baileyt

Nomad 1.5 for sale, also listed on ebay until Weds 26th Sep PM. Ebay add pasted below: - Size is medium, colour is sand. I purchased the frame new from Stif Mountainbikes in Leeds, UK. The frame is a 2008 model which means it was one of the last models hand made in the USA, Pic no.2 shows the signed quality control card, this frame being hand welded by Eric Highlander. I have ridden the bike for its intended purpose so cosmetically the paint has marks - Chainslap to the chainstay and the rear triangle vertical memeber, and being picky some small marks throughout, the decals are also showing signs of wear around the edges. There is also a small dent to the downtube near the BB junction, this was caused by a bouncing rock in the alps this year and does not affect the integrity of the frame. The bike has never been involved in a significant crash. All bolts have been tightened to the manufacturers specified torques and regularly checked, the pivots have never been jet washed and consequently the rear end has been play-free throughout my ownership. The frame will be supplied with the Santacruz seat quick release, but not the Chris King headset shown. I also have a suitable Thomson Elite seat post in silver and an E13 LG1+ for sale. All parts could be supplied at an additional charge. I also have the frame listed for sale on ebay. If you require any othe photographs or information, please contact me. A geometry chart is shown below: Nomad Geometry / Based on 545mm fork (measured from axle to crown). Small Medium Large X-Large Top Tube 21.2" - 53.8cm 22.3" - 56.5mm 23.3" - 59.2cm 23.8" - 60.5cm Head Tube 4.5" 5.1" 5.1" 5.7" Head Tube Angle 67° 67° 67° 67° Seat Tube 15" 17" 18.5" 20" Seat Tube Angle 70° 70° 70° 70° WheelBase 42.7" 44.1" 45.0" 45.2" Chainstay 17.5" 17.5" 17.5" 17.5" BB Height 14.2" - 36.1cm 14.2" - 36.1cm 14.2" - 36.1cm 14.2" - 36.1cm Standover 28.2" 28.2" 28.2" 28.2" Headset 1.125" 1.125" 1.125" 1.125" BB Width 73mm 73mm 73mm 73mm Seat Post (diameter) 30.9mm 30.9mm 30.9mm 30.9mm Front Mech (tp/ts) 34.9mm 34.9mm 34.9mm 34.9mm Rider Size Guide 5'0" to 5'5" 5'5" to 5'10" 5'10" to 6'2" 6'2" to 6'6"

Please see below auction for my BMX on Ebay: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230614216099&ssPageName=STRK:MESELX:IT Fly Pantera 2 BMX, I believe the 2006 Spring colourway - lilac. The build is good for all round riding and has sealed bearings in every part. Spec as follows: * Fly Pantera 2, lilac with colour matched fly bearing covers and sealed fly headset and BB. * Fit S2 forks, heat treated cromo with factory top cap and factory welded star nut. Some rust underneath the stearer tube shown in the headtube pic. * Odyssey MDS sprocket, polished 28t. * Sunday Forumph bar, 8in rise, 28in wide, 12deg back x 4deg up sweep, black, unused. * Odyssey Wombolt crank RHD, LTD purple colourway, Odyssey Jim cielincki unsealed pedals. * Coalition Stem, black with gyro plate. * Odyssey Aron ross grips, white with Odyssey par-ends. * Hoffman 10mm sealed front wheel drilled out, 48spoke, odyssey Path Plyte 2.1 tyre, unused. * Gsport Ribcage chrome on Odyssey cassette hub with 14mm axle and 10 tooth one piece driver, Animal GLH slick tyre, unused built by Alans BMX. Chrome plating has lifted from the aluminium rim, the braking track is still in reasonably good condition though as this wheel has been ridden 3 times prior to storage. * Hombre U-Brake and odyssey cable, Dia compe dirt harry lever. * Odyssey Seat post with Shadow Conspiracy slim seat.Good weight 28ish lbs. Complete BMX, sealed bearings all round, and many parts in new condition. I built this up with the intention of riding all round park, trails street etc but due to work comitments i havent had the time. Grab a great bargain, top brands and a modern colourway. I have assorted small parts spares which i will happily include for the winning bidder upon collection (various stickers, pegs and barplugs etc) The condition of the bike is as would be expected for its intended use, some small scratches etc but no serious defects. Some surface rusting has occured to the underside of the fork steerer, I have treated this with automotive rust killer to improve the appearence, though repainting should be performed in the future as this area is subject to significant water spray in wet weather. The front wheel has had material removed from the rim to reduce weight (between the spoke holes), it is up to the buyer and end user to decide whether they feel this wheel is fit for use following purchase. Paypal / Cash on Collection only, The bike is just too big an item for me to ship im afraid. Any questions, please get in touch!