Added 8 photos to Buysell
Oct 25, 2019 at 16:38Oct 25, 2019
Oct 25, 2019 at 16:30Oct 25, 2019
Hi all, At long last, I'm selling my much loved but under-utilized size small 2017 Evil Wreckoning. This is a custom built bike, put together by Fanatik bicycles in Bellingham, WA and ridden ~ 2200 miles since then. I'm the original owner. The build was centered around DH, and I've used it as a park and shuttle bike over the last 2 years but looking to sell at this point as the bike isn't getting the use for which I intended. I swapped the fork for a 170mm, Grip2 damper Fox 36 with a short offset (46 or 44mm, can't recall - stock is 51mm). Bike will ship without pedals, with the stock Monarch RC3. For $200 extra, I will include either a Float X2 or a Cane Creek IL Coil to go with the stock Monarch. Wheelset is mismatched as the original rear wheel was a custom built wheel with an Onyx rear hub, and I was dissatisfied with the performance of the Onyx hub and sold the rear wheel separately and replaced it with a high-engagement RaceFace Turbine rear wheel. Front wheel is a Nox Farlow 29 carbon rim laced with DT competition spokes to an I9 torch hub, 32 hole w/15x110mm boost spacing. As I mentioned, the bike was intended for DH use so I slacked it out with a -1.0 degree Works Components headset, and am running MaxxGrip Assegai front and WTB Judge Tough/High Grip rear with Huck Norris rim strips front and rear. This brings the head angle of the bike to roughly 64.5 degrees in the "low" setting, would go to 64.0 in the "x-low" setting. Frame has scattered scratches and wear marks; please request additional pics as needed. No cracks obviously, and bearings are running smooth. No trades, prefer local pickup but will ship as needed. No rush to sell so please do not offer me 3 used tires from your Pontiac Firebird, or your selection of favorite 80s VHS tapes ;-) Frame: Small EVIL Wreckoning 161mm Travel UD Carbon, Internal Dropper Routing, Integrated Upper Guide, BOOST Shock: Rockshox Monarch Plus RC3 Debonair, 216x63 Headset: Works Components -1.0 degree fixed headset Fork: 2018 Fox 36 170mm Grip2 Performance Elite w/MRP ramp control cartridge and short offset (44 or 46mm, can't recall) Handlebar: Raceface SIXC Carbon 35, Rise: 20mm, width: 750mm Stem: Raceface Atlas 35, Length: 35mm Grips: Ergon GD1 Brake: Front SRAM Code RSC 200mm Centerline Rotor Brake: Rear SRAM Code RSC 180mm Centerline Rotor Shifter: SRAM X01 Eagle, 12sp Rear Derailleur: SRAM GX Eagle, 12sp Cassette: SRAM XG-1295 Eagle, 10-50t:10,12,14,16,18,21,24,28,32,36,42,50 Chain: SRAM X01 Eagle w/Powerlock Crankset: SRAM Eagle XO1 Carbon, 30mm Oval ring, 175mm crank length Bottom Bracket: Hope threaded 73mm BSA Wheelset - Front: Nox Farlow 29 carbon rim laced to I9 Torch 15x110mm Boost spacing front hub with 6-bolt rotor Wheelset - Rear: RaceFace Turbine Rear wheel, boost spacing, 6-bolt rotor Tire - Front: Maxxis Assegai 29x2.5WT MaxxGrip, tubeless w/huck norris rim strip Tire - Rear: WTB Judge 29x2.4 Tough/High Grip, tubeless w/huck norris rim strip Seatpost: KS Lev Integra 150mm internal routing, 0 setback, 34.9diameter Saddle: SDG Ti-Fly
Added 5 photos to Buysell
Sep 24, 2018 at 14:52Sep 24, 2018
Sep 24, 2018 at 14:51Sep 24, 2018
Hi all, I'm selling my Onyx hub laced with DT competition spokes to a Nox Farlow 29 carbon rim. Hub is 12x148 (boost) spacing. Wheel was built by Fanatik Bike Co in Bellingham, WA as part of an Evil Wreckoning build. It is 12 months old and has seen a fair bit of use, with usual scratches. Bearings are still running smoothly, it has never had to be trued (I only weigh 130 lbs) and the wheel is functioning as new. Retail for this wheelbuild is $900-1000 depending on how you build it. Nox Farlow rims are 29mm IW. Onyx hub is well known for having very low drag and instant engagement, and is completely silent. Brass DT swiss pro lock nipples used. Here's your chance to get a high-end rear wheel for almost half the cost of brand new!
Added 6 photos to my-buysell-items
Oct 23, 2017 at 16:02Oct 23, 2017
Oct 23, 2017 at 15:59Oct 23, 2017
Hello, I am selling my 2017 Yeti SB6. It is a size medium, X01 Turq Eagle build. I purchased this bike in April, and have ridden it 951 miles since purchasing the bike. Despite my best efforts to get it under control, the bike is just too big for me at 5'5" tall. It's best suited for someone probably 5'7->5'11 give or take. It's a great bike, incredibly stable in straight lines and carves hard corners. It would be better off with someone who fits the bike better! The bike has the following upgrades: Push ACS3 Coil Conversion (with yellow spring) to the fork, as well as a Wolf Tooth ReMote lever for the 125mm Fox Transfer post. Upgraded star ratchet for the DT swiss hub as well. Tires are Minion 2.6 Front and Minion 2.5 WT rear, with 80% of tread left. 200mm front SRAM centerline rotor, 180mm rear rotor. Would prefer to sell locally, but will ship within US. No trades. Please contact me for any questions. Bike is in perfect working order, minimal scratches from regular use.
Added 7 photos to 2017-Yeti-SB6-frame-with-custom-build
Jun 15, 2017 at 12:28Jun 15, 2017
Jun 15, 2017 at 10:23Jun 15, 2017
This is a brand new size small 2017 Yeti SB6 Turq frame, unridden and with new bearings. Fork is a 2015 Fox 36 RC2 that was fully rebuilt from Fox in April 2017 and is also unridden. Dropper post is a brand new, unused 2017 Fox Transfer w/125mm drop. Brakes are 2015 Guide RSC calipers mated to Guide RS levers. Drivetrain components are a mix of 2015 XTR shifter and derailleur, with E13 9-46 cassette and RaceFace Next SL cranks. Custom wheelset, Derby rims mated to I9 Torch hubs. Handlebars and stem are brand new RaceFace SixC and turbine parts, respectively. MSRP for the frame is $3500, so I feel my asking price of $5000 is very reasonable considering many of the parts are new, the used parts are high end, and the wheelset is custom. I do not want to trade for your VHS tapes, the used tires off of your Camaro, or novelty Scooby Doo ornaments. Thanks! Prefer local pickup if possible, otherwise will pack and ship (buyer's cost) by whatever method buyer prefers.
Posted in "Mammoth Bar Registration"
Apr 25, 2017 at 8:11Apr 25, 2017