ccasanova108

2014 Jett 29 Comp hardtail, converted to a 1x10. Bike has about a 1,000 miles on it. Tires are set-up tubeless, new rim tape and sealant applied in December 2019 when it was serviced. Rides like new. Selling because I just don't ride it as I am always on my FSR and I am out of space. Bike has been sitting in the house the last few years. Purchased the bike in 2015 new from Specialized, transferable lifetime warranty. Shortly after purchasing the HT, I purchased a full suspension that i ride all the time. Bike has been well maintained is in great shape, there is only one small paint chip located underside of bottom bracket(see picture). Bottom of right crank has some scratches from the rocks, not sure why the left is so clean :). Shifting is extremely smooth, cassette and chain show little wear. Great HT entry-level mountain bike that is very quick and capable. 51mm offset fork RockShox XC32 80mm-travel 29" fork with rebound/preload adjustment, lockout, and custom tenability. Tektro Gemini hydraulic disc brakes with 160mm rotors provide simple, powerful, and dependable stopping power RAM S-1250 XC double crankset with GXP spindle for smooth pedaling performance Shimano Deore rear derailleur for precise shifts KMC X10 SRAM GXP BB for 2pc., 73mm shell Custom SRAM S-1250, 10-speed XC double, GXP Shimano Deore, 10-speed Rapidfire Plus, w/ optical display SRAM PG-1030, 10-speed, 11-36 CHAINRINGS 36/22 Shimano Deore, 10-speed, SGS cage RockShox XC32 TK 29, TurnKey hydraulic damping w/ lockout, coil spring w/ custom women's spring weights, 1-1/8"" alloy steerer, mag disc only post-mount lower, 30mm steel stanchions, preload and rebound adj., 80mm travel, SM/15: 51mm offset Seatpost: Alloy, 2-bolt, 12.5mm offset, 27.2mm Specialized 3D forged 6061 alloy Stem, 4-bolt clamp, 7-degree rise, 31.8mm Specialized flat bar, double-butted 6061 alloy, 660mm wide, 10-degree backsweep, 4-degree upsweep, 31.8mm Specialized Women's Body Geometry XC Contour, Kraton w/ gel, closed end, 120mm, lock-on FRONT HUB - Specialized disc, alloy, Hi Lo flange, cartridge bearings, steel axle, QR, 36h REAR HUB-Specialized disc, alloy, Hi Lo flange, cartridge bearings, steel axle, steel cassette body, QR, 36h Stout Disc 29"", alloy double-wall, 26mm, pin joint, 36h, SPOKES Stainless, 14g (2.0mm)

2020 Niner AIR 9, Medium lightweight aluminum hardtail frame only. Boost 148 spacing, fits up to a 140mm fork with room for oversized, 29x2.4” (or 27.5x3.0”). Brand new in Box, has not been registered so will carry full warranty. I won it in a raffle, but I need a x-small or small frame to fit me.