Jan 17, 2021 at 18:58Jan 17, 2021
Selling a nearly new 150mm RockShox Pike Ultimate RC2, 29", 42mm offset, Boost (Model ID: FS-PIKE-ULT-B4). The steer tube is cut to 184mm (should be fine for nearly all bikes/stems). This fork was bought on October 15, 2020 (receipt available) and has been used for maybe max 10 rides on the local mountains here. Condition is excellent with absolutely zero scratches or anything else on the stanchions. Some very minor marks on the lowers from where the brake hose touched and where the mudguard was attached, but you need to focus to see them. Mechanically no issues at all and it works like fresh out of the box (and it comes in the original box). Selling it because I was able to get my hand on an Ext Era and I couldn't resist. Can be picked up (or viewed) in North Vancouver or I can ship it also (shipping costs will need to be covered by buyer and I will have to insist on pre-payment). No tax applies - price is 950CAD all in, so quite a bit cheaper than in the stores and just as good.
Added 4 photos to Buysell
Jan 3, 2021 at 16:14Jan 3, 2021
Jan 3, 2021 at 16:13Jan 3, 2021
Selling a brand new Endura MT500 Thermo L/S Jersey in size Small. I just tried it on for size and labels are still attached. Ordered it online from oversee with some other items and unfortunately it's just a bit too small for me. I'll be looking for the same one in medium. It would be great for riding during these cooler days. Can either be picked up in North Vancouver or I'm happy to ship it also (shipping costs will need to be covered by buyer and payment in advance required).
Aug 14, 2020 at 17:56Aug 14, 2020
Selling my Trek Slash 9 in custom raw aluminium finish - it's in a very good condition and while the frame is from 2015 it has had a ton of high-quality upgrades over the years (many in 2018) and maintenance was always done. It's ready to hit the trails and I can guarantee you that it will still deliver many years of fun. Original parts: - Trek Slash 9 frame in Medium/18.5" (virtual) - I stripped the paint of the frame and it now rocks a beautiful raw look. No need to care about chipping paint and a quick polish fixes all little scratches. The frame has some cosmetic dents, but is in great shape overall. - RockShox Pike RC2 Dual Position, 160mm (regular maintenance done, no scratches at places it matters and has not seen much use since end of 2018 as it was mounted on my secondary bike) - RockShox Monarch RC3 DebonAir (regular maintenance done) - SRAM X1 1400 cranks Upgraded parts: - DT Swiss EX1501 Spline wheelset (DT Swiss 240 hubs!) with Rear: Maxxis Highroller II EXO with Schwalbe ProCore, Front: Schwalbe Magic Mary (tubeless) - RockShox Pike was tuned by Swiss suspension tuning company Akira - Fox Transfer Kashima 150mm dropper post with Specialized saddle - Chris King PressFit Bottom Bracket & InSet Headset (regular maintenance done) - Shimano XT drivetrain with 11-46 XT cassette and 30t OneUp Switch DM oval chain ring - Hope stem - Thompson carbon handlebar Included spare parts: - RockShock Monarch Plus+ DebonAir rear shock (My main shock had an issue that got fixed under warranty and I needed one on short notice to complete my bike vacation...) - Spare Dropout - Some spare Enduro bearings (not quite the complete set for the frame, but nearly) I'm happy to provide further information to serious buyers and the bike can be looked at in North Vancouver (Upper Lonsdale). I would prefer to sell to a local buyer, but can consider shipping the bike also under the condition of pre-payment and covering of all shipping & packing costs (I know that shipping to the US will be at minimum 150CAD and the buyer will be responsible for any import duties). Given the condition of the bike, all the upgrades and the included spare parts I consider the price as fair and as firm for now.
Added 7 photos to Buysell
Apr 23, 2020 at 17:37Apr 23, 2020
Apr 23, 2020 at 17:34Apr 23, 2020
Selling a Production Privee - Shan 27 917 Limited Edition steel hardtail frame (size M) in very good condition. The frame is a real beauty in my opinion, is super fun to ride and not exactly seen often. It's intended for 27.5" wheels and a 160 or 150mm fork (I believe a 26" wheel conversion kit/hanger is available also and might be available on the Production Privee website). The following items are included: -Frame -Production Privee Headset -Production Privee Seat tube clamp -Spare hanger -Some spare parts for cable routing -Sticker set While the official size of the frame is a M, I personally find it's more a S. Size is also the reason I'm selling it as I just felt it was a bit too small for me (1.76m), but I went ahead and got another Production Privee Shan frame in L as I loved it otherwise. It's a super agile frame and the short reach makes it super playful, especially on the tighter trails on the North Shore. Other than a couple of paint chips the frame is still in a perfect condition and has absolutely no damage beyond the mentioned purely optical things. Would love to see someone continuing to have fun on this frame! Happy to answer further questions and I can ship the frame within Canada (upon pre-payment and buyer covering shipping costs) or arrange for a contactless handover in North Vancouver. Please note that I think the frame is priced very fairly at $250CAD and at this moment in time I'm not open to negotiations (resp. for people with a passion for negotiations the starting price is $300CAD ;-) ). Update regarding shipping costs: Within BC: shipping cost is between $25-$30CAD East coast Canada: shipping cost is between $45-$50CAD US buyers: the cheapest shipping option I can find is around $130CAD, I'm happy to use another service if anyone can find a cheaper option that's not too much of a hassle for me.
Nov 13, 2018 at 20:16Nov 13, 2018
Selling my Manitou Mattoc Expert 27.5" fork with 160mm travel (non-boost, QR15). I bought the fork in late 2016 for my second bike (Hardtail), that being my second bike wasn't ridden often. The fork was fully serviced and updated in August 2018 and I added the IRT upgrade (Infinite Rate Tuning - allows you adapt end progression) for a total cost of 195 CAD. The non-IRT cap and also the Manitou Hexlock axis will also be included with the fork. Has been ridden only a couple of times since the service has been done. The fork is in an excellent condition with hardly any signs of wear and absolutely no scratches on the stanchions. Steer tube is cut at 166mm. Prefer local pick-up of the fork, but will ship if required. Contact me if you have any questions.