2018 at 20:02
Feb 17, 2018

REDUCED - New KS Lev Integra 150mm 31.6, w/southpaw

$210 USD
KS Lev Integra 150mm drop with the Southpaw Lever. 31.6mm diameter. New take off from a 2017 Kona Process 153 DL.

Selling
Feb 17, 2018 at 19:55
Feb 17, 2018

WTB Asym i29 TCS new take offs 29"

$300 USD
New WTB Asym i29 TCS 29" take offs from a 2018 Kona Process 153 29 AL/DL. FRONT HUB Formula 110x15mm REAR HUB Formula 148x12mm RIMS WTB Asym i29 TCS Taped with Stans tape, ready to go tubeless. 6 bolt rotor hubs. Hub body is XD driver. Ready to shred! $300

Added 1 photo to Buysell-photos
Feb 4, 2018 at 21:54
Feb 4, 2018
0 comments – Add comment
Selling
Feb 4, 2018 at 21:53
Feb 4, 2018

Kona Process 153 Custom Build

$3600 USD
This bike is a destroyer! Super quick in and out of corners and loves to pop off of anything. I'm shrinking the number of bikes in my garage, so this one is heading to a new home. The fork is a brand new 2018 36 warranty replacement with zero rides on it. Wheels are sweet, laced up to some sick Hadley hubs! Some scuffs on the rear derailleur and rims. New chain, brake pads. $3600, buyer pays shipping FORK Brand new 2018 FOX Float 36 Factory 160mm HSC/LSC REAR SHOCK FOX Float X2 CRANKARMS RaceFace SIXC Carbon CHAINRINGS 32t Narrow/Wide B/B RaceFace R/D Sram X01 SHIFTER Sram X1 BRAKE CALIPERS SRAM Guide RSC FRONT BRAKE ROTOR SRAM Centerline 200mm REAR BRAKE ROTOR SRAM Centerline 180mm BRAKE LEVERS SRAM Guide RSC HEADSET Cane Creek HANDLEBAR RaceFace SIXC 35, 20mm rise, cut to 780mm width STEM RaceFace Atlas 35, 50mm length SEATPOST 9 point 8 Fall Line dropper post 175mm SADDLE RaceFace Aeffect FRONT WHEEL RaceFace ARC 30 rim, 32 hole, Hadley hub REAR WHEEL RaceFace ARC 30 rim, 32 hole, Hadley hub FRONT TIRE Maxxis Shorty 3C EXO TR 27.5x2.5" REAR TIRE Maxxis Minion DHR2 DD TR 27.5x2.3"

Selling
Jan 30, 2018 at 14:56
Jan 30, 2018

Price reduced Kona Process 111 Custom Build

$2999 USD
Price reduced. 2017 Kona Process 111 Selling my short travel shredder from last season. This bike is a ton of fun to ride and crushes on the up as well as the down! Suspension has been fully serviced with 0 rides since. Fork had the crown steer unit replaced by Fox with the service. The Float X was custom valved to the proper size to give more support with the piggy back compared to the stock shock. New chain, BB, brake pads. This is a dialed build that can shred! $2999 OBO FORK FOX Float 36 Factory 140mm HSC/LSC, setup with 20mm Thru-axle REAR SHOCK FOX Float X. Custom valved to the 184x44mm stock size CRANKARMS RaceFace SIXC Carbon CHAINRINGS 32t Narrow/Wide B/B RaceFace (new) R/D Shimano XT SHIFTER Shimano XT BRAKE CALIPERS SRAM Guide FRONT BRAKE ROTOR SRAM Centerline 200mm REAR BRAKE ROTOR SRAM Centerline 180mm BRAKE LEVERS SRAM Guide RS HEADSET Cane Creek HANDLEBAR RaceFace SIXC 35, 20mm rise, cut to 780mm width STEM RaceFace Atlas 35, 50mm length SEATPOST 9 point 8 Fall Line dropper post 175mm SADDLE RaceFace Aeffect FRONT WHEEL RaceFace ARC 30 rim, 32 hole, DT Swiss 350 hub REAR WHEEL RaceFace Turbine R rim, Vault hub (120 points of engagement) FRONT TIRE Maxxis Shorty 3C EXO TR 29x2.5" REAR TIRE Maxxis Aggressor DD TR 29x2.3"

Selling
Jun 4, 2017 at 20:39
Jun 4, 2017

Custom Kona Process 111 DL

$2000 USD
If you haven't ridden a short travel 29er, you need to get on this bike and point it down some stuff you don't think it's capable of! This has been a great bike for me and is being replaced with a new bike. A lot of upgraded parts, new parts, and custom built wheels! Fork bumped up to 140mm for shredding! Cane Creek angle set used to slacken the HA by .5 degrees and drop the BB to a good height! Some scuff marks on the right seat stay and the top tube. A couple small dings in the rear rim. $2000 plus some shipping depending on location REAR SHOCK 2017 RockShox Monarch RT (brand new take off 2017 Kona Process 111) FORK 2015 RockShox Pike RCT3 Solo Air 140mm QR15 Tapered CRANKARMS RaceFace NEXT SL carbon 175mm CHAINRINGS 34t B/B RaceFace Pressfit PEDALS Shimano XT Trail CHAIN SRAM PCX1 CHAINGUIDE E-Thirteen top guide FREEWHEEL SRAM XX1 11-42t 11 spd R/D SRAM XX1 SHIFTER SRAM XX1 BRAKE CALIPERS Avid XO Trail FRONT BRAKE ROTOR 180mm REAR BRAKE ROTOR 160mm BRAKE LEVERS SRAM Guide RS HEADSET FSA Cane Creek Angle Set .5 degree slacker HANDLEBAR RaceFace SIXC 35, 20mm rise STEM RaceFace Atlas 35, 35mm length SEATPOST RaceFace Turbine 150mm drop (BRAND NEW), w/ Turbine 1x lever (red) SADDLE RaceFace Aeffect red FRONT HUB DT Swiss 350 QR15 REAR HUB DT Swiss 350 142x12mm RIMS Spank Oozy Trail 295, 32H, red (25mm internal width) FRONT TIRE Schwalbe Magic Mary 29x2.35 Super Gravity, Trail Star REAR TIRE Maxxis High Roller 2 29x2.3, 3C, Exo

Selling
May 30, 2017 at 18:17
May 30, 2017

Brand New Lyrik RCT3 160mm take off PRICE DROP!

$750 USD
This is a brand new Lyrik RCT3 taken off my 2017 Kona Process 153 DL. Super awesome stealth black logos! Crown race is already pressed on. Steer tube is 7.5" long. Non-boost spacing. $750 As the Lyrik recognizes that what goes up must come down, it combines climbing dexterity and downhill agility through its BoXXer-derived user tunable rebound damping with internal shims, and stout 35mm FastBlack anodized uppers. This RCT3 Charger Damper system features efficiency circuits (Pedal and Lock) which sit behind the performance damping, resisting changes on extended downhills while having excellent small bump sensitivity on relentless climbs. Zooming in on the often overlooked basics, the clever Maxle Ultimate 15mm thru axle requires but one hand for removal or installation, while still providing the benefits of a 15mm thru axle. The Lyrik RCT3 27.5 Fork Solo Air: The Solo Air option lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously, keeping them in perfect equilibrium. FEATURES Charger damper: resistant to damping changes on extended downhills while having excellent small bump sensitivity Three position damper adjustment: open, platform and locked Threadless aluminum steerer with 35mm low friction black anodized upper tubes Travel Gradients are conveniently located on the upper tubes so that you always know how much travel you are running

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv56 0.014032
Mobile Version of Website