Stan's is Auctioning Off Kyle Strait's (Unused) Custom Rampage Wheelset for NICA

Dec 11, 2017 at 13:58
by Stans NoTubes  
photo

Every fall, some of the most skilled free riders in the world challenge themselves and each other to conquer incredible lines at the Red Bull Rampage in Utah. We chatted with Cameron Zink and Kyle Strait, two former winners who finished second and eighth respectively this year, for a behind-the-scenes look at what it’s like to compete in the Rampage.

Stan’s NoTubes: You guys combined forces with Pierre Edouard Ferry to create the line you rode straight down the heart of Rampage. When did the three of you decide to do that, and who pitched that idea?

Cam: I had a plan to ride that line before I got there and didn’t want to leak it out until we essentially staked our claim on our line during the first dig day allowed at the venue. I went straight to the top to claim the line even though I had been in bed for three days with some horrible stomach problems prior and probably should still have been in bed. Pierre and Kyle were there thinking the exact same thing! It was perfect because building it turned out to be a lot more time consuming than we had originally thought, and we needed the combined effort of all three teams of one rider plus two diggers.

Kyle: It would have been on the site check day. We all had the idea to try and go from the top since seeing it the previous year. All of us decided that we would work on it together to make it ride-able and as “safe as possible”. Haha!

photo

Stan’s: What’s the morning of Rampage look like? Coffee? Breakfast?

Cam: I’ll have my whole kit, bag and bike ready to go. I’ll get up, make breakfast and hang out with the kids for a little bit before venturing out. The best thing you can do is keep it as autonomous as possible and think as little as possible, but stay happy and busy so that your mind doesn’t wander.

Kyle: Yep, get up before the sun, get some breakfast going, and set up all your gear, kits, goggles, gloves, extras... I usually roll my back out on a foam roller to make sure I’m all in line then load up, get out to the site. Once unloaded, I try my best to warm up on the bottom features and try to stay as calm as possible.

Stan’s: What are you guys doing while the other riders are on their runs? Do you watch every one?

Cam: I try to stay relatively informed and watch some of them, but I don’t want to let it ruin my focusing on what I need to do. There is a small chance that you will change up minor things in your run based on how the judges are operating that day or the wind or even based on what other riders are doing, but usually there is nothing you can do but ride your own event and not compete against anyone but yourself.

Kyle: Some riders I enjoy watching, and others make me nervous to watch. I pretty much just focus on my line unless I’m sharing a line like Zink I and did. Then you are pretty much riding together and watching how the others ride the line, too.

photo

Stan’s: How much time goes into bike setup? Are your Rampage bikes set up much differently from your regular bike setups?

Cam: I am constantly setting up my bike and evolving it. When I was younger, I wasn’t as adamant about set up, but now that I have been on so many film trips and competed so many times, I like to take the guesswork out of it. By just checking tire pressure and suspension settings before you ride - even on a normal, small day - it becomes so much easier to distinguish why the bike is doing what it does and how to set it up for any situation or line that you plan to ride.

Kyle: Most of the set up goes into suspension tuning. We have a good idea of what we want from doing the event over so many years. The hardest part is getting the high speed rebound correct since I run such a high spring rate for the event. Big drops equal big springs. Tire pressure is pretty standard for me at the Rampage which would be 35 psi in the front and 40 psi in the rear. [Editor’s note: Kyle ran tubeless front and rear this year.]

Stan’s: It’s a competition, but all the riders seem to support each other. How much communication goes on during the dig and during the event?

Cam: We are brothers in arms. I’ve been fortunate to have never been in battle or war, but we all say the same thing; it feels like going off to war. Kissing your wife or girlfriend goodbye, knowing how gnarly everything is about to get and realizing the inherent risk of death and injury. We are competing, but we all love progressing the sport and watching our friends succeed. In a perfect world, everyone will land a run, nobody gets hurt, and you walk away proud. That happened for the first time ever this year.

Kyle: There are lines that cross everywhere, and everyone is trying to make the sickest line they can so it can get a little crazy out there. But for the most part, we like each other and try to work with other riders to make sure lines are safe for each other, and we work it out.

Stan’s: Kyle talked with us about how the crowd and announcers sometimes think that riders are building suspense or checking the wind, when what you’re actually doing up in the start gate is math: calculating risk and reward. What don’t people know about Rampage and riding at this level?

Cam: It looks absolutely nothing like it does on TV. I am always amazed watching the event while hearing people talk about how gnarly it is. When I watch it on TV, it looks boring and small. You can’t give it perspective or express the level of risk and scale unless you are there. It is unreal. So when the wind is ripping on TV, people don’t really understand what is going on. There are jumps and wind scenarios that are literally impossible, so we have to wait it out. And then if you land your run and the judges don’t like what you did, there isn’t much point in doing another one. Landing your run is a huge win in itself; it’s just a bonus if the judges like it.

Kyle: For me, it’s all about risk vs reward. I lay it all out on the line, and if it doesn’t came back the way we were planning, it makes it then not worth the risk. This year at the top, I watched 99 percent of the riders not score more than 0.55 of a point even if they had a much better run that was cleaner, smoother and/or included better tricks. So, I looked at that, and for me, it turned out not to be worth risking the extra tricks to score just half a point. It was a tough decision, but I am happy with what I decided. I’d say that my first run this year was one of my best in my Rampage career, and I walked away from the event healthy, so I’ll take that.

photo

You Could Own Kyle Strait's One of a Kind Custom Camo Flow MK3 Wheelset

Stan's NoTubes, Onyx Racing, and Kyle Strait have teamed up to auction off a one of a kind custom camouflage Flow MK3 Wheelset! All proceeds from the auction will go to NICA, the National Interscholastic Cycling Association. Helping develop the sport of mountain biking and getting more kids on bikes is something that's very important to all of us, and the money that this wheelset raises will be donated to NICA to help their mission to get #morekidsonbikes.

photo
You're looking at an exact replica of the wheels created for Kyle's 2017 Rampage bike. Stan's and Onyx got together to build these limited edition camo and orange wheels just for Kyle. How limited edition? Because riding off cliffs tends to be hard on equipment, we built two wheelsets for Kyle, but his first set handled the whole event (and are still going strong), so these backup wheels never even needed to come out of the box.

Now they can be yours. Only two riders in the world will have this special camo and orange Stan's/Onyx wheelset: Kyle Strait, and maybe you!

Check them out here!

Photos by Kenny Wehn

Author Info:
StansNoTubes avatar

Member since Oct 21, 2014
23 articles
Must Read This Week
Sign Up for the Pinkbike Newsletter - All the Biggest, Most Interesting Stories in your Inbox
PB Newsletter Signup

78 Comments
  • 94 0
 I can't see the rims.
  • 19 1
 Follow the valve, here you go
  • 13 21
flag WAKIdesigns (Dec 14, 2017 at 8:18) (Below Threshold)
 @qreative-bicycle: you win many internets today
  • 19 0
 Connect the dots of the spoke nipples with a sharpie on your screen. Then you can more easily tell where the rim should be.
  • 4 5
 What rims...?
  • 8 2
 @MortifiedPenguin: i just tried this and it worked pretty well, but i can't get the sharpie off my screen. how did you get it off??
  • 3 5
 @VTwintips: good that you didn't use a ball pen...
  • 5 0
 @VTwintips: sand blaster. Worked great.
  • 2 0
 @VTwintips: 200 grit sandpaper
  • 3 2
 @MortifiedPenguin : Havign issuea refaing the screem now. please hlep.
  • 11 2
 If I wanted a rim job I’d ask your mother.
  • 6 2
 Flow MK3 is badass. Laced mine like tank with DT Swiss Champion spokes and brass nipples and Magic Mary DH 2.5x26". They have held up against anything I threw at them on a Mondraker Summum downhill bike. They only leaked air once during a year. It was on the rear when I was doing jumps on cliffs with 20 psi or less. I weigh 110kg geared up. Next one wheelset will be Arch MK3 for Foxy XR trailbike.
  • 2 0
 Good to know. I'm gonna build up a newset of Hope Pro4 hubs with MK3 Flow rims to sell.
  • 2 0
 What hub and gauge spokes? When the rim works that well it's also because you found a perfect combo.
  • 1 0
 @LoganKM1982: Champions are 2.0mm straight gauge spokes. However, the 2.0-1.8-2.0 Competitions are actually lighter and more resistant to fatigue.
  • 1 0
 @seismicninja: Dont get too excited about that build combo. My CRC Hope pro4 /mk3 flow rear wheel build didnt last a year, before developing rim cracks on every nipple hole on the drive side. Currently orginising a box, to send it across the world for inspection at CRC. ( im 70kg geared up, an it was on a 150mm trail bike/ with no bike park action) Fingers X.
  • 1 0
 @Sparkless: maybe the spoke built too tight/stiff?
Sometimes more flex in the spoke means more durable wheels. Although you maybe want the wheels as stiff as possible for racing though.
  • 1 0
 @zulki-fly: Yes, i think your right about the spoke tension being too high on the initial build. As I was regularly checking both my wheels after fitting, waiting for the traditional new wheel loosening to occur. It never happened, so i just assumed the rim was extra tough or i was getting soft.
  • 1 0
 @Sparkless: sounds like they may have been laced with too much tension.
  • 1 0
 I thought so too, then I tried Spank Rims.... so much better
  • 8 3
 Could you make it a Christmas giveaway? Please!
  • 4 0
 $66 rims and $550 for the hubs....hmmm....no thank you....eBay $1,076
  • 3 0
 Lady ridden - lightly used.
  • 3 0
 Unused! Classic. Can't imagine how many wheels he goes through a year.
  • 3 0
 Item location: Big Flats, New York...
  • 1 0
 Point being?
  • 3 2
 The irony of a rampage used wheelset supporting a cause which won't let wheels go off the ground ???? and has doubletrack courses.
  • 1 2
 Correct: unused wheelset for dh bike
  • 2 1
 Come on dude, it's supporting kids on bikes and that's what matters.
  • 1 1
 @emilyknight: Well, if the organization is actively misrepresenting MTB, not allowing riders to jump, discouraging kids from freeride/dh, and only showing kids how to become dirt roadies, I wouldn't say that's really helping the sport much. Now if it was an organization which encouraged downhill/fr and (typically underexposed parts of mtb), dh/freeride advocacy(trailbuilding), especially in city centers, where many kids are located, and provided them with an outlet to race that affordably, that would be a cause. Right now in its current state the organization seems to view XC MTB as a "safer", lower liability, lower skill version to either road racing or DH/anything other than XC rather than putting MTB in its own light, supposedly leading to a sense of pride and accomplishment. However, dumbing MTB down has no benefit for anyone. People will not learn to really ride, put in the work, nor even truly be exposed to the sport if all they are doing are doubletrack fireroads.

TL;DR

If NICA truly represented MTB by exposing kids to real trails, jumps, and features, it would be beneficial for the youth and MTB.
  • 1 0
 This is so awesome! Way to support a program that gets so many kids on bikes! Thank you, Stans!
  • 2 0
 Hell, I'd buy the used set.
  • 1 1
 I was actually curious about Kyle's maintenance of his bike. When he was dropping in, his breaks sounded atrocious...
  • 17 1
 Your grammar is atrocious.
  • 3 0
 Metal brake pads, SRAM Code brakes. I know the sound all too well...
  • 3 1
 Damn Strait white males
  • 2 1
 They’ll fit perfectly on my 29’er
  • 1 0
 £861 with 7 days left. Ouch.
  • 3 3
 Sun ringle was doing camo way before the "duck dynasty" posers came out everything else is just a rip off!!
  • 2 1
 Why not make it a raffle? Seems like it would make more dollars.
  • 2 0
 I say this every time as well - seems like a no-brainer. $2000 = 400 entries at $5 each. Probably hit that in the first day and go well over that. Would be more money than these will likely sell for.
  • 2 0
 Not 26, I’m out!
  • 1 0
 Got any 26” wheelsets you don’t want?
  • 1 0
 Makes post about rim auction *doesnt show pictures of the wheels*
  • 1 0
 Frame them?
  • 2 0
 Google Volumetric diffusive respirator
  • 1 1
 I love my onyx hubs. Cool to see more high profile riders riding them.
  • 1 0
 Totally silent ?
  • 2 0
 Yup. 100% silent. As quiet as my front hub. By far my favorite component on my bike.
  • 9 10
 I am pretty sure a dentist will win the auction. :-)
  • 6 0
 Good thing he has 100,000 some odd hours before he can look at Pinkbike again.
  • 7 2
 Battle of the dentists!
  • 9 1
 Maybe an orthodontist will win for a change. #lookingoutforthelittleguy
  • 2 0
 @MTBingSpartan: RIP. We didn't deserve that poor soul.
  • 2 0
 @rebel12: or a dental tech. What about the receptionist? They all deserve a chance
  • 3 6
 I'll just go to Wal-Mart and buy my own camo wrap for way cheaper.
  • 1 0
 Yup! Camo duct tape! Can use for rim liner, gear strap, 1st aid kit!
Below threshold threads are hidden







Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.035843
Mobile Version of Website