johannkuschke
- Member since Aug 4, 2006
- Male / 31
- Calgary , Alberta
- 15 Followers
- 4 Trailforks Points
Recent
Selling
May 25, 2020 at 10:30
May 25, 2020Norco Range A1
$3400 CADSelling my 2019 Norco Range A1 as I found myself a new ride for the 2020 season.
The bike is in good condition and has been well maintained throughout the season. The majority of the frame is covered in 3M taped to help protect the bike from scratches and dings.
The bike needs a new dropper post cable and some pedals but is otherwise ready to ride.
There is one paint gouge on the top tube from shuttling, but that is the only aesthetic damage to the bike.
Asking 3400.00 OBO
Specs:
FRAME
Norco Range, Aluminum, 150mm (29") | 160mm (27.5") Travel, Boost 12x148mm TA Dropouts
FORK
Fox 36 Performance, 170mm (29") | 180mm (27.5") Travel, Boost 15x110mm TA, Float Air Spring
REAR SHOCK
Fox Performance Float DPX2 with LV and EVOL
HEADSET
FSA No. 57 Zero Stack ZS44/56 , sealed cartridge bearing
HEADSET SPACER
3x10mm, 1x5mm, 1x2.5mm, Aluminum
DRIVETRAIN
FRONT DERAILLEUR
-
REAR DERAILLEUR
SRAM GX Eagle, 12 Speed
CASSETTE
SRAM NX Eagle PG-1230, 11-50T, 12 Speed
CHAIN
SRAM NX Eagle, 12 Speed
CRANKSET
Truvativ Decendent 6K DUB, 170mm (XS/S) | 175mm (M/L/XL), 30T
BOTTOM BRACKET
SRAM DUB BB, Threaded BSA 73mm
SHIFTER FRONT
-
SHIFTER REAR
SRAM NX Eagle, 12 Speed
COMPONENTS
GRIPS
VP, Lock-On
HANDLEBAR
Race Face Turbine R 35mm, 800mm, 20mm rise
STEM
Alloy 6061 40mm stem
SEAT POST
TranzX YSP12JL Stealth Dropper, 80mm (XS) | 100mm (S) | 125mm (M) | 150mm (L/XL) Travel, 31.6mm, 1x Lever
SEAT POST CLAMP
Norco Alloy Nutted Clamp
SADDLE
SDG Radar Mtn with CR-MO rails
FRONT BRAKE
SRAM Code R, 4 Piston Hydraulic Disc, SRAM CenterLine 200mm Rotor
REAR BRAKE
SRAM Code R, 4 Piston Hydraulic Disc, SRAM CenterLine 180mm Rotor
BRAKE LEVERS
SRAM Code R
WHEELS
FRONT HUB
Novatec 110x15 sealed bearing disc hub
REAR HUB
DT Swiss 370, Boost 12x148mm
SPOKES/NIPPLES
DT Competition stainless steel butted
RIMS
WTB ST i29 TCS 2.0, 32 Hole, 29mm Internal Width
FRONT TIRE
Maxxis Minion DHF, 2.5" WT, EXO/Dual Compound, Folding
REAR TIRE
Maxxis Minion DHR II, 2.4" WT, EXO/Dual Compound, Folding
FRONT AXLE
axle ( comes with fork)
REAR AXLE
Novatech X-12 system axle (Syntace compatible)
Selling
Sep 25, 2016 at 17:56
Sep 25, 2016Van R
$80 CADSelling an older 2010 Van R rear shock for $80 or best offer. The shock has seen quite a bit of use, but still functions nicely. The spring is 400.2.80, and the eye to eye length measures 8.5".
Selling
Sep 25, 2016 at 17:45
Sep 25, 2016Cove Peeler DH
$800 CADSelling my bike, "Frank the tank" because i've decided its finally time to save up and invest some serious money into a new ride. The bike is currently missing the derailleur and chain, but otherwise it's in good condition. The frame is a bit of a joke, as i've spray painted "Frank the Tank" on it. But i assure you, that if you were to replace the frame with something a bit more modern, that you could have a nicely functioning bike at a good cost. With the current frame, the bike weighs a ton, but it can handle some very aggressive terrain. The bike will take anything you throw at it, from the trails at Canada Olympic Park to the double black runs at Fernie. Although the frame is old, the majority of the components are in great shape.
The specs are as follows:
Frame: 07' Cove Peeler DH
Forks: 2011 Rockshox Boxxers
Rear Shock: 2012: Rockshox Vivid
Headset: Chris King
Handlebars: Raceface Atlas
Pedals: Raceface Affect
Hubs: Sunringle
Rims: Mavic
Crank: Hussefelt
Tires: Maxxis Minions
Selling
Sep 25, 2016 at 15:34
Sep 25, 201609' Rocky mountain flatline
$450 CADAsking $450 or best offer, for my 09' Rocky mountain flatline frame. The frame also comes with a Chris King headset, Rock Shock Totem forks and a Truvativ stem. The linkage is blown, so the frame would need a new linkage kit (should only cost about $50), and there are also signs of wear, where the linkage has been coming into contact/rubbing (as shown in the photos). But with a stiff enough rear shock, i feel that the problem can easily be eliminated. The frame is a burly, reliable downhill machine and its treated me well, but i just don't have the time to fix it up and ride it anymore.
Selling
Oct 28, 2015 at 13:36
Oct 28, 2015Scott Voltage Fr20 Frame and Crank - cracked*
$50 CADI discovered a rather large crack on the frame of my Scott Voltage Fr20, so id like to part ways with the frame. Hopefully you, or someone you know can aluminium weld the frame and give the bike a few more seasons of life. The bike is a great entry level freeride bike that would make a great father/son project. The frame still has the Truvativ Hussefelt crank on it as well.
Im asking $50 for the frame and Crank, but i'm open to any offers.
Message me for any further details!
12,634 views