mennell02

Stanton Slackline finished in British Racing Green Gen 2 18inch frame constructed from Reynolds 853 steel Rockshox Pike Debonair 150mm fork with custom decals Rockshox Reverb post - 150mm drop Hope Tech Enduro rims on Pro 4 hubs Hope Tech 3 E4 brakes Hope Cranks Hope seat collar Burgtec 42.5mm stem Burgtec bars Burgtec grips SRAM XO 11 speed drivetrain Hutchinson tyres Rimpact tyre inserts The bike is built to a high specification and is in extremely good condition with no scratches. The frame has been taped up in all of the vulnerable areas. I would consider a swap for a similar spec’d 29er hard tail Pedals not included Collection from Doncaster

Commencal Ramones 14 in excellent condition. The only things worth noting are: * Slight cable rub to the head tube * front brake cable is frayed at the end Collection from Doncaster

POC VPD 2.0 elbow pads Excellent condition Can post for extra Collection from Doncaster preferred

POC VPD 2.0 knee pads Size Large Excellent Condition - only worn a few times Can post for extra Collection from Doncaster preferred

2021 Santa Cruz Carbon Bars 800mm wide 20mm rise Only 4 rides old, I have swapped them for a 30mm rise. There is a scratch on the right hand side from removing the brake, this will be covered by the grip so won’t be seen when fitted. Collection from Doncaster preferred, but can post for £5. Cheers Rich

***OFFERS/SWAPS*** Orange Five - Size Large Extremely well looked after and this shows in the overall condition Very high spec build, every part/component has been upgraded since buying the bike I’m looking for a frame or rolling chassis swap, must be a size medium or large trail bike, 27.5 or 29er considered Bike build consists of: Cane Creek InLine Coil shock ( 550 and 500lb springs) Fox 36 Factory fork FIT4 - SKF low friction seals Hope Tech 3 E4 brakes Hope headset Hope stem (35x35mm) Hope BB Burgtec Bars (cut to 780mm) Burgtec grips Burgtec The Cloud saddle Fox Transition Factory seatpost - Practically new PNW dropper lever Stans Flow mk3 on Hope Pro 4 hubs SRAM AXS X01 drivetrain SRAM X01 carbon cranks Maxxis DHF and DHR tyres Rimpact inserts This bike needs nothing - bearings recently replaced and there is another set included in the sale. Peddles not included. I’m open to offers for the build, however I don’t think a price point that I’m happy with would be achieved and that’s why I’m potentially looking at a frame swap/sale over selling the full bike. I can't afford for the price of the drivetrain to be dismissed, this wireless setup was £1900!! Bank transfer on collection

2017 Orange Five finished in charcoal grey Excellent condition Cane Creek InLine Coil - just serviced at Slick and Slide Suspension - 500lb spring also included Hope headset Frame has been taped in the most vulnerable areas, no chain slap on swingarm etc. I would possibly swap for another frame or even a rolling 29er chassis (frame/fork/wheels) If you’re interested in knowing more about the full build then please ask. It’s built to an extremely high spec with SRAM AXS X01 drivetrain. Collection preferred from Doncaster, however I do travel quite a bit with work so could possibly meet up.

For sale is my Sons Bell Sanction helmet as he’s grown out of it. It’s had very little use and is in excellent condition, just one small scratch on the chin guard (see picture). Never crashed in or took any sort of impact. Size small. Comes in original box. Collection from Doncaster preferred, but can post for £10.