natedogg34

Chris King Sotto Voce black NoThreadset, I believe this is a Devolution, I was using it on my V10.4 (1.5-inch headtube) with a 1-1/8" straight steerer. Great condition, one cup has slight scuffs. $70 Cane Creek 110 headset, ZS44/EC49, great shape, came out of my Nomad 3. $50 Twenty6 F1 direct mount stem, black, 31.8 clamp, has some dings/scuff. $75 Thomson 50mm stem, 1-1/8", 31.8 clamp (have to double check that) $60 Easton EA50 low riser bar, rise is about 1.5", bars are about 27" wide, 25.4mm clamp $15 Race Face Low Rise bar, rise is about 1.5", bars are about 25" wide, 25.4mmm clamp $15 Shipping not included, I'll cover Paypal fee. Will consider trade/partial trades for a Santa Cruz carbon riser. Twenty Six 26 Thompson Raceface

Rock Shox Totem 180mm. It has Mission Control damping with the lockout feature removed to allow more oil flow. The steerer is straight and is 1-1/8" by 6-11/16" long. I believe the brake mounts are 74 post. Service Specs 4/7/12 Mission Control Oil: 7.5wt Golden Spectro, 140 mL Lower Bath Oil: 22 mL of 15 wt per leg. Seals: Slick Honey packed and cleaned. LS setting: 8 clicks in from full out (of 12 clicks) HS setting: 2 turns in from full out (of four and one quarter turns) Spring: Blue (medium-firm) in the fork. Other springs available. Fork's been ridden about four times since the last service. https://www.pinkbike.com/news/2007-RockShox-Totem-Coil.html

Brand new in the bag Black Diamond Zone Shell women's ski jacket. We bought online this for my wife and it ended up being too big (she's normally a medium, but we loved the jacket and it had great reviews, so we went for it anyway). It's called a shell, but it's insulated with Primaloft, and also has a breathable waterproof Gore-Tex shell. It normally retails at $649. From the web: "Skiing Magazine ranked a plethora of ski jackets this year but their highest ranking women's jacket went to the Black Diamond Zone Jacket." Fit: Regular Length: Hip-length Material: Nylon Insulation: Synthetic Seam Sealing: Fully Taped Powder Skirt: Yes Hood Type: Fixed Hood Warranty: Limited Lifetime "What Skiing Magazine had to say about the 2016 Black Diamond Zone Jacket: Designed for lift riding on cold days, the Zone takes advantage of PrimaLoft Silver insulation, which is high-loft and very warm yet still compressible. Extended pit zips let you cool down as needed, while a stowable powder skirt offers options in the deep. The pants boast BD's popular Pieps pocket for quick-access beacon storage, 
a standard feature on most of their pants."

I've got a few Yakima racks I'd like to get rid of: Yakima wheel forks. I have 3 of these, 1 brand new in box, and 2 used in great condition. $10 each Yakima Steelhead bike trays. I have 3 that are brand new in box. One is missing a roundbar mount and a nut. $50 each or best offer. SOLD Rocky Mounts bike tray. Junk, for parts only. Tray appears to be fine. free Yakima Qtowers that came off my old 2001 Toyota Tacoma Doublecab (comes with 117 Qclips). Has locks and keys. Used. $75 (load bars in pic are sold) Open to possible trades, I'm specifically looking for 26" carbon wheels 20/150mm

Rock Shox Monarch Plus RC3 DebonAir M/L three-position compression 8.5 x 2.5/216 x 63 Bought it on a Nomad, guy said it was brand new and it looked it. I’ve probably only put 20 rides on it. Mounting hardware for Nomad 3 included. $140 or best offer Open to possible trades, I'm specifically looking for: Carbon 26” DH wheels 20/150 Chris King Inset4

I'm the first and only owner of this bike--I bought it as a frame around 2005 and built it up from scratch. I hate to sell it, but I've moved on to other bikes and this is mostly sitting. It's well used, and has the scratches to prove it, but there's nothing structurally wrong. The lower linkage was replaced a few years ago and hasn't been ridden much since then. I used it for about 5 days of DH on good years, and used it for trail riding otherwise. The wheels are a little bit of an issue. I had some bad luck trying to buy a set of used Saint wheels. The hubs on the first set ended up being totally trashed and the bearing races inside the hubs were so pitted they were beyond usable. The second set has a pretty moderate hop in the rear wheel, and the axles/bearings are a little loose. The bearings aren't super smooth, but they may be able to be rebuilt. I had ridden the bike with a set of D321 wheels and Hadley hubs, which I swapped over to my V10. I would include them on this bike for an extra $250 or so. See specs below. Santa Cuz VP Free, size large, white, 8.5" rear-wheel travel Marzocchi 66RC fork set at 170mm (6.5") but adjustable to 150mm (6"). Relatively new lowers with low miles Chris King NoThreadet headset Thomson Elite seatpost Thomson Elite X4 50mm x 0 degree stem, 31.8mm clamp RaceFace Diablous DH lo-rise bar, 31.8mm clamp Manitou Swinger SPV 6-way rear shock with 500# spring Blackspire NS-1 chainguide WTB Volt saddle Shimano Saint FC M805 Saint Hollowtech-2 cranks, 175mm arms Shimano XT SM BB70 bottom bracket Shimano Saint BR M800 brakes with Saint BL 800 levers Shimano XTR rear shift pod SL 952 Shimano SLX CS HG-80-9 9 speed cassette Shimano XT long cage rear derailleur Shimano Saint FH M825 rear hub, 150mm, unknown rims (stickers removed--Mavic?) 32 hole Shimano Saint HB M820 front hub, unknown rims, 32 hole (rims have eyelets and black spokes) Shimano SM RT-78L 203mm Centerlock rotors Minion DHF 2.5 super tacky DH tires Included extra parts: The original Progressive Fifth Element rear shock with 450# spring Old derailleur hanger, may be slightly bent, but good as a backup Extra wheelset that might be good for spare parts (hub parts, spokes, swap the rims?): Shimano Saint HB M810 20mm front hub, with Mavic EX 325 Disc rim, 32 hole Shimano Saint FH M815 150mm rear hub, with Mavic EX 325 Disc rim, 32 hole Possible inclusion for extra $250--Hadley wheelset: Hadley SDH XL 150 R4.0 150mm rear hub laced to a Mavic 321 Disc 32 hole rim, with Intense 909 2.5" DH tire Hadley H500145 R5.0 20mm front hub laced to a Mavic 321 Disc 36 hole rim, with Continental Der Kaiser 2.5" tire I've also got a ton of extra rotors, rear derailleurs (XT, Saint, etc), used cassettes, grips, cable housing, tires, and other parts that could be included. More photos available, or search Boston Craigslist. Open to possible trades, I'm specifically looking for: Thomson 31.6 seatpost, 410mm ENVE M70thirty front wheel, 27.5, 100x15mm hub (non boost) Chris King Inset3 Marker Kingpin ski bindings