Theriderboyes

Specialized Turbo Levo FSR Expert Carbon 6Fattie E-Bike Completly original components only thing would be the grips are worn along with the rear of the seat. Battery is at 100% health only 982 miles curently on the bike. Has a few scratches from shuttling on top tube and some on the chain stay from it falling on its side. Looking to get $8250 or trade for a enduro E-Bike Charger included Pedals aren’t included but can throw in the plastic ones that came with it if wanted if you have any questions just give me a shout otherwise all of the parts are listed below Wheel Size 27.5 Battery Capacity 504 Wh Display/Remote Trail Handlebar Remote, motor mode switch & walk-assist Modes Turbo, Trail, Eco, Walk-Assist Max Speed with Assist (32 km/h) Frame Material Carbon Fiber Frame Material Details FACT 9m carbon front chassis, M5 Alloy rear triangle, Integrated down tube battery, enclosed internal cable and Command Post IR routing, fully sealed cartridge bearings Rear Travel 135mm Rear Shock RockShox Monarch RT3, Rx Trail Tune, AUTOSAG, rebound and 3-position compression adjust, 197mm x 48mm Fork Öhlins RXF 36, Single-Tube design, air spring with adjustable 3rd chamber, adjustable low speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset Fork Travel 150mm Head Tube Diameter Tapered Headset 1 1/8" (41.8mm x 30.5 x 8mm, 45x45°) Campagnolo Standard compatible upper bearing 1.5" (42mm x 40 x 7mm, 45x45°) lower bearing Handlebar Specialized Trail, 7050 alloy, 8° backsweep, 6° upsweep, 27mm rise, 780mm, 31.8mm clamp Stem Specialized Trail, 3D forged alloy, 4-bolt, 6° rise Grips Specialized Sip Grip, half-waffle, XS/S: regular thickness, M/XL: XL thickness Brakes SRAM Code R, 200mm front / 200mm rear rotors Brake Levers SRAM Code R Drivetrain 1x Shifters SRAM X1, 11-speed Rear Derailleur SRAM X01, 11-speed Chainguide Top guide Cranks Custom alloy crankarms Chainrings Forged steel, 32 tooth Chain KMC X11ET, 11-speed with missing link Cassette SRAM XG-1175, 10-42 tooth Rims Roval Traverse Carbon 27.5, hookless carbon, 38mm inner width, 24 front / 28 rear spoke count, tubeless ready, hand-built Hubs Specialized, sealed cartridge bearings, 15mm x 110mm front / 12mm x 148mm rear spacing Spokes DT Swiss, stainless steel Tires Specialized Butcher 2.8" GRID casing, Gripton compound, tubeless ready Saddle Body Geometry Henge Comp, hollow chromoly rails, 143mm Seatpost Command Post IRcc, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, S: 100mm, M/L/XL: 125mm of travel Seatpost Diameter 30.9mm Seatpost Clamp Standard, single bolt Rear Dropout / Hub Dimensions 12mm x 148mm

2018 Yt tues cf pro race in excellent condition Has ride wrap, deity speedway carbon bars(uncut) fox 40 with grip 2 damper, carbon rims and cranks too Willing to sell or trade for the following bikes: Norco range, Rocky Mountain Slayer, Trek Slash, or any high pivot enduro bike that is of medium size I will consider any enduro if its right so just send me some pictures and info on what you have. Has brand new brake pads as last ones got contaminated. Only 5 rides ever on this bike. Pedals not included Frame size is large but fits 5’7-6’ Selling as would like something that with lesser travel If you have any questions just text or email me

Good condition Yearly maintenance done. Few minor things but otherwise great bike. Just give me a shout at 403 816 6509 for a parts list Will respond to message on here Retail $9,500 Asking $5,150 Trades excepted for another bike of similar value and will add cash for the right enduro or DH