esshoesrock

Giant Reign 2020 Medium, owned this bike since new. Spec as per Giant website https://www.giant-bicycles.com/md/reign-1-2020 Burgtec 38 Bryce bars Burgtec 35mm mk3 stem Burgtec Grips Burgtec front axle Burgtec crank bolt Burgtec headset spacers/top cap/bolt Front chain ring only been on a handfull of rides. Just had 6 lower linkage bearings, bottom headset bearing, pair of new Maxxis tyres, new gear cable, new dropper cable, pads front and back, bleed on both brakes, new chain. It's been fully stripped, cleaned and regreased. Not been use since its had the work done to it. Viewing at Uttoxeter Cycles any time the shops open. Can offer a warrenty through the shop. Shoows some signs of wear and tear but is a very honest bike and wants for nothing. Comes with spare rear rim and rear 180 mount and rotor to go with. Any questions please ask.

Reluctant sale, house purchase forces sale. Here for sale is my Giant reign 2016 2 in size medium. Owned this bike since new. Upgrades from standard are as follows; Burgtec stem Burgtec 40mm ridewide bars Burgtec mk4 penthouse flats Burgtec 34 tooth think and thin chain ring Front mech mounted chain guide Tubeless Maxxis high roller 2's Will include a pair of schwalbe hans dampf's Just been fully serviced including wheel bearings front and back. Chain has been regually replaced to prevent wear. Dropper post works as it should. Great bike loved every second of riding it and its never let me down. mechanically its 100% fine and has been well looked after. Can deliver at 50p per mile one way from cheadle, staffs.

Hello, here I have for sale my Giant glory 0 2012 size medium which i brought brand new from my local bike shop (I'm have the receipt somewhere). The factory spec can be found here. http://www.giant-bicycles.com/en-gb/bikes/model/glory.0/9338/49887/#specifications Since owning this bike i have made/changed/upgraded as follows. Hope tech 3 v4 brakes with braided hoses front and rear on 203 rotors (kept the standard avid rotors) Chris king headset Burgtech bars & stem Is now on Maxxis High roller 2's although the rear tyre has seen better days Comes with a 500lb & 450lb spring Spare brake pads A pair of cut down Maxxis wet screams Will included flat and drop crown This bike has been raced quite a few times and has been to the alps twice, but has been well looked after. The frame has had a full new bearing/bushing/axle kit direct of giant once in its life and has just had a full strip and rebuild and any bearings/bushing that seemed slightly worn have been replaced. The bike has just had a full strip and rebuild, new wheel bearings in the rear wheel, new gear cables and the bottom bracket has been changed not that long ago. This bike still rides great and don't let the usual uplift scars put you off. There is a small dent in the down tube not to far up from the bottom bracket have seen much worse on other Glorys and this is nothing to worry about. The shock and forks were both serviced by TF tuned last year (paper work in the photos) and the rear shock has had custom valve tuning as used by the Giant works team in 2012. The forks have just had a lowers service and new seals probably around 4/5 rides ago. I am a cytech cycle mechanic and this bike has always been maintained to a very high standard. The bike is priced to sell I'm not really too sure how much its worth so I'm open to reasonable offers. If you would like more pictures i can get them for me just message me and i'll get back to you soon as i can (I do work away sometimes though) I've tried to be as honest as I can with the sale of this bike any questions don't hesitate to ask. NO SWAPS. Note - this bike does NOT come with pedals.