jjjustin

Open UP Rapha Edition in size medium. Few paint chips highlighted, overall in great condition. Can take up to a 700x45mm tire. Was mainly on the road, and so the frame is in good shape. Most of the wear is just the paint, structurally fine. Will come with seatpost, stem, and Bontrager Isocore Carbon 42mm bars. $1500 shipped.

Picked this up last year. I am the third owner. The second owner hadn’t ridden it, nor built it. I put about 1200 miles on it last year. This one still has the ISP. has the Woodman setback topper. With the saddle, it’s about 72cm from the center of the BB to the top. I believe you can still add a couple mm of spacer underneath to raise or remove the ones i have under to lower. 54.5 effective TT with that sloping top tube be 54. Such a joy to ride, just have another bike that I am building up. Mix and match 11-speed Shimano Ultegra/105. Brakes, shifters, cassette, and RD are Ultegra. FD and Crank are 105. Crank is 170mm 50/34 chainrings. Cassette is 11-30 pushing it on the short cage derailleur. Had to get the hanger bent back a couple times. There are options for replacement hangers thankfully. The cross chaining is to blame. You’ll get new hoods since one is overstretched. One small ding on the top tube which i tried to picture. You’ll get a different wheel set than the HED Belgiums that are on there, but can be sold for the right price. Scratches from wear on the paint. The seat post area isn’t pretty from the seat post topper rubbing. The bars currently on there are not the ones pictured. The ones pictured are the ones you’ll be getting which are Bontrager Isocore pro vr-sf carbon 42cm. So you’ll need to re-tape. Let me know if there’s any questions if I missed anything. Testing the waters, not in a rush. $1600 complete + shipping

Going a different with the build. These have seen less than 500 miles. some scratches on the rear (pictured) but nothing compromising structurally. Gravel wheelset, 25mm internal width, tubeless ready, 24/24 spoke count. 30mm deep profile. N3W freehub. Comes with a Shimano/Sram freehub body compatible with the N3W hub Thru axles will be included. Tires, cassette, and rotors are not included.

Unloading inpulse purchases from my past. 2021 Cannondale Supersix Evo SE. This is the Rapha x Seeing Sound edition. 54cm frame that includes frame, fork, Hollowgram crankset with bottom bracket, and proprietary seatpost. Can accommodate 700x45s Had all intentions to build, but I didn't have time with work. And now I have a different build in mind. I am considering trades for the following with cash on your part: Enve bars 40cm Enve stem 110cm Campagnolo Ekar 13sp Crank with 170mm arms Campagnolo Centaur 10 speed group with hopefully 170mm cranks -- $3200 OBO. Price includes shipping and Paypal fees.

Ritchey Road Logic almost complete. Keeping the wheels for another bike. Needs a few things, but the bike runs. Effective top tube is 548mm top tube actual is 537mm seat tube c-t is 505mm stack is 549mm reach is 391mm Shimano 105 5700 10 speed drivetrain. Housing is little short, but I was waiting for 11-speed parts to changeover, but I found another frame. Haven't had a problem, but I like short housing. 170 crankarms with 50/34 chainrings Slightly used 11-25 Dura Ace cassette, but you'll need a new chain. Didn't want to give you a worn cassette and chain. Shifters aren't pretty, but they work perfectly. Deda RHM 01 Compact 40cm bars with 75 reach. You'll need a pair of pads for the rear caliper. If you want: Velocity A23 to Shimano 105 hubs different than the HED Belgiums that are pictured (keeping those for the new build) No saddle. I have a Fizik saddle I can also throw in for no additional cost.

Selling this project frame that I am no longer building since I found out my current bike is in good structural shape. Funding for a different type of bike. No dents or dings. Some tire rub in the chain stay but mostly cosmetic. Will come with a set of NOS decals. 54cm c-c seat tube 54.5cm c-c top tube 1in. headtube that’s 137mm in length.