ncbrock
- Member since May 22, 2019
- 29
-
Asheville , North Carolina - 0 Followers
- 0 Trailforks Points
Recent
Selling
Jul 27, 2023 at 18:48
Jul 27, 2023
Marino/Sick! Bicycle Deathwish - Large
$1400 USDThis bike is large-ish. The geometry is long/low, and slack, but it rides good uphill and down. 29”. Will ship, expect about $150 for shipping.
This frame was clear coated from Marino, it started to fail in some spots. I have sanded the worst of it off the top tube and coated it with boiled linseed oil to protect it. You might find some surface rust forming under the clear coat.
- Funn bars 800mm
- DMR short stack stem
- Formula RX brakes (old school but they work), probably not up to everyone's modern standards
- 203mm floating rotors
- Cane Creek Helm MKI 160mm
- DVO Jade 160mm
- Sun Ringle 50mm Mulefüt wheelset, got some dingers but are still decently straight and hold air fine.
- Shimano XT shifter/derailleur 11 speed
- 46T cassette
- Oneup 180mm dropper
- SLX crank
- Maxxis Agressor rear/Assagai front.
Brooks saddle not included. Bring your own pedals and saddle.
Selling
Jul 27, 2023 at 18:39
Jul 27, 2023
Stooge MK4 Roller or Frame - 18"
$1400 USDStooge MK4 roller. Add your drivetrain/bars and ready to shred some gnarly trails. If you don’t know about Stooge bikes - you should. Probably the most fun on a rigid bike I’ve ever had. Paint is in really good condition, a few scruffs but I would say 8/10.
- Seat not included
-i9 trail 270 wheelset, 27.5”, Torch hub with HG driver
- Maxis Rekon 2.8 front, DHR 2.6 rear
- Sram G2 RSC brakes with 180mm rotors
- Cane Creek Aheadset
- Tecate Bars (my homemade bars after a few Tecates were consumed)
- manual dropper post that needs to be rebuilt
Basically add your drivetrain (or I highly recommend just single speed-ing it) and hit the jump lines. Also needs a different stem if you want to run these bars or throw on a modern 31.8 stem.
Will sell just the frame for $800
Will ship in the US (expect about $150 for shipping)
Geometry:
https://geometrygeeks.bike/bike/stooge-mk4-2020/
Selling
Jul 27, 2023 at 18:35
Jul 27, 2023
Crust Evasion Roller or Frame - 58cm
$1400 USDWhat you will receive for $1400
- Evasion 58cm frame
- 27.5” Stans wheelset with SP dynamo front
- Custom brazed SS stem made by yours truly
- Origin 8 Everland bars, Tektro levers
- TrP hyrd brakes
- 203mm floating rotors
- a matching rear tire as well as this maxxis
- tange headset
-Frame only: $800
The paint reflects a bike that has been used as a bikepacking bike, locked up around town, thrown in the back of trucks, etc: It’s not going to win any awards. You don’t have to worry about laying it down on a rock garden anymore, you’re welcome.
Throw a drivetrain on and have a super solid bike that’s ready to tour. I took this on the San Juan hut-to-hut trip and had zero mechanicals despite sending all the single track.
Sorry you will not receive the lights, rack, seat or post, cranks, or drivetrain.
Expect $150 for shipping.
Selling
Nov 11, 2020 at 7:35
Nov 11, 2020
LOOK KG171 carbon/aluminum lugged large
$500 USDOwn a piece of cycling history with this rad aluminum lugged, carbon tubed road bike. Sub 17lbs already with some cheap parts that could be upgraded. Top tube measures 21.5” center to center. Seat tube measures 22” center of bottom bracket to top of seat tube. Paint is not in great condition, there’s chips all over but nothing structurally damaging
-Salsa cowchipper bars (I think? Been a while since I taped the bars)
-Tektro brake levers, tektro brakes
-FSA carbon crank, could use a new bottom bracket
Shimano 9 speed rear 11-34 with some parts bin (albeit, new) derailleur
Unknown carbon wheels, sealed bearings, standard quick release spacing whatever that is
Conti tires
