Apr 29, 2019 at 12:14Apr 29, 2019
These forks were removed from a brand new bike and were never ridden. There are some little paint chips/scratches though, please see attached pictures of them. Maxle is included but no other accessories and no box. 29" Charger RCT3 damper 150mm of travel 46mm offset 15x100 axle Steerer is cut to 165mm and has star nut installed Buyer pays paypal fees and shipping.
Mar 19, 2019 at 11:49Mar 19, 2019
The shock have been used for one test ride, I just prefer Fox/coil so went with DHX2 instead. There is no mounting hardware or any other accessories included. Buyer pays pp fee and postage
Mar 11, 2019 at 9:08Mar 11, 2019
Hand build wheelset of 27.5" non boost wheels. The wheels are brand new and never been ridden. Some little storage marks on hubs, please see close up photos. The wheels are running true and smooth, spokes are tensioned to 125kgf (within 5% of tolerance). There are nipple washers on drive side of the rear wheel. Anti seize compound has been applied on nipple/spoke and nipple/rim contact points to prevent oxidation. Supplied with tubeless tape and valves. Full specs: Rims: Stan's No Tubes Arch MK3 32h, 27.5" Hubs: DT Swiss 350 non boost, 6 holes , front 100x15, rear 142x12 with XD drive freehub body and 18t ratchet Spokes: Sapim CX Ray, black Nipples: Sapim Polyax Alloy, black, 14mm Sapim washers on drive side of the rear wheel Stan's tubeless tape 44mm alloy black tubeless valves Weight: Front 764g, Rear 874g = 1638g, with tape and valves fitted it's 1660g Firm price, buyer pays PP fee and postage
Feb 10, 2019 at 10:42Feb 10, 2019
Brand new hand built front wheel, running true and smooth and tensioned to 125kgf across the spokes (within 5%). Rim: Hope Tech HD 26" Hub: Nukeproof Neutron 32h, 15x100 Spokes: DT Swiss competition Nipples: DT Swiss Pro Lock brass 12mm The price is firm and buyer pays paypal fee and postage, collection welcome.
Feb 10, 2019 at 10:37Feb 10, 2019
Brand new 27.5" wheel built from surplus parts. Every part of the wheel is new and never been used but the rim has some storage related scratches around the flange. Hub: Nukeproof Neutron 142x12, Shimano freehub body Rim: Stan's No tubes Flow Mk3, 32h Spokes: Sapim Race Nipples: Dt Swiss brass Stan's tubeless tape and black alu valve included. The price is firm and buyer pays paypal fee and postage, collection welcome.
dara85 danielsapp's article
Dec 15, 2018 at 11:56Dec 15, 2018
Field Test: Yeti SB130
@DrPete: I can't say if it was problem of the bike I tested or the whole "SB" range is effected but yes, I experienced this flex and didn't like it at all. Bikes I tested on demo weekend, Remedy, 5010, S150 and T130 (Whyte) all felt really solid but the SB130 felt like it was floating around. I've even checked tension of the spokes and tyre pressure as I couldn't believe what is happening but compare to others, it's not as solid as I'd like. I wonder how obvious it would be without direct comparison with other bikes though.
Nov 26, 2018 at 8:04Nov 26, 2018
I've decided to sell the bike on parts, starting with the frame. The bike is still complete so I will need few days to dismantle it and pack up. This is the ad of full bike: https://www.pinkbike.com/buysell/2475431/ This ad is for the frame and will also come with shock, headset, bottom bracket, rear axle, gear hanger and seat clamp (or any part you might be interested in). Buyer pays paypal fee and postage or collection welcome
Nov 15, 2018 at 23:56Nov 15, 2018
I have build this bike for myself in February this year thinking I really need 2 bikes but in reality this one was used handful of times and covered around 100 miles. Admittedly main problem is that it's a bit too small for me. I'm 6'2" but with long limbs and the Mega has a bit short reach to my liking. For obvious reasons, longer stem wouldn't be a solution. Please follow geometry chart below: https://geometrygeeks.bike/bike/nukeproof-mega-275-pro-2017/ As said the bike didn't see much of but I have taken the bike apart today, cleaned and lubricate everything so it's in new-like working order. Has some scratches, cable rubs and one paint chip. Nothing too serious or deep but they're there. I have tried to capture all on pictures but can't upload them all here so follow link below for full gallery: https://imgur.com/a/yBana76 Full specification: Frame: Nukeproof Mega 275, 160mm travel, 142x12 axle, size 20" (XL) Shocks: Rockshox Monarch Plus RC3 216x63 Forks: Rockshox Pike RC 160mm, 15x100 spacing Headset: Uberbike ceramic bearings Seatpost: Easton Havoc 125mm drop Saddle: Nukeproof Neutron Handlebars: Nukeproof Warhead 760mm, 25mm rise Grips: Uberbike Half Waffle Lock on Stem: Nukeproof Zero 35mm Brakes: Magura MT5 with 200mm rotor at front and 180mm at the back Bottom bracket/cranks: Raceface Race 32T NW chainring Cassette: Shimano XT 11-42T Shifter: Shimano XT 11 speed Derailleur: Shimano SLX with clutch (I prefer serviceable jockey wheels hence why not xt) Chain: SRAM PC1130 Pedals: Shimano Saint Hubs: DT Swiss 350, 18T Ratchet Spokes: Sapim Race with alu nipples Rims: Stans No Tubes Flow MK3 27.5" Tyres: Magic Mary SnakeSkin Addix 2.35 on front and Nobby Nic SnakeSkin 2.35 at the back Currently set with inner tubes but tubeless tape fitted so can run tubeless as well. just valves and sealant needed. Collection preferred or I can deliver within reasonable distance from Manchester for fuel cost. Delivery by courier also possible but will go fully insured so not cheap. For potential viewers I need to keep the bike assembled so few days will be needed to pack the bike and organise courier. If you want to view the bike, you're more than welcome but buy this item first (I'd like to know who you are): https://www.ebay.co.uk/itm/163312673358 Refund will be given of course.
Oct 14, 2018 at 11:43Oct 14, 2018
I have for sale 2 brand new Easton Arc 45 32h "+" size rims. As the name suggest the inner width is 45mm and are intended for 3.0" tyres. Weight is around 670g each. They have some little storage related scratches on them but mainly stickers are affected. I can also lace them up to full wheels, message me and we can work out your requirements. Will post at buyers expense.
Oct 14, 2018 at 7:00Oct 14, 2018
This frame comes from a bike which was used as a display bike but was never used. The frame comes with shock, bottom bracket, headset, seat clamp, rear axle. Little paint scratch on seat stay otherwise in perfect condition. Frame: L (19"), T700/ T800 Toray Carbon Fibre Frame With 6061-T6 Alloy Rear Triangle with Four-bar V-Link Rear Suspension, 155mm Travel 142x12 dropouts Shock: RockShox Monarch Plus RC3, External Rebound & 3 Position Compression Damping, 200mm x 57mm, ML tune Bottom Bracket: Wheels Manufacturing with Enduro bearings (RRP£59.99) - please see note below Headset: FSA Orbit 1.5 Zero Stack (NO.57), 1.1/8" – 1.5" Please note you can choose the bottom bracket either for 24mm spindle (Shimano) or 24/22mm for SRAM. The bottom bracket will be fitted prior shipping. Collection welcomed or delivery with Parcel Force available, buyer pay postage and paypal fee.