davidgriffinmasri

2018 Custom Specialized Sworks Enduro that was just fully serviced. I have a dh bike which I used much more frequently than this bike so it has less than 20 rides on it.. It has some scratches which are all shown in the photos, but they do not affect the performance. Don't be afraid to make an offer. Specs: DRIVETRAIN: CHAIN: SRAM XX1 Eagle, 12-speed w/ PowerLock BOTTOM BRACKET SRAM GXP, XR 73 CRANKSET SRAM XX1 Eagle, carbon, 24mm spindle, 52mm chainline, 30T chainring SHIFT LEVERS. SRAM XX1 Eagle, trigger, 12-speed CASSETTE SRAM X01 Eagle, 12-speed, 10-50t CHAINRINGS Steel, 30T REAR DERAILLEUR SRAM XX1 Eagle™, 12-speed SUSPENSION (not stock): FORK Rockshox Lyrik, 15x110mm thru-axle, 170mm of travel REAR SHOCK Öhlins Coil with ti-springs 500 lb coil WHEELS: FRONT HUB Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h REAR HUB Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h TUBELESS SPOKES DT Swiss Revolution RIMS Roval Traverse SL 27.5, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built (RECENTLY WARRANTIED FRONT RIM) FRONT TIRE Butcher, GRID casing, Gripton compound, 2Bliss Ready, 27.5 x 2.6" REAR TIRE. Butcher, GRID casing, Gripton compound, 2Bliss Ready, 27.5 x 2.6" COCKPIT: SADDLE Body Geometry Henge Expert, hollow Ti rails, 143mm SEATPOST. Command Post IRcc WU, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 34.9mm, 150mm of travel (BRAND NEW) STEM Syntace MegaForce 2, 6-degree, 31.8mm clamp HANDLEBARS Specialized DH, FACT carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 800mm, 31.8mm GRIPS DMR Brendog Grips BRAKES: FRONT BRAKE SRAM Code RSC, 4-piston caliper, hydraulic disc, metallic pads, 200mm rotor REAR BRAKE SRAM Code RSC, 4-piston caliper, hydraulic disc, metallic pads, 180mm rotor FRAMESET: SEAT BINDER Alloy, 38.6mm FRAME FACT IS-X 11m Carbon FSR 27.5 chassis w/ SWAT™ down tube storage, 170mm of travel, carbon seatstays, carbon 27.5 chainstays, tapered head tube, alloy link & adjustable shock extension, 148mm rear dropouts

I pulled this Ohlins fork off my 2018 S-works enduro because I was not quite heavy enough for it (you will want to be at least 120lbs to benefit from its many features). The fork has about 200 miles on it and is in great shape other than a few scratches on the (shown in pictures) but the scratches do not affect its performance. Just sent it back to Ohlins to get rebuilt and has not been ridden since. Öhlins RXF 36, 27.5, Twin-Tube design, air spring w/ adjustable 3rd chamber, adjustable high and low-speed compression, adjustable rebound, 15x110mm thru-axle, 46mm offset, 170mm of travel