Xpedo GFX Pedals - Review

Aug 8, 2016 at 11:24
by Mike Kazimer  
Xpedo GFX


“Flat pedals win medals” may be how the saying goes, but a quick scan of the World Cup DH results sheet shows that it's usually the riders who are clipping in that end up on top of the podium. For that reason, over the last few seasons several more DH-oriented clipless pedal options have surfaced, including Xpedo's new GFX pedal.

Xpedo GFX Details
• 4 adjustable pins per side
• Aluminum body, chromoly spindle
• Internals: 3 cartridge bearings
• Weight: 469 grams
• MSRP: $129 USD
www.xpedo.com

The GFX uses a wide aluminum body that surrounds an SPD compatible clip-in mechanism. That mechanism is spring-loaded, which positions the front portion higher than the rest of the pedal in order to make it easier to clip in as quickly as possible. Once you're in, Xpedo's XPT cleats provide 6-degreees of side to side float.

Four pins on each side of the aluminum body provide additional traction, and their height can be changed to adjust the level of grip. The body itself is shaped similarly to a set of modern, low profile flat pedals, and measures only 18mm at the center, with a 105mm length and 90mm width. The GFX pedals spin on a chromoly spindle and three cartridge bearings, along with the two bushings that allow the center portion to rotate when pressure is applied to it.

On my scale the pedals checked in at 469 grams, which is 84 grams heavier than Xpedo's claimed weight, but that number is still very competitive for this style of pedal. Color options include blue, orange, red, black, and a special edition 'oil slick' model. MSRP: $129 USD.


Xpedo GFX
The aluminum body is nice and thin, measuring only 18mm at the center.
Xpedo GFX
Xpedo's own XPT cleats are included, but the pedals are also SPD compatible.

Xpedo GFX
A chromoly spindle and three cartridge bearings keep everything spinning smoothly.
Xpedo GFX
A 9mm socket and a few allen keys is all it takes to completely disassemble the pedals.



On the Trail

The GFX pedals use a Shimano-style system to hold your feet in place, and it's similar enough that Shimano's own cleats will work without any issues. I tried both the supplied Xpedo XPT cleats and a set of Shimano SH51 cleats and couldn't detect any noticeable difference when entering or exiting the pedals. The amount of available spring tension is similar to what you'd find with a set of Shimano pedals as well; with the tension indicator right in the middle I didn't have any unwanted releases or difficulty getting in or out.

I regularly switch back and forth between clipless and flat pedals, and I found that the wider body made it easier to get re-accustomed to clipping in. The platform's generous dimensions makes it an easy target to hit, and I never had any trouble getting back in after taking a foot out to slide around a corner or when I dabbed in an awkward section of trail. That extra width also helps provide more support underfoot, which can come in handy for riders who don't want to wear ultra-stiff clipless compatible shoes.

Getting in and out is isn't a problem, so how's the durability? So far, so good, even after some extremely solid encounters with rocks and the ground. The pedals are still spinning smoothly, without even a hint of vertical play. The only nitpick I have is that I'd like to see a better seal on the inboard portion of the pedal; there's one small o-ring there right now, and in really wet conditions water and mud can still make their way past it, potentially shortening the lifespan of the bearings.



Pinkbike's Take
bigquotesXpedo hit the mark with the GFX, creating a reliable option for riders looking for a wider platformed clipless pedal, one that works for everything from DH racing to everyday trail riding. - Mike Kazimer



Visit the feature gallery for high resolution and additional images





67 Comments

  • 90 2
 But do they climb like trail pedals and when you point them downhill they descend like true downhill pedals?
  • 22 0
 really thought it was going to be a grunt going up but once we got going we realized this was an all around trail shredder pedal and don't even get me started about how great they were when pointed downhill!
  • 27 0
 Do you have to point your feet downward to activate the downhill mode? Or are there wires?
  • 12 1
 @chillrider199: internally routed electronic cable that accuayes the wumbo switch
  • 9 0
 Are they compatible with my DH specific valve caps?
  • 7 0
 @DaySleep3r: unfortunately not, you'll have to switch them out for a chromoly steel valve cap with a shrader valve due to the new thread pitch standard...
  • 50 1
 "Hey guys, what should we call these pedals?" "I don't know, but they should have the word Pedo in them" "Genius"
  • 49 0
 Does the X stand for "Ex", as in former pedo, or does the X used like the X in Xmen, like a super mutant pedo? My purchase likely hangs on the answer here...

All kidding aside, had a set of the platforms in the shop last week, seemed really light, platform was medium in size. I guess I was setting the bar pretty low, but I was pleasantly surprised. Any users that can speak to their durability?
  • 3 12
flag paulsek (Aug 23, 2016 at 23:02) (Below Threshold)
 Ha, I get it "farts"...
  • 3 0
 These pedals are Xtra sassy!!
  • 3 0
 @mikealive: I broke mine pretty quick, but I'm a big guy and its really rocky in my zone. Pins are not very deep and got torn out of the body really quickly and some can't thread in anymore. Not a big deal there.

I broke the clip in mechanism on one side of the left pedal and the bracket that holds the clip mechanism in line with the platform have broken on 3 of the four sides. Looking at the first picture in this article, its the bend piece of metal on the outside of the pedal and just rear of the axle, attached by two screws. For me this piece broke off where it attaches to the screws so the clip body can move more in relation to the platform.

I've ridden them probably... 15 rides? I like the feel and clip/cleat, but the durability hasn't been good for me and my trails.
  • 1 0
 @Rainmaker22: Same here, except it's not really rocky where I ride.
In one enduro season, 5 pins out of a total of 16 pins are bent and can no longer be unscrewed, 2 of the fragile little pieces of metal that hold the body clip return springs have broken, and given the ease with which they broke, I preferred to drill the platform and replace them with zip ties! (ghetto-tech repair!)
The bearings of one of the two pedals are still running well, the other one is starting to show signs of fatigue and slow down the rotation...
  • 17 1
 84 grams heavier? 84?! I don't understand. How can there be that much of a discrepancy?
  • 28 3
 New here?
  • 7 0
 I always assume brands that lie about weight are trying to capture the market of people who don't research their purchases. A product for chumps, if you will.
  • 13 0
 Far from new here. I'm just shocked at the brazenness of the lie; that's over 20%. I'm used to companies choosing somewhat plausible discrepancies.
  • 5 0
 @Bluefire: Same with how automotive industry here in Europe lies about average fuel consumption in their cars. The discrepancies go over 40% in some cases.
  • 25 1
 They must of given the weight without pedals. Oh wait...
  • 1 1
 @drfunsocks: #winnerwinnerchickendinner!
  • 2 0
 @kopaczus: And 40% isn't even close with plug-in hybrids...
  • 8 0
 I have xpedo flats. total shin shredders. but grippy, light, cheap and so far haven't broken!
  • 8 1
 Not one photo with shoe clipped in to see how the platform interacts with the sole of the shoe.
  • 1 0
 @David9180, I added a few more images to the gallery: www.pinkbike.com/u/mikekazimer/album/XPedo.

Keep in mind that the clip-in mechanism rotates, so even though the front of the shoe doesn't contact the pins in the photos, if you shifted your weigh those pins would be engaged.
  • 8 1
 Are they OK for enduroing? I wouldn't want to ride inappropriate pedals.
  • 2 0
 Anyone tried these and can comment on the pins? Do they do a decent job of offering a little grip against the sole of your shoe while still allowing a smooth release? I like my XT trails but the feeling of the rotational float is a little annoying with the various shoes I've tried. If the pins can offer just a little friction but still allow a safe release then these might be a winner.

Wasn't Shimano meant to be coming out with a new caged pedal soon too?
  • 5 0
 Shimano's seem to have disappeared, even the Atherton's, who were testing them, are now back on Mallets...
  • 1 0
 The pins are fairly small, compared to pins on normal platform pedals, but they do not hinder unclipping when unweighted, but with weight on the pedal they offer enough grip to keep the shoe well planted on the pedal. This however depends quite a lot on the shoe you use. If you use the kind of XC shoes with hard, uneven plastic bottom, the pins and pedals obviously don't work too well. If you have fairly flat bottomed shoes, like Specialized 2FO, Shimano AM45 or similar, these do indeed work wery well.
  • 2 0
 @Vertti83: Good to know, thanks. Might try to see them in the flesh sometime. My XTs are still going strong though.
  • 3 2
 "...usually the riders who are clipping in that end up on top of the podium. For that reason, over the last few seasons several more DH-oriented clipless pedal options have surfaced...."

Can we please stop calling these clipless pedals? I know the history of it but seriously, is there anyone who actually thinks of old school clips when you says clips? To an outsider the nomenclature must seem ridiculous.
  • 16 0
 Outsiders are not cyclists so their opinion on cycling issues and nomenclature is irrelevant. Also the pyramid of humanity says they are lesser people so who cares what they think?
  • 1 0
 I have ridden a few Xpedo clipless pedals in the past and loved them... My only issue is the just don't hold up to the same abuse that shimanos can. Riding in the north shore you need a pedal that can handle getting smacked by rocks on a consistent basis. The Xpedo clipless system just hasn't been able to take the same beating. That being said... They make good stuff!
  • 1 0
 I have been seriously looking at the GFX - so thanks for the review. Just one question @mikekazimer - the xpedo web site says the pedals have a wider Q-factor. How to they compare in this regard to wide pedals such as Mallets?
  • 1 0
 These lasted only 5 months through a dry Aussie summer before getting gritty so the inboard seal vulnerability observation is spot on. Went to strip them down to replace bearings and found one of the spindles was cross threaded at factory assembly, so new spindle needed. Emails to Xpedo Taiwan and US got no response and the store that I bought them from got the same from these shysters.
  • 4 0
 Can anyone recommend what is the best shoe to use with this type of pedal?
  • 32 0
 Jandals, mate.
  • 5 0
 He's right ^
The shimano SD66 spd jandals are the perfect match
  • 1 0
 Cheap tri-pluggers for sure.
  • 1 0
 Specialized 2FO, or some similar which has flat base. XC shoes doesnt work that well, as one might expect... I've had these with 2FO's for couple of months now, works really well...
  • 3 0
 Flip flops
  • 5 0
 Something in a bit of a wedge shape, maybe some classic black pumps?
  • 2 0
 @alesar, along with the aforementioned jandals, I had good luck with Shimano's AM9 Shoes. Like @Vertti 83 said, a shoe with a flat sole works best.
  • 1 0
 @freerabbit: What's that?
  • 1 0
 Thanks for the advice!
  • 5 2
 Shimano XT trail pedals are 64 bucks from CRC, I think I'll stick with those.
  • 4 1
 You miss the point, these pedals (and their role models) are all about the large platform. The Shimano pedals cage is nothing but protection for the cleat system: Nothing to stand on, no grip nor pins.
  • 1 3
 @kerberos: some people need all the support they can get I guess, I'm not one of those people.
  • 2 0
 Or pd-m530 even cheaper, just a tiny bit heavier. Running them on 2 of my bikes, DH and trail.
  • 1 0
 @DJR9000: also a good option for a lot less $.
  • 2 0
 Don't get these if you want more than 6 months out of them, especially if you need a new spindle - not available going by zero response from Xpedo
  • 2 0
 Hallelujah!... 'it's similar enough that Shimano's own cleats will work without any issues'
  • 3 0
 You really need to take the pedals apart? Move onto Times, mate.
  • 1 0
 VX Adventure pedals. SPD compatible, 90mm x 90mm "platform," 470g, $30 shipped. Done and done.
  • 1 0
 Here is one pic with Giro Chamber shoes. ep1.pinkbike.org/p5pb13862487/p5pb13862487.jpg
  • 1 0
 Will them make fire if hit a rock?
  • 1 0
 Depends how dry it is Inyo forests
Below threshold threads are hidden

Post a Comment



You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.028685
Mobile Version of Website