Added 11 photos to Buysell
Jul 23, 2020 at 11:47Jul 23, 2020
Jul 23, 2020 at 11:44Jul 23, 2020
This bike has been sick - an absolute shredder. This thing can climb, it can go down, it can do it all. When you push it, it just wants to go harder. A true party on wheels. 27.5” wheels and all the improvements that make it grip and go fast. Wider bars, bigger tires with tubeless setup, and bigger suspension. The bike is from 2015 but the suspension was upgraded with 2019 Fox Factory fork and shock and has been serviced by a local shop per manufacturer’s recommendations. The pivot and hubs have also been serviced on regular intervals. The fork, shock, pivot, and rear hub were just serviced 2 weeks ago. The bike is used so it has some superficial scratches, but nothing too bad. It has standard spacing on the hubs and has a brand new 11 speed drivetrain with 0 miles on it. I’m selling it to get something with less travel. See below for full spec list. Fork: 2019 Fox 36 Factory Series Fit 4 Damper, 160mm, Slik Graphics Turqoise/Silver Custom Decals Shock: 2019 Fox Float X2 RVS Factory, 127mm, Slik Graphics Turqoise/Silver Custom Decals Handlebar: Yeti 780, Carbon, 780 mm (not pictured) Grips: Ergon GE1, Blue Stem: Raceface Aeffect, 50mm (not pictured) Headset: Cane Creek stock Brakes: Sram Guide Ultimate 2 piston Rotors: Hope, 180mm Blue Chain: Sram PC 1110 11 spd Chainring: Sram X Sync NX 32 tooth, 6mm offset Cassette: Sram GX 11 spd Crankset: Sram XX1 Carbon, 175mm Shifter: Sram XO1 Rear Derailleur: Sram XO1 Seat post: 2018 Fox Factory Transfer Dropper Post, 150mm Dropper Post Lever: Wolftooth Components ReMote, Blue Saddle: WTB Yeti Stock Front Wheel: Atomik Carbon, standard hub width Front Tire: Maxxis Minion DHF, 27.5 x 2.5 WT, Exo, Set up tubeless Rear Wheel: Stans ZTR Flow MK3, standard hub width Rear Tire: Maxxis Aggressor, 27.5 x 2.3, Exo, Set up tubeless Hubs: DT Swiss 350 Extras: MRP Bash guard/Chain guide Combo; Mucky Nuts Fork Fender, Blue; Salsa Seat post collar, Blue; Raceface Crank boots, Blue Bike is thoroughly sanitized with alcohol for your safety. Payment through PayPal or cash if local within GA. No trades. IF OUT OF STATE, I WILL COVER SHIPPING (lower 48) via bikeflights.com. If you have any other questions, please just reach out.
Mar 14, 2018 at 15:08Mar 14, 2018
Brand new Sram Centerline 180 and 160 rotors. Payment through PayPal. Shipping at buyer's expense.
Mar 14, 2018 at 15:05Mar 14, 2018
Brand new Easton 55mm stem. 55mm x 0 degrees - 31.8. Payment through PayPal. Shipping at buyer's expense.
Mar 14, 2018 at 15:02Mar 14, 2018
Used 2016 Raceface Turbine Crankset with 30 tooth chainring. Chainring still has life in it. Does not come with a bottom bracket. Payment through PayPal. Shipping at buyer's expense.
Mar 14, 2018 at 12:31Mar 14, 2018
Used 27.5" DT Swiss XM 401 Wheels with 305 hubs. These are tubeless ready, laced, and ready to roll. Have royal blue Slick Graphics custom decals. These wheels are killer! Payment is through PayPal. Shipping at buyer's expense.
Mar 14, 2018 at 12:10Mar 14, 2018
Used 2016 Fox Float DPS Shock. Kashima coat. Custom royal blue Slick Graphics decals. Works great. Shock has been serviced properly. 210mm x 50mm. Custom Tune ID: C2BQ. Payment through PayPal. Shipping at buyer's expense.
Added 18 photos to For-Sale-Pics
Mar 14, 2018 at 12:01Mar 14, 2018
Mar 14, 2018 at 11:58Mar 14, 2018
Used 2016 Fox 34 Fork Factory Series for 27.5" wheels. Black and Kashima Coat, 150mm travel, 222mm steerer length. Not boost. Has been serviced properly. Rebound knob is bent but still usable. New rebound will be included with fork. Payment through PayPal. Shipping at buyers expense.