Powered by Outside
Block user


alanbonk mikekazimer's article
Jul 17, 2024 at 11:09
2 days
First Ride: Spot Mayhem 140 - A Trail Bike With a Titanium Leaf Spring
@Bluefire: I used to have lots of issues rounding t25's out, until I heard an episode of the escape collective podcast where they talked about the manufacturing tolerances of torx keys. They basically said the sloppy tolerance of the tools leads to most bolt rounding issues. I got a Wera t25 from their recommendation and haven't rounded a bolt since.
alanbonk jessiemaymorgan's article
Jun 5, 2024 at 17:10
Jun 5, 2024
First Look: The 2025 Geometron G1 is More Adjustable & More Proportional
I own a first-gen G1, and the biggest thing I've noticed is that the stability of the geometry allows you to run a quite fast rebound without things getting squirrelly. It feels much more playful than I would have thought.
alanbonk dariodigiulio's article
May 19, 2024 at 8:51
May 19, 2024
Review: 10 Months With Shimano's GE9 Gravity Shoes
With Crank Bros Mallets, you can adjust the pin height to account for shoe wear.
alanbonk CamMcCaul's article
Dec 13, 2023 at 6:38
Dec 13, 2023
alanbonk dariodigiulio's article
Jul 25, 2023 at 13:52
Jul 25, 2023
First Ride: Frameworks Racing Trail Bike Prototype - Crankworx Whistler 2023
@rowyoboat: he's said he runs red Shimano mineral oil in the past if my memory serves.
alanbonk OneUpComponents's article
Jul 18, 2023 at 16:50
Jul 18, 2023
OneUp Announces New Thick and Thin Grips
@mechatronicjf: I've tried the Sensus Emj and the Swayze Single Ply push on's. Big fan of the Swayze push ons - they're on all my bikes. Emj was nice but thicker, I'd say they feel more than 1mm thicker than the Swayze on the bar - not as comfy as the Swayze for my little hands.
alanbonk edspratt's article
Jun 30, 2023 at 6:37
Jun 30, 2023
alanbonk henryquinney's article
Jun 8, 2023 at 8:48
Jun 8, 2023
The Pinkbike Podcast: BMX Backgrounds & Breaking Bikes with Taj Mihelich
I'm with Henry. Precision-Made Chainsaw, Nicolai G1. Have the mutators set up for a steeper head angle from the factory and he'll be set.
alanbonk alicialeggett's article
Jun 6, 2023 at 17:06
Jun 6, 2023
Noga Korem Dropped by GT & Sponsored by Commencal
It's inspiring that Noga persevered despite the chaos, and it's great to see all these sponsors back her up. It's also so exciting to see Alicia's name at the top of articles again!
alanbonk nsbillet's article
Jun 1, 2023 at 12:15
Jun 1, 2023
North Shore Billet Announces New Canadian-Made Talon Cranks
@wydopen: Trailcraft makes reasonably priced options in that size. I bent a set of their 152 cranks with a hard hit on a rock (210lb dude, hard pedal strike riding enduro). Didn't fall catastrophically or anything, was able to ride out with the bent crank. I decided I needed dh cranks, but I wouldn't hesitate to use them in a more reasonable use case.
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login

Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.025817
Mobile Version of Website