daniel-beer

Bought new and then ran for around 8 months, but recently switched back to Hayes Dominion A4's. Includes front and rear levers, calipers, hoses, and mounting hardware. Upgraded HC3 levers. Caliper cover colours as shown, but Magura provides other colours: https://www.magurausa-shop.com/subgrouping.htm?cat=22509. Rotors not included. Used pads included; front pads are almost worn out, rear pads are fairly new. Will need to be bled but otherwise in excellent mechanical condition and no cosmetic damage. Also selling the following, and will throw in the bleed kit for free and a discount on the rest if purchased with the brake set. - Brand new front and rear rotors (https://www.pinkbike.com/buysell/3609741/ https://www.pinkbike.com/buysell/3609742/) - 3 sets of brand new pads (https://www.pinkbike.com/buysell/3609746/) - Epic Bleed Solutions bleed kit (https://www.pinkbike.com/buysell/3609750/)

Purchased from Epic Bleed Solutions: https://epicbleedsolutions.com/collections/magura/products/magura-bleed-kit. Includes all components, minus the gloves and only ~10mL of fluid left. Used for 4-5 bleeds. No modifications made to syringes, etc.

Brake pads for Magura MT5/MT7. 4 pads per set; $25 per set. Never mounted. Includes all mounting hardware.

Never mounted. 6 bolt configuration; includes all mounting hardware.

Never mounted. 6 bolt configuration; includes all mounting hardware.

Trunnion mount. Came stock on a new 2021 Forbidden Dreadnought; has a custom tune. Used for about 8 months (without any issues) before swapping for a coil shock. Excellent condition, and no cosmetic damage. Local pick-up or will ship at buyer's expense.

Lightweight Italian-crafted enduro saddle. Three-density memory foam padding and carbon fibre-reinforced nylon shell with titanium rails (80% titanium, 20% vanadium). Some light wear on the nose of the saddle as shown in pictures. Local pick-up or will ship at buyer's expense.

This is a very light do-it-all 29er carbon trail bike in excellent mechanical condition with high-end specs across the board. Purchased the Pro build at the end of 2019 and since then have upgraded it to include a SRAM X01 drivetrain, Hayes Dominion A4 brakes, and Vittoria tires. The entire build comes in at well under 30 lbs. Has only really been ridden for 1.5 seasons; the tires and brakes are pretty much brand new and the drivetrain is showing little wear. Some minor scratches to the paint with no damage to the carbon frame underneath. RockShox suspension front and rear with 140mm fork and 130mm rear shock, that can also be set to 115mm. Boost spacing front and rear. Local pickup preferred but I'll also be in Ottawa and Quebec throughout the summer so may be able to arrange dropping it somewhere else depending on interest. Asking $5000, or best offer. Frame: Intense Primer 29 SL Monocoque UD; carbon front and rear triangle, carbon top link, internal cable routing, integrated protector, titanium hardware, 115/130 mm travel Fork: RockShox Pike RCT3 29, Solo Air, 140mm Rear shock: RockShox Monarch RT3, 200x51mm Stem: Intense Recon Elite, 50mm length, 31.8mm Seatpost: Fox Transfer, 150mm drop Headset: Cane Creek 40 Handlebar: Intense Recon Carbon, 760mm wide, 31.8mm Grips: RevGrips Pro Series Brakes: Hayes Dominion A4, 203mm rotor front, 180mm rear Shifter: SRAM X01 Eagle Rear derailleur: SRAM X01 Eagle Cassette: SRAM XG-1295 Eagle 12-speed 10-50T Chain: SRAM GX Eagle Crankset: Truvativ Stylo Carbon, SRAM crank boots Chainring: Wolf Tooth oval, 32T Bottom bracket: SRAM Pressfit GXP BB92 Wheels: Mavic XA Light Front Tire: Vittoria Mazza, 2.4", trail graphene 2.0 compound, graphene sidewall Rear Tire: Vittoria Agarro, 2.35", trail graphene 2.0 compound, graphene sidewall Saddle: SDG Radar