deank92 pinkbikeaudience's article
Oct 25, 2018 at 1:59Oct 25, 2018
RockShox - Red Bull Rampage Fantasy Contest 2018
1, Jordie Lunn // CAN 2, Graham Agassiz // CAN 3, Brendan Fairclough // GBR
Added 13 photos to DT-Swiss-Wheels
Aug 1, 2017 at 12:34Aug 1, 2017
Added 1 photo
Aug 1, 2017 at 12:14Aug 1, 2017
Aug 1, 2017 at 12:11Aug 1, 2017
DT Swiss 1900 spline 27.5 (650B) wheelset. The wheels have been used on my Mondraker Dune for the past 2 years and they have been a good solid wheel. I am selling because I have bought a new set of DH wheels. They have the usual marks which can be expected of a wheel of this age the worst can be seen on the rear wheel on the pictures, the front wheel is in very good condition for its age and the back has slightly more marks on it. The back wheel has recently had free-hub and wheel bearings replaced along with two damaged spokes replaced, the work was all carried out at a local bike shop. If wanted I can supply the cassette but it is quite worn and probably won't last many more rides before it starts to slip. It is a Sram 11 speed 10-42. Specs are as below:- - 27.5" (650B) tubeless ready rims - Front - 15mm x 100mm bolt through hub - Rear - 15mm x 142mm bolt through hub Thanks for looking, I would prefer local pickup but would be happy to ship if needed.
Added 6 photos to Bars
Apr 17, 2016 at 10:27Apr 17, 2016
Apr 17, 2016 at 10:21Apr 17, 2016
Here for sale are my Pro Atherton Riser bars, specs are as follows: - 31.8mm - cut to 780mm - 5 degree upsweep - 9 degree backsweep - 20mm rise I bought the bars last year when I was looking for something wider than what I had. Put them on the bike cut them to 780mm but wasn't too keen on the rise they felt a little flat for my liking. Only ridden with them twice and as you can see they hardly have any marks on them at all, can barely see where the brakes, grips, shifter and dropper were clamped.
Added 7 photos to Fox-34s
Mar 8, 2016 at 4:57Mar 8, 2016
Mar 8, 2016 at 4:52Mar 8, 2016
Here I have for sale my Fox 34's, they have come off my Mondraker Dune XR and have been great forks since I bought the bike in October 2015. Only selling them on as I have bought some shiney new 36's. Below is the spec list. - Fox 34 Kashima coated - 160mm of travel - CTD control - Tapered steerer cut to 185mm - 15mm quick release through axel A couple of usual marks on the lower stantions which can be seen in the pictures and a very very small scratch on one upper stantion which I struggled to photograph and makes no difference to performance. Thanks for looking, Dean.