kidmcgavin

Fox Float DPS EVOL Performance from a 2018 Rocky Mountain Altitude. Shock was factory rebuilt and hasn't been used since Like new condition Would trade for a RockShox Monarch RT3 , needed for for older stumpjumper.

2012 Specialized Stumpjumper FSR Comp with lots of upgrades Currently located in Nanaimo, will be home in Kelowna in early June then out to Jasper shortly after. I would be willing to drop it off somewhere along the way. Most recently a brand new drive train installed last week: Shimano XT derailleur and shifter Shimano 42-11T Cassette Shimano XT crank Shimano 30T chainring Shimano Chain Praxis BB Last spring: Shimano XT M800 front and rear brakes Shimano 180mm Ice tech rotors Front tire Maxxis High roller Rear tire Maxxis Minion DHF 2 years ago: Giant dropper post, ( needs to be lubricated regularly ) Raceface Atlas handlebars Fork serviced last summer working perfect. Considering the bike is 8 years old it has a few things that should be done. Main issue is that the rear suspension needs a rebuild, it's not performing like it used to. Rear wheel has two spokes that are broken which causes the wheel to be off true, doesn't cause brake pad rub though. Overall the bike has lots of scratches and dings to the paint but no cracks or anything that compromises the frame. If you felt inclined you could remove the brakes and new drive train and likely sell it for $1000 easily considering it's brand new.

For sale is my K2 Panoramic splitboard with Karakoram split 30 bindings and G3 skins. Board is a 172cm and comes with all the hardware to install bindings on another board. Brand new set of screws for the mounting plates as well. What you're really buying here are the bindings. The Karakoram split 30 bindings are an excellent design and a super solid binding. They are in 100% working shape. New these bindings retail for ~$600 As you can see from the pictures the board in this set up is fairly well used. The board had a couple of deep scratches that have been repaired. Edges are intact but have some light rusting which would disappear with a good edge sharpening. The nose of the board had a bit of moisture get in and began to expand. It has since been dried and epoxied back together. Comes with a set of High friction G3 skins that are in good shape. Willing to ship anywhere if you pay for that cost. Contact me for more pictures or with any questions.