john321

Need a front derailleur for flat bar road bike running shimano 9 speed with 30/39/50 front chainrings. From what I can tell, to use trigger shifters you are limited to the FD-R443 or FD-R453.

Looking for an LX rear hub to match the front one I already have. Need it to be 32 hole. Picture is the hub I'm ideally looking for. Will consider other similar shimano non-disc hubs. I will cover the shipping cost.

Race Face Prodigy stem. 110mm length, 1-1/8" steerer, 25.4mm clamp. $10 plus shipping.

50mm length, 1-1/8" steerer, 31.8 clamp.$15 plus shipping.

Two wheels for sale with tires. Front wheel: Mavic EX325 laced to 110m x 20mm hub, no axle included. Has a 2.7" Maxxis mobster installed (measures closer to 2.5" actual width on the rim). Rear wheel: Sun S-Type laced to 135mm Shimano FH-M475 with a 9mm bolt-on axle. Can include the original QR axle with sale. Has a 2.5" Maxxis high roller installed (measures closer to 2.35" on the rim). This is an older wheelset that I had built up for a bike I didn't end up using very much. As a result, there are basically good as new - straight and true. Tires have 95% tread left. Wheels were hand-built by a local shop back in either 2006 or 2007. I'll consider selling any of these items separately - front wheel, rear wheel, tires. Make me a reasonable offer if that's of interest to you. Shipping costs will be on the buyer.

Thomson Elite seatpost, 26.6 x 330.

Thomson Elite seatpost, 26.8 x 410. Some scratches as you can see in the photos, overall in good shape.

Lightly used set of shimano saint M800 cranks. Shimano plastic bash guard, 32T, 22T rings. Very little use on these, a few scratches. You will need one of these to install: http://www.chainreactioncycles.com/ca/en/shimano-fc-m582-crank-arm-fixing-bolt/rp-prod32877

Balfa minuteman frame for sale. The frame was re-painted by Toxik Design Labs back in about 2006, and it has seen little to no use since then. It was painted in a colour that very closely matches the original, and a new set of decals was applied. The frame is in great shape, with a few scuffs here and there mostly from having other bikes leaned against it over the last 10 years. It has a race face diabolus headset installed which will be included. Own a piece of Canadian mtb history! Will be a sad to see this go, hopefully someone out there would actually ride it, otherwise it'll just keep hanging on the wall. Check out this site for more details: http://www.balfa.wooyek.pl/balfa-minuteman.html