jbess001

230x60 2019 Fox X2 Performance, w/ low speed compression and rebound and 2-position lever. The shock was fully rebuilt earlier this year and only has two rides on it since (I switched to a Marzocchi coil while the rebuild was being done and decided to stick with it). No scratches on the stanchion or air can.

Selling my 2019 YT Capra Comp. The frame is a 29er, but it is currently set up as a mullet. It has a Fox 36 Performance Elite fork with the Grip 2 damper and is currently running a Marzocchi bomber cr coil shock with a 500lb spring, 170mm travel front and rear. The bottom bracket, headset, and frame bearings were all replaced at the beginning of this season. The cranks (race face aeffect, 170mm), chainring (wolftooth camo, 34t), rotors and pads (metallic) are all nearly brand new, with only a couple rides on them. The cassette (Sunrace 11-46) and chain were put on about a month ago and still have lots of life in them. The XT derailleur was put on at the start of this season and only has cosmetic damage. The brakes are Sram Codes, with a brand new front caliper and recently flushed rear caliper. The rear wheel is a takeoff from a giant reign with only a few rides on it (its heavy, but its true and works like new), but I'm also including the original e13 hub with the bike, which is still in good shape and has a fairly new freehub. The rear tire has 6 rides on it and is a WTB judge with the tough casing and fast rolling compound. The front tire is a Maxxis DHF in DH casing w/maxxgrip with about two months of riding on it (showing some wear, but still has life left). The frame has cosmetic damage (scratches and paint chips), but no dents or cracks whatsoever. The fork lowers also have cosmetic damage but no structural damage or dents, and there are no scratches on the stanchions. The bike currently have a rigid seat post and quick release because the dropper post (e13) needs to be rebuilt (no longer staying fully extended under load). I am including the dropper post e13 rebuild kit with the bike, in addition to the rigid post and quick release. The bike needs a new sram matchmaker bolt to hold the dropper lever to the brake lever. The following are included with the bike at no extra cost: 1) a Fox Float X2 performance shock (230x60), recently had a full service/damper rebuild 2) an extra rear hub (e13) with at 27.5 dt swiss rim (out of true, needs new spokes) 3) two extra rims (both are Race Face arc offset, one is a brand new 27.5 and the other is a used but still good 29"), 4) nearly new 30t race face chainring 5) 2 extra springs for the marzocchi shock (450 and 550). 6) e13 dropper post and unopened rebuilt kit *The pedals shown in the picture are not included.* Please let me know if you have any questions.