cepeks
- Member since Nov 12, 2017
- 29
- Leicester , United Kingdom
- 0 Followers
- 0 Trailforks Points
I have an obsessive upgrade disorder...
Recent
Selling
Mar 28, 2023 at 18:00
Mar 28, 2023Specialized Enduro S-Works XL 27.5
$1800 GBPFrame: Specialized s-works enduro 27.5 XL with full invisiframe kit. In excellent condition, just replaced all frame bearings before putting the bike on sale. Only area damaged cosmetically that's worth noting is the drive side chainstay where chain was once dropped. No dings or cracks.
Fork: rockshox lyrik rct3 170mm boost. Has no side sticker for cleaner looks. Very clean and tidy with no scratches rides very smoothly, damping fully working. Had a service last summer
Rear shock: ohlins stx in great condition, very smooth and damping is working. Had service last summer.
Wheelset: brand new stans rims laced onto novatec hubs with sapim cx Ray bladed spokes. Straight and true. Front tyre maxis assegai 2.5, rear maxxis minion dhr2 2.4. Tyres are brand new wheelset is set up tubeless with stans sealant and Peaty's tubeless valves.
Handlebar: specialized s'works 20mm rise 31.8mm diameter 780mm wide.
Seat: specialized railed saddle.
Brakes: Sram guide rsc in excellent good condition cosmetically. Bled them recently. 200mm front 180mm
Groupset: Sram gx Eagle. Mix and and match of new and used parts. Cranks, shifter are brand new, cassete recently taken from another bike and derailleur recently bought used.
Dropper post: rockshox reverb with 1x remote. Goes up and down very smoothly and holds position once up. Has developed a very slight sag of about 5mm. Doesn't bother me so didn't see the reason to service just yet.
The bike is in excellent condition and I tried to nitpick all the smallest problems that I am aware off.
Prefer collection but could deliver at a price of 1£/mile
Selling
Apr 24, 2022 at 16:22
Apr 24, 2022Specialized Enduro S-WORKS 27.5 Large Hope FOX
$1600 GBPBike was stored for over a year. Decided to prep it for this summer season and started with replacing frame bearings a month ago and was going to do full service on the rest of the bike but realized that I don't need enduro bike anymore as I always use my dirt jumper only.
Frame: Specialized Enduro S-Works 27.5. mechanically in excellent condition. cosmetically has quite alot of wear - in some areas the clear coat has flaked off. The frame has full set of shackwrap on it for protection.
Fork: Fox 36 Factory Kashima 160mm 100x15mm non boost. Cosmetically quite worn. Stanchions have a few scratches but none of them are deep enough to affect performance
Rear Shock: Ohlins TTX
Brakes: SRAM Guide RS front and rear in excellent condition. The rear Hose is too short so I have routed it under the top tube.
Stem: Hope
Bars: Easton Havoc Carbon
Seat: Specialized
Pedals: Superstar components
Grips: ergon AG1
Shifter, Cassete, Chain: Shimano XT 11 speed
Derailleur: Shimano SLX 11 speed
Dropper post: Rockshox Reverb 150mm. before storing the bike the dropper was fine but now its saggy and is slow to return.
Hubs: Hope Pro 4
Rims: Easton arc 30 - lots of cosmetic wear but seem straight and true
Tires: Maxxis Minnion DHF and DHF still plenty of life left but the rear tire has developed a hump so could do with replacing.
Bottom bracket: hope - all good
Cranks: hope: all good
Selling
Jun 14, 2021 at 11:43
Jun 14, 2021Canyon stitched frame
$1100 GBPCanyon Stitched 720 Frame Dirt Jump Slopestyle DJ Jumper Dirtjump SS Slope Style. Condition is "Used".
Reasons for a high price: These are being sold only as complete bikes now by canyon. Perfect condition. High demand of high quality SS, DJ bikes and frames. Best colorway ever.
Time of purchase: Bought as a full bike in July 2020
Reason for sale: Bought it to learn dirt jumping but I am too scared to go jumping and never used it for its purpose. Being full suspension it did not make sense to use it to ride street and for commuting so bought a hardtail frame and put all of the components on the hardtail.
Brand: Canyon
Model name: Stitched 720
Purpose: Downhill, slopestyle, dirt jump, street.
Hub spacing: 135x10 - built in chain tensioners
Head tube: tapered to accept tapered or straight forks
Rear shock travel: 100mm
Recommended fork travel: 100mm to 140mm
Bottom bracket: threaded
Brake mount: disc brake International standard
Colour: Matte black - color might look glossy now as I use Muc off bike - protect silicon spray to protect my frames from corrosion and dirt. Will easily wash off with soapy water if needed.
Mechanical condition. PERFECT - nothing else to say really. shock is fully functional and smooth, bearings are perfectly smooth. No bends dents or cracks. The frame had a very easy life and has never been crashed.
Cosmetic condition: The drop-outs have the usual wear caused by bolt on hubs. Downtube near bottom bracket has 2 tiny scratches - not sure how I caused them as I noticed them when taking pictures for sale. Chain - side chainstay underneath the frame has marks from chain slap - caused by me not tightening chain enough on the first 2 days when riding it. everything else is absolutely perfect and it is looking like a new frame.
Included in the sale: Canyon stitched sticker pack, Canyon bag with manuals, receipts, etc. I have never registered for warranty so you might be able to register it. Never used warranties in my life so have no clue how they work. canyon bike box
Will post but would also accept collection. Please feel welcome to message me if you have any questions about the frame. Silly offers will be ignored.
Selling
Oct 28, 2020 at 13:21
Oct 28, 2020Specialized Stumpjumper Elite Fox kashima
$850 GBPThe bike is very well maintained, has no crash marks even on bars or brake levers. A few rub marks and surface scratches around it but no dents or cracks. Excellent condition for its age.
Frame: specialized stumpjumper elite 26" size large. M5 aluminum. In excellent condition including all frame bearings.
Fork: FOX factory 32 talas 100 130 150 mm travel adjustment. Lockout fully functional. Fork is in excellent condition and slides smoothly. 1 small mark on stanchion (see picture).
Rear shock: fox float in excellent condition.
Wheelset: lightweight american classic wheelset. Bearings are in excellent condition. Rear rim has a couple of small dings but is straight and true. Has hope QRs fitted front and rear. Wheels are set up tubeless and tires are in perfect condition.
Bottom bracket: hope threaded in excellent condition.
Headset: hope in excellent condition including hope top cap.
Shimano XTR rear derailleur 9 speed excellent condition.
Shimano XTR front derailleur 2 speed excellent condition.
Shimano XTR cassette and chain
Shimano XT cranks in excellent condition with bashguard.
Shimano SLX shifters in excellent condition.
Specialized saddle
Specialized seat post
Specialized handlebars
Specialized stem
We'll go pedals
Avid elixir brakes front and rear in excellent condition. Recently bled.
Will consider swaps or part exchange
No silly offers
Will deliver personally at 20p/mile
Selling
Sep 20, 2020 at 17:23
Sep 20, 2020Specialized P Slope slopestyle bike
$650 GBPFrame: Specialized P slope 26" in size Larger Slopestyle dirtjump freeride frame. 80mm rear wheel travel. Paint finish is in excellent condition. rear shock is working nicely and smoothly. The rear shock linkage has some play in it so I suspect worn out bushing. frame bearings are running smoothly and been recently replaced. Headset is in excellent condition and bearings are running smoothly, same can be said about bottom bracket. It is a BB30 but has 24mm axle adaptors fitted.
Fork: Marzocchi DJ2. it is fully functional but needs a service at it got sticky. rebound adjustment is fully working. Holds air perfectly. weirdly while fork functions properly it has a loud hammer sound whenever the fork tops out - it only does that when the rebound is fully open. when rebound is adjusted mid-high it doesnt make the top out noise anymore.
Crankset: Race face next SL carbon crankset with titanium spindle. the weight of the crankset is just 450g. I had deleted the 104 pcd chainring mounts as I didnt need such a large chainring for my needs. The 68mm pcd mounts are currently set with 22t chainring. the crank arms are nice and solid. Previously I used this crankset on an extremely light street trials bike build hence the crude modification.
Tyres: Schwalbe table top folding addix in tan walls. some of the lightest tires out there. Front is in perfect condition and rear is 60% used.
Pedals: DMR v12
Front wheel: DMR thret rim laced with HALO wideboy hub. Straight and true wheel.
Rear wheel: Canyon stitched hub laced with Alex fr30 rim: needs a bit of straightening.
Seat and seatpost: Canyon stitched.
Grips: DMR deathgrip
Handlebar: canyon G5
Stem: funn stryga: ( I know this stem is out of place on this bike but i had put it on the bike free of charge just to be able to use the bike)
Chain: KMC half link gold chain.
The bike is not fully finished, it needs a rear brake and a more suitable stem and and the service for fork, sorting out rear wheel, fixing rear shock pivot, etc. this is why the bike is priced so low.
-