bgoj22
- Member since Mar 21, 2020 O+
- Male / 32
-
San Jose , California - 0 Followers
- 0 Trailforks Points
Recent
Selling
Apr 23, 2022 at 13:20
Apr 23, 2022
Super Boost+ Industry 9 Hydra Enduro S 29 wheelset
$650 USDTake off Industry 9 Enduro S wheelset from my Evil Offering.
Super Boost+ 29inch, XD Driver, silver i9 valve stems.
Only have 40 miles on them while I waited for my carbon wheels to come in. Only blem is a surface scratch that occurred pulling the bike off of the rack in the shop before I rode the bike. Picture attached.
Also have a brand new Microspline Freehub body that I can include for an extra $50 bucks.
Selling
Apr 4, 2022 at 10:04
Apr 4, 2022
Specialized Roubaix Sport
$2700 USDEssentially new/barely broken in 2020 Roubaix Sport. Bought it in June 2020 to be an endurance training bike but haven’t had enough time to split between this and mtb since I’d rather be out on the trails. Garmin has 83 miles tracked on it.
No scratches, scuffs, and essentially no wear except for the brakes being bed in. Comes with owner manual, extra springs for future shock 1.5. Everything is stock Shimano 105 with Praxis Cranks, 105 hydronic brakes, Specialized power saddle.
I will include the Garmin mount, 2 supacaz bottle cages and Shimano spd sl pedals (plastic and inexpensive buy light and reliable) No cleats as I used them on the peloton.
bgoj22 seb-stott's article
Aug 26, 2021 at 16:51
Aug 26, 2021
First Look: Evil's New Loophole Wheels are USA-Made With "FusionFiber"
Nobl wheels are pretty darn good I had TR36s that i thought i would have broken several times on sharp rocks in Tahoe on my last bike but they never even came out of true. I have my second set coming TR37s on green hydras for my new Offering V2.
bgoj22 seb-stott's article
Aug 26, 2021 at 16:39
Aug 26, 2021
First Look: Evil's New Loophole Wheels are USA-Made With "FusionFiber"
I need to point out a couple of things here with your calculation -
1940g claimed weight less 1796 = 144g discrepancy. This would mean an additional 72g per rim. You should have come up with 552g per rim. But even so you're missing some stuff..
Most significantly is spoke weight:
According to Sapim's Site - 64 D-light spokes @ 260mm = 307g. Without knowing the ERD - the actual length of each spoke likely around ~35mm longer per spoke on a 29 inch wheel with a 23.2mm profile height and hydra hubs.
Also not mentioned in your add up are: Valves~10-15g, rim tape ~10g-15g depending on tape and MG nipple washers on each wheel that add ~15g.
Seems like that total built up weight per wheel difference that you're associating to the rim itself could easily and actually associated to things you didn't account for.
