kennybike

Shock has around 60 hours on it. Not a nick or scratch on it, perfect and 100% operational. 8.5x2.5 off of a 2013 nomad. BTW- these are the tune items listed on the shock. I haven't a clue what they mean, so I hope you do. Rebound - red L Velocity - blue L BV - 175 Local pickup is welcome.

Tapered head tube is cut at 7.8 inches or 198mm. This was fully rebuilt by Fox in September 2013, new stanchions, bushings, and 2014 internals. Serviced through Laguna Beach Cyclery, receipt is available on request. I have right at 30 hours on this build. The stanchions are 100% immaculate. There are your general scuffs on the lowers decals. There is a pretty nasty looking rub on the rear left lower that I have shown in the close up. That was from a pedal rubbing against it on a bike rack, purely cosmetic. Other than that the fork is sound and completely operational. This is welcome to be picked up in SoCal, I'm in Laguna Niguel. I have references on the board as well.

My baby has to go, let's list the parts. I just dropped $450 rebuilding the suspension and putting a new chain and cassette on with a tune up. 2009 Yeti 575 in medium with silver anodized finish. Frame is in great shape, barely a nick on it. Full carbon swingarm. Suspension is freshly built with the fork going direct to Fox and fitted with the new FIT cartridge. Only one ride to make sure it worked. Shock rebuilt too. Fox Talas 140 RLC (fresh fox rebuild) Fox RP23 (fresh seals) Full XT drivetrain with XTR rear derailleur that has not a scratch on it (see pics) 9 speed Elixir R hydraulics with 180/160 F/R Easton Carbon Monkey riser 685mm Easton havens 70mm stem Chris King headset Race Face Deus XC crank NEW chain NEW cassette Mavic Crossmax ST (tubeless) front is perfect. Rear has one ding in the rim but the wheel is true and it rolls and holds air fine. This thing is in great shape and come to think of it the only thing it needs is some new rear pads, oh, and a rider. I'll chip in the pads.