Block user

Recent

Added 7 photos to Specialized-Enduro
Feb 4, 2018 at 12:55
Feb 4, 2018
Selling
Feb 4, 2018 at 12:43
Feb 4, 2018

Specialized Enduro Coil Edition

$4300 USD
Specialized Enduro Coil 2018. Frame is wrapped in invisiframe ($110 cost), so the frame is in very good condition as most blemishes are to the tape and not frame. I have the stock spring for the fork and shock as well as lighter springs front and rear for a 160 lb rider. Only noticeable blemishes are to the wheels, which have some rock strikes as I live in a rocky area (primarily to the stickers, and I tried to take a picture of an example). I've had the bike for only a few months and it has seem pretty limited use. Fork was overhauled recently due to the factory installing the wrong size bushings initially. Complete fork service was done at the same time. It now feels perfect. Parts are listed below: CHAIN KMC X11, 11-speed w/ Missing Link™ BB Race Face PF30 CRANKSET Race Face Aeffect alloy crank, 24mm spindle, 28t direct mount ring, 6000 series alloy SHIFTERS SRAM GX, trigger, 11-speed CASSETTE SRAM XG 1150, 11-speed, 10-42t REAR DER SRAM GX, long cage, 11-speed FORK Öhlins RXF 36, 29/6Fattie, Twin-Tube design, coil spring, adjustable high and low-speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 160mm of travel REAR SHOCK Custom Öhlins TTX, Twin-Tube design, high- and low-speed compression adjust, rebound adjust RIMS Roval Traverse Carbon 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built SADDLE Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm SEATPOST Command Post IRcc WU, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 34.9mm, 150mm of travel STEM Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise BARS Specialized DH, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 800mm, 31.8mm clamp GRIPS ODI Lock On FRONT BRAKE SRAM Guide R, 4-piston caliper, hydraulic disc, metallic pads, 200mm rotor REAR BRAKE SRAM Guide R, 4-piston caliper, hydraulic disc, metallic pads, 180mm rotor PEDALS None FRAME FACT 11m, X-Wing layout, full carbon chassis and rear end, All Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, alloy link and adjustable shock extension, 12x148mm dropouts, replaceable derailleur hanger, 160mm of travel

Added 3 photos to Push-11-6-Shock
Jan 6, 2018 at 15:27
Jan 6, 2018
Selling
Jan 6, 2018 at 15:25
Jan 6, 2018

Push 11-6 Shock

$715 USD
Push 11-6 rear shock. Set up for a Yeti SB6, which uses a 2.5” stroke, 8.5” eye-to-eye shock. Ridden for about 4 months before I sold the bike it was on. Amazing shock as you would expect for custom shock; the traction and pedaling performance are unreal. Shock set up for rider of 150-165 lbs. Alternate springs are available for purchase if you need a different weight coil. If you have questions, let me know.

csm024 Eastern-States-Cup's article
Sep 5, 2017 at 18:32
Sep 5, 2017
Vittoria ESC: Box Showdown at Blue Mountain, PA - Race Recap
Great race. Thanks Blue Mountain and ESC!
Added 6 photos to Yeti-SB6
Jun 17, 2017 at 18:00
Jun 17, 2017
Selling
Jun 17, 2017 at 17:58
Jun 17, 2017

Yeti SB6 XO1 ($3400) w/ Push 11-6 ($4200)

$3400 USD
Fantastic bike made even better with the Push 11-6 Shock. This bike is a go anywhere do anything machine. Want to go do some bike park laps: no problem. Enduro race: check. All day trail rides: check (especially if it's an aggressive trail ride). Bike was covered with Invisiframe clear protective tape to protect the frame from scuffs/scratches. There is one rock chip on the down tube that I've noted on a photo. I haven't used the yeti touch up paint so that the mark could be seen on the photo. I've knocked a few hundred dollars off the bike due to the rock chip. If you want to see additional photos, just ask. If you want the bike with the 11-6 the price is $4200. If you don't want the 11-6, the bike will come with the stock Fox Float X shock, price is $3400. Build is stock XO1 build kit with the following upgrades: 1 - Fox Transfer Dropper (150mm) - much better than the stock Race Face dropper. 2 - Shimano Zee brakes - much more powerful than the stock SRAM Guide brakes. If you want the guides, I can do a swap for you. Will consider trade for Evil Wreckoning. No other trades. Buyer pays shipping & pay pal fees.

Added 8 photos to Yeti-SB5c
Dec 10, 2016 at 14:05
Dec 10, 2016
Selling
Dec 10, 2016 at 14:01
Dec 10, 2016

Yeti SB5C XL **PRICE REDUCTION**

$4400 USD
For sale is a 2016 Yeti SB5C size XL. Frame is in great condition and wrapped in invisiframe protective tape. Excellent component spec (details below): Chris King Bottom Bracket (turquoise) Chris King headset (turquoise) Rockshock pike fork (150mm) Enve M70 HV wheels - DT Swiss 240 hubs Race Face Next SL cranks Shimano Zee brakes Thomson dropper post Enve handlebar (760mm) Thomson stem (50mm) SRAM XO1 Rear Shifter SRAM X1 Rear Derailleur SRAM XG - 1150 cassette (10-42) Tires - Schwalbe Magic Mary front; Maxxis Aggressor rear The enve rims have some scratches. No cracks and no damage to the rim profile, but I ride in a rocky area and rim scratches happen. New stickers will make the wheels look new. If you have questions, feel free to ask.

csm024 csm024's photo
Dec 7, 2016 at 2:40
Dec 7, 2016
$4500

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2018. Pinkbike.com. All rights reserved.
dv56 0.042519
Mobile Version of Website