- Member since May 1, 2022
- Male / 38
- Castle Rock , Colorado
- 0 Followers
- 6 Trailforks Points
Mar 6, 2023 at 13:01Mar 6, 2023
Weeble19 edspratt's article
Jan 27, 2023 at 7:38Jan 27, 2023
Jesse Melamed Joins the Canyon CLLCTV Enduro Team
Posted in "Recommend body armor"
Nov 30, 2022 at 20:37Nov 30, 2022
Posted in "A-holes at Trestle, 10/2"
Nov 30, 2022 at 20:31Nov 30, 2022
Posted in "OTG Goggles: for those who MUST use glasses under goggles. My personal experience. What you use?"
Nov 30, 2022 at 20:03Nov 30, 2022
Nov 1, 2022 at 14:18Nov 1, 2022
Shimano XT 8120 complete setup$550 USD
I have a brand new front and rear Shimano XT 8120 caliper and lever set along with (2) 203 used rotors and (1) 180 used rotor. Rotors were measured at 1.7mm (start at 1.8 thick and Shimano recommends changing at 1.5 so still plenty of life). I sent a set of calipers and levers in for warranty service to Shimano and they took too long so I ended up buying a different brake setup. Shimano replaced the calipers and levers with brand new ones but I have no need for them now. Also including all my Shimano service equipment including bleed kit with syringe and funnel, and about .75 liters of mineral oil. I’m including a spare set of NO4C sintered metallic pads which are apparently pretty hard to come by right now. The pads in the calipers are the metallic pads and they’re brand new as well. This everything you need to get rolling (or stopping) aside from the mounts for the rotors. There’s a mount for the 180 rotor but you’ll need a 203 mount if you don’t already have one. Prefer local buyer but willing to ship at buyers expense. Venmo or PayPal.