South5southy

TRADE FOR 160+ ENDURO Ok so this is my (almost) full custom stumpy which I have ridden since about march 2021… the bike is an absolute climbing beast and has carried me up and down the South Downs way many times. It will tackle the bike park element (BPW, rogate Dh, tidworth etc…) and is as easy to chuck around in the air as some 26ers I’ve ridden (which says something). I’m only selling as I’m riding more heavy DH than I used to! Specs are as follows (I will list the custom bits and bobs) STOCK Frame - is large but definitely specs down to a medium (I'm on the top side of 5'11 and its a bit too small for me) M5 hydroformed tubing, EVO geometry, tapered headtube BEARINGS RUNNING PERFECTLY, PF30 BB, ISCG ’05, Command Post BlackLite routing, 142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 135mm travel some scratches, but this is usual for a frame this age. Cranks SRAM S-1250, 7050 alloy arm PF/BB30 spindle Wheels Roval 29, alloy disc, 24mm internal rim width, 32h Front Hub - 15x100 TA Rear hub -142x12 TA CUSTOM Fork Rockshox pike RCT3 (A2) 150mm debonair air spring will include 140mm air spring - upgraded to 150mm to slacken head angle for rougher stuff, definetly makes the bike more bike park friendly Shock Rockshox monarch Plus rc3 Debonair air can 135mm travel (just replaced seals) CAN INCLUDE ORIGINAL FOX CTD SHOCK (would need a service) Drivetrain Shimano xt 1x11 (cassette is 11- 46) BRAND NEW shifter cable and outer Hope PF30 BB (bearings running smooth) - I think hope call this a pf46 but it is a pf30 in reality BRAND NEW 32t narrow wide chainring BRAND NEW KMC chain Cockpit Renthal fatbar 10mm rise DMR death grips (thick soft in marble pink) Canyon G5 stem (not sure of length) Avid trail nines (four pot front and rear) and yes they are the carbon ones. Feel free to msg me with any questions Cheers!