Block user

Recent

Selling
Jul 12, 2019 at 8:14
Jul 12, 2019

Industry Nine i9 Gravity / Grade 29

$600 USD
For sale is a Industry Nine Gravity 29 wheelset that I used with my Pivot Switchblade before selling it. They are like new with some small scratches from 3 rides. The rear hub is 12x157 (not super boost spacing) and the front hub was converted to boost using the conversion endcaps and professional redishing. I also sent an email to Industry Nine service asking if new spokes would be needed if the hub was swapped for a non DH hub and they said no. Claimed weight of the wheels are 1950g and were 1970g on my scale with tape. Here are the specs: Intended use: downhill Alloy rim, tubeless ready (580 grams) Rim width: 33.5mm outer / 28.5mm inner 15mm thru-axle front hub 12 x 142mm rear hub ( 9/10 spd aluminum freehub body w/ 120 point, 3 degree engagement 32 Aluminum 2.8/3.0mm butted spokes Weight: 1,950 Grams In the Pinkbike review the stiffness and steering stability of these stood out to the reviewer: https://www.pinkbike.com/news/industry-nine-gravity-29-wheels-review-2014.html Looking to get $600 shipped with PayPal included for these. Please let me know if you have any questions or would like more detailed pictures. Thanks for looking.

Selling
Jul 8, 2019 at 17:13
Jul 8, 2019

Pivot Switchblade Race XT 29 - Medium

$3600 USD
For sale is a medium Pivot Switchblade that I bought in 2017. I am the original owner and have sadly only ridden it on a local test ride and two rides at GWNF shortly after I got it. It's in excellent condition with some small scrapes on the rear derailleur and rear axle, a small mark on the non-drive side chainstay, and a scrape on the end of the drive side crank arm which is all pictured. Selling because it's just been hanging in my garage the past two years. The 17mm lower headset cup is currently not installed and will be included. Everything is pretty much stock besides the Industry Nine Gravity 29 wheels, CrankBrothers Highline dropper post, Pivot Phoenix carbon handlebar, and RaceFace Turbine stem. The I9 wheels are not super boost 157. The rear hub is DH 12x157 and the front hub was converted to boost with endcaps and professional redishing. I believe that these wheels have more recently been renamed from "Gravity" to "Grade". They are super stiff and I really had no complaints about them. You can read more about them here: https://www.pinkbike.com/news/industry-nine-gravity-29-wheels-review-2014.html Here is the complete build list: Product: Pivot Switchblade Race XT 1x 29 Bike Rear Travel: 135mm Rear Shock: FOX Float DPS Black Fork: FOX 36 Performance, Black, Boost 110QR Fork Travel: 150mm Headset: Pivot Precision Sealed Bearing Handlebar: Phoenix Carbon Riser 740mm Stem: RaceFace Turbine 50mm, 35mm clamp Grips: Phoenix Lock-On Brakes: Shimano Deore M615 Drivetrain: 1x Shifters: SLX 1x11-Speed Rear Derailleur: Shimano XT 11-Speed GS Cranks: Race Face Aeffect SL 175mm Chainring: 30 Tooth Bottom Bracket: PF92 Chain: FSA 11 speed Cassette: Shimano XT M8000, 11-42 Tooth, 11-Speed Tires: Maxxis High Roller II, 29x2.3", TR Saddle: WTB Vigo Team Seatpost: CrankBrothers Highline 125mm Seatpost Clamp: 35mm Quick Release Looking to get $3600 shipped. If you want the Sun Ringle Charger Comp 29 wheels that came with the bike I can do $3200 shipped. Buyer pays any applicable PayPal fees. Please let me know if you have any questions or would like more detailed pictures. Thanks for looking.

Selling
Jul 8, 2019 at 16:13
Jul 8, 2019

Canfield EPO - Medium

$650 USD
For sale is a medium Canfield EPO frame in excellent condition. This is the updated version with internal dropper cable routing, but still non boost 12x142. I am the original owner and only rode it 5 or 6 times locally. No major blemishes except a scrape on non-drive side chainstay that is pictured. Comes with headset and rear thru axle. It's an awesome hardtail. I had no complaints and found all the reviews about it being capable and playful to be true. I'm only selling because I'm sadly not doing much mountain biking these days. Looking to get $650 shipped for the frame. Buyer pays PayPal fees if applicable. Please let me know if you have any questions or would like more detailed pictures. Thanks for looking.

Selling
Jul 5, 2019 at 8:44
Jul 5, 2019

Chromag Dolomite Seatpost 27.2

$50 USD
For sale is a 27.2 x 400mm Chromag Dolomite seatpost. Fully functional with some light scratches as can be seen in the pics. Looking to get $50 shipped with PayPal included. Please let me know if you have any questions and thanks for looking.

Selling
Oct 30, 2018 at 14:31
Oct 30, 2018

Factor O2 - 54cm *Price Drop*

$1700 USD
For sale is a 54cm Factor O2 frame including a Wheels MFG ceramic PF30 bottom bracket, frame inserts for mechanical groupsets, and a Black Inc seatpost with clamps for both carbon and non-carbon railed saddles in excellent condition with only about 300 miles. This is the same frame ridden by team A2GR in the pro tour this year and has a claimed weight of 740g with clearance for 28mm tires. It is comparable to any lightweight climbing bike such as a Canyon Ultimate, Specialized Tarmac, Cervelo R5, BMC SLR01, Giant TCR, etc. There are a few cosmetic blemishes including a small scrape on the inside of the right chainstay, a small mark mark close to the left rear dropout, and some paint chipping where the front brake mounts which I've sealed with clear nail polish and is hardly noticeable with the front brake installed. Please note that there is not room for any spacers below the stem. The last picture is what it looked like built up with Sram etap and Zipp 303s. Love it, it's just a little too big for me and I've got some bills to pay. Asking $1700 obo. Buyer pays shipping and any applicable PayPal fees. Please let me know if you have any questions and thanks for looking.

Selling
Oct 16, 2018 at 12:43
Oct 16, 2018

Specialized Power Arc Pro

$150 USD
For sale is an installed, but never ridden 143mm Specialized Power Arc Pro saddle. There are some light marks on the painted rails which is unavoidable when installing because it chips so easily. Asking $150. Buyer pays shipping and any applicable PayPal fees. Please let me know if you have any questions and thanks for looking.

Selling
Oct 16, 2018 at 10:51
Oct 16, 2018

Sram Force 22 Groupset with Crank Option

$450 USD
For sale is Sram Force 22 Groupset with approximately 2000 miles on it. Never crashed and fully functional with some light blemishes from normal use. I've taken close ups of the more noticeable ones and there is small tear in the right shifter hood. Comes with your choice of GXP or BB30 crankset, both 170mm, and either new take off 53/39 or used 50/34 chainrings. The cassette is 11/28 but will probably need replacing soon because I swapped the wheelset it was installed on between different bikes. Asking $450. Buyer to pay shipping and PayPal fees if applicable. Please let me know if you have any questions and thanks for looking.

Selling
Jul 22, 2018 at 10:58
Jul 22, 2018

Praxis Buzz Chain Rings - 52/36

$60 USD
For sale are some 110 bcd 52/36 Praxis Buzz chain rings that were used about 300 miles before they were swapped out for a different size. Here are the specs: 110BCD - 48/32, 50/34, 52/36 | 130BCD - 53/39 For both 5-arm AND 4-arm w/hidden 5th (like SRAM Exogram) Includes a long and a short replaceable threaded chain catch pin Cold Forged | Hard Anodized 7075-T6 Aluminum Works with 10/11sp drivetrains | Highly suggest KMC, Shimanoâ„¢ or Campy chains Great for use with Di2, EPS, or eTap shifting systems Asking $60. Buyer pays shipping and applicable PayPal fees. Please let me know if you have any questions and thanks for looking.

Selling
Jul 22, 2018 at 10:55
Jul 22, 2018

FSA SL-K Crankset - 170mm

$180 USD
For sale is a 170mm FSA SL-K carbon crankset with 52/36 chainrings that was used for about 200 miles before I sold the bike that it was installed on. I had a protective skin on the arms so the arms look like new with the exception of a small scuff on the drive side crank arm and a small nick at then end of the non-drive side arm which are pictured. These are the latest version of the cranks which I've read are more reliable and stiffer than the previous versions. According to a road bike crank test conducted by Fair Wheel Bikes: Complete Weight: 651.6 Grams Price: $649 Spindle: 30 mm Deflection-D: 4.32 mm Deflection-ND: 6.70 mm Average Deflection: 5.51 mm S/W: 2.784 The SL-K comes in as the lightest of the major manufacturers. 7th out of 20 in weight. Deflection came in at 9th out of 20. Overall stiffness to weight ratio was up to 8th overall again beating all the major manufacturers. Same nice build quality, good selection of lengths (165+) and good looks as the K-force and with rings that shift well. Also like the K-force this SL-K is a 386 Evo standard which gives it compatibility with just about every bottom bracket standard on the market. http://blog.fairwheelbikes.com/reviews-and-testing/road-bike-crank-testing/ Like the article says, the BB386EVO spindle will fit almost every bottom bracket standard (threaded/BSA, BB30, PF30, BBright, BB86, etc.) with the right bottom bracket and/or spacers. I will do my best to help you figure out if it will work with your bike if needed. Asking $180. Buyer pays shipping and any applicable PayPal fees. Please let me know if you have any questions and thanks for looking.

Added 14 photos to Buysell
Jul 21, 2018 at 8:55
Jul 21, 2018
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.026270
Mobile Version of Website