Block user

Recent

Selling
Sep 1, 2019 at 8:18
Sep 1, 2019

Yeti SB150

$2800 USD
I have for sale is my 2019 Yeti SB150 Turq Series frame. The frame is in excellent condition. I have had 3M protective tape applied on this frame since day 1. I also applied an additional layer of Shelter Tape below the downtube protector for more protection from rock strikes. I will included the Cane Creek 110 Headset and SRAM DUB bottom bracket in this sale. This is a small rock chip on the non-driveside chainstay as seen the pic. There is also a scuff mark on the top tube just in front of the seat tube from where the bike blew over after leaning it against a tree. Both marks appear to be strictly cosmetic. Otherwise the frame is in excellent condition. I can also include a Fox Transfer Dropper Post and WolfTooth light action lever for an additional $300. Sorry the pictures are of the complete bike, I also have the bike listed as a complete build for $5800obo but will strip it down to the parts the buyer wants. Thanks for Looking!!

Added 17 photos to Buysell
Aug 25, 2019 at 18:41
Aug 25, 2019
Selling
Aug 25, 2019 at 18:37
Aug 25, 2019

Yeti SB150 X01 with upgrades

$5700 USD
I’m selling my 2019 SB150 X01 build. It’s been well taken care of and maintained. Frame was protected by 3M protective tape since day one. Recent fork service, maybe 100 miles on it since. Fresh Chain. Fresh bleed on the brakes. Wheelset is barely used I ran them for maybe a week while I had a set of DT Swiss 511s built early on for this rig. I did let a buddy borrow my rear wheel for a day and it suffered a small dent. The bead is straight and it performs as it should, mounts up easy and holds air. The GX cassette was left on this wheelset so it also has seen minimal mileage. It has a small rock chip one on the non-drive side inner chain stay and a small scuff on the front triangle just in front of the seat post where it blew over after I leaned it against a tree. The fork decals have a few scuff but nothing major. The stanchions are perfect and completely uneffected. The bike is stock aside from the following upgrades; 175mm Fox Factory Transfer dropper post(stock 150mm performance) Ergon SMC-Pro Saddle Saint Brakes Front and Rear (new pads up front and ~100 miles on the rear pads) X01 shifter (stock GX) Cane Creek 110 Headset (cane creek 40 stock) Enve M7 Bars (cut to 780mm) Industry Nine A35 50mm stem OneUp EDC tool in the steer tube. Wolftooth Light Action dropper lever Thanks for looking, it’ll make somebody a sweet rig or Enduro race bike. Asking $5700 Will also consider frame only sell for $2800

jnorris406 BigMtnEnduro's article
Aug 8, 2019 at 23:15
Aug 8, 2019
Race Report: Big Mountain Enduro Round 3 - Telluride, CO
Hey guys my wife was there and took pictures and you can can see if she got one of you and download them below. No charge- she just wanted to try it out to see if it’s something she would want to do in the future. https://adobe.ly/2GDoPOh
Added 6 photos to Buysell
Feb 19, 2019 at 20:17
Feb 19, 2019
Selling
Feb 19, 2019 at 20:14
Feb 19, 2019

DT Swiss EX471, DT Swiss 240, and Maxxis Tires

$500 USD
I’m selling my used for one season 27.5 DT Swiss wheelset. The 32 hole EX471 rims are laced to DT Swiss 240s boost hubs (15x110 Front 12x148 rear) with DT Swiss comp spokes. They were hand built at LBS Mojo Wheels. They are Centerlock brake mounts. It has the HG Shimano/SRAM free hub body which can easily be changed to an XD driver I ran these wheels with Cushcores (not included). Just some surface scratches. They run smooth and true. These are probable the most durable and stiff set of alloy rims out there. I’m selling because my new bike builds are 29ers and I no longer need these. Thanks for looking!

Added 12 photos to Buysell
Feb 8, 2019 at 13:24
Feb 8, 2019
Selling
Feb 8, 2019 at 13:19
Feb 8, 2019

SB6 Float X2 150mm dropper

$1800 USD
Up for sale is my beloved 2016 SB6. I built this bike from the frame up in Nov 2016. Since then I’ve put about 1500 epic miles on it. So it’s definitely used and shows normal wear. It is completely structural sound. There’s a couple of rock chips in the paint on the underside of the bike. I did have a rear derailleur gernade on me which caused the chain to break and slap the driveside seat stay. I have done my best to touch up the paint with Yetis touch up paint. I also applied All Mountain Style frame protection on the bike after that, which I removed before this sell. I figured not everybody likes orange accents. It didn’t get ridden a whole lot in 2018 as I had another bike I primarily rode. Okay enough about the history of the bike. Here’s what you get: 2016 SB6 Frame 2018 Fox Float X2 (Tuned by Yeti/Fox tech) 2018 150mm Fox Factory Transfer Dropper Post with 1X lever (Purchased Sept 18) maybe has 5 rides on it. Cane Creek 110 Headset Brand New Yeti WTB saddle (pulled off my SB150) I also left the cables in for the dropper post (which is set up and functioning) and the rear derailleur, to save the buyer some headache. I’m selling because it is so close to my new SB150, I don’t really have a good reason to keep it. Thanks for looking, I will accept reasonable offers. I will also consider separating some of these parts. Frame and Headset- $1500 Float X2 $300 Dropper Post and Lever $350

Added 12 photos to Buysell
Oct 9, 2018 at 14:58
Oct 9, 2018
Selling
Oct 9, 2018 at 14:58
Oct 9, 2018

SRAM Guide R Brakeset (New Levers and Pads)

$150 USD
SRAM Guide R brakeset off my wife’s Santa Cruz Bronson size medium (for hose sizing purposes). The levers were just replaced under warranty. The calipers may have 200-300 miles on them over the past two seasons she has ridden them. New pads Metallic in the rear and organic up front. Also included are 2 180mm Centerline Rotors. I had ordered another set of brakes for her bike while we waited on the warranty replacement and no longer need these. Thanks for looking! $150obo

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.025219
Mobile Version of Website