Ride Log March 7, 2011

Rode SFU. Nice and Dry.
Run #1: Gear Jammer - Lower Snake 1.7km
Run #2: Poplar to Nicoles 1.3 km

Loose Rear Hub. Stripped thread drive side hub axle.

Total Ride: 38.0 kmIntense M9-FRO

FRAMESIZE : Small, 9.5" travel, middle rate, middle G3
BIKE WEIGHT: 39.6 Lbs
BRAKES: Avid Elixir Carbon Front and Rear, 203mm front and rear
COGSET: SRAM X.0 with 9 speed 12-26T
CRANKS and BB: Race Face Atlas 165mm 83mm 833g
DERAILLUER: SRAM X.0 203g
FORK: 2011 Fox 40
HANDLEBAR: Deity Dirty 30 286g
HUBS: Easton Havoc DH 20mm front / 150mm x 12mm rear 1050g front / 1100g rearwheel
GRIPS: ODI Lock-On
GUIDE: E13 LG1+ 184g
PEDAL: Crank Bros Mallet 535g
RIMS: Easton Havoc DH 28h
RING: 36T Envy 51g + bolts 30g
SEAT: San Marco Ponza 204g
SEATPOST: Thomson Elite 31.6 mm 224g
SHIFTER: SRAM X.0 112.5g
SHOCK: Fox DHX RC4 with 300 Lbs spring
STEM: Point 1 Racing Direct Mount LE Ti 112.4g
TIRES: Maxxi Minion 3C Front and Rear 1050g
TUBES: Standard


Front tire: 25 psi
Rear tire: 28 psi

2011 FOX DHX RC4:
9.5" x 3.00" Stroke
SPRING: 300 Lbs Ti
PRELOAD: 2 turn (To achieve 34% shock sag)
REBOUND: 8 clicks
HSC: 9 clicks
LSC: 2 turns
BOOST PRESSURE: 150psi
BOOST SETTING: 0 TURN

2011 FOX 40RC2:
Travel: 8" setting, purple spring
Oil: Stock
High Speed Compression: 8 Clicks from full out
Low Speed Compression: 10 Clicks from full out
Rebound: 3 clicks from Full out
Preload: 4 clicks from full out to achieve 2" sag.

Headangle: 64.00 degrees
BB Height: 13.75"
Chainstay length: 17.375"
Fore Seat to Handlebar: 16.50
Seatpost with Seat Angle: -12 degrees
Wheelbase: 46.25"
Front Axle to Handlebar clamppoint: 30.50"
BB to Topseat: 23.00"