Block user


Added 5 photos to Buysell
Oct 7, 2018 at 5:17
Oct 7, 2018
Oct 7, 2018 at 5:02
Oct 7, 2018

Griffen Kompressor road frame & carbon fork 52cm small

$499 CAD
GRIFFEN KOMPRESSOR B4C ALLOY/CARBON COMPACT ROAD FRAME- SMALL 52cm Griffen was a small custom frame manufacturing making their own alloy B4C tubing and manufacturing frames. B4C is stiffer then standard alloy, increased vibration damping, carbon rear chain/seat stays. Our road team was sponsored by Griffen, this was a back up frame, built up, but not raced. Great started frame. Frame specifications Top Tube Horizontal: 52.5cm Head Tube: 12.7cm Seat Tube C-T: 48cm Chain Stay: 40.5cm Wheel base: 97.5cm Seat post size: 27.2 Including Shimano Bottom bracket, Cinelli carbon fork, headset and stem *Shipping to be calculated at time of purchase

Added 1 photo to Avid-Rotors
Oct 19, 2017 at 3:35
Oct 19, 2017
0 comments – Add comment
Oct 19, 2017 at 3:31
Oct 19, 2017

FS: Sram Avid Clean Sweep G2 160mm-Brand New

$60 CAD
SRAM AVID CLEAN SWEEP G2 160MM 6 BOLT ROTORS -BRAND NEW Product Description The Avid G2 Clean Sweep Rotor was designed to work with Juicy and BB7/5 brakes. It's a direct replacement for either of those. However, the only difference between it and the G3 Clean Sweep is a little more braking surface on the G2, making it a little heavier. What you get for that extra weight is a rotor that is quieter and able to handle more heat. For completely silent braking, Avid used to make the Solid Sweep rotor, which had no cutouts and was quite portly. The G2 isn't solid, but it's medium mass means your brakes are less likely to squeal. If loud brakes are not an issue for you, go with the lighter G3 Clean Sweep. All of the Clean Sweep rotors are very adept at clearing water and debris from the braking surface, hence the name. Set of 2: 160mm rotors inc. bolts

Added 2 photos to Griffen
Oct 18, 2017 at 4:50
Oct 18, 2017
Added 2 photos to Griffen
Oct 18, 2017 at 4:28
Oct 18, 2017
Added 3 photos to REAL-SPEED-WHEELSET
Sep 27, 2017 at 4:23
Sep 27, 2017
Sep 27, 2017 at 4:08
Sep 27, 2017


$949 CAD
REAL SPEED CARBON CLINCHER WHEELSET RS 4/5 UNTAMED PERFORMANCE There comes a time where you must pull out all the stops to achieve maximum performance Typically steering feedback in variable conditions with rim profiles in excess of 40mm can be unpredictable. Traditionally in order to maximize aerodynamics, the compensation was overall handling confidence. Such traditional high profile wheels have a non-linear steering response, resulting in erratic and uneasy handling in adverse conditions. The design shape of the Real Speed RS 4/5 rims is optimized to ensure even and predictable airflow around the circumference of the wheel. This results in a balanced accumulation of side air force as the angle of the crosswind changes. This amplifies the predictability of the wheel’s handling mannerisms, and eliminates dangerous steering over corrections. RS Sealed bearing hubs 25mm rim OD Front: 20 spoke Radial lacing Rear: 24 spoke 2x lacing 10/11Spd Less then a year old *Cassette/tires not included

Added 4 photos to Stans-Iron-Cross
Aug 17, 2017 at 3:25
Aug 17, 2017
Aug 16, 2017 at 10:37
Aug 16, 2017


$600 CAD
STAN'S NOTUBES IRON CROSS WHEELSET 700C Bring the unparalleled performance of tubeless wheels to cyclocross with the Stan's Notubes Iron Cross Comp Road Wheel. Crafted form a strong, yet lightweight 6061 aluminum alloy, this affordable, race-ready, and bombproof set of wheels rolls fast and takes on the rough and rowdy terrain ahead with a smile. Of course, this wheel uses Stan's trademark Bead Socket Technology (BST), which features low profile sidewalls to provide a better seat for the tire bead and allow for a ton of benefits compared to standard rims with higher sidewalls. When setup as tubeless, BST offers an incredible seal while allowing the tire to hold a greater volume of air than standard rims that place the bead 2-4mm below the edge. This allows the tire to maintain its full shape for a wider, more stable rolling platform than if the same tire were mounted on a standard rim. *These wheels can be run tubeless or using clincher tires and tubes. BST enables you to run up to 30% lower air pressure than on a standard clincher wheel for more stability, better handling, solid cornering, and better overall control. The lower sidewall substantially minimizes pinch flat risk by reducing the amount of material present for the tube to pinch against. And this translates to less time running to the pit with a flat and more time fighting for position out on the course. Then, faster engaging, CNC-machined Neo hubs with Durasync provide you with instantaneous response for getting up and over just about anything in your way. Strong, light, and fast wheel ready for gravel and cyclocross Aluminum delivers ideal strength-to-weight ratio BST maximizes tire volume for cornering and speed Neo hub with durasync provides quick engagement TECH SPECS Rim Material: 6061 aluminum alloy Wheel Size: 700c Tire Type: tubeless or clincher Rim Depth: 17.5mm Rim Width: [external] 23.2mm, [internal] 20mm Brake Compatibility: 6-bolt disc, centerlock Hubs: Neo with Durasync Front Axle: QR-100mm Rear Axle: QR-135mm Spokes: Sapim Race Black (2.0/1.8/2.0mm) Spoke Nipple: Sapim Secure Lock Alloy Black Spoke Count: 32-hole Shimano 10/11 SPD *NO cassette Will include Avid rotors Wheelset is less then a year old Only used on gravel bike

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2018. All rights reserved.
dv56 0.055630
Mobile Version of Website