norcalhomer
- Member since Jun 4, 2011
- Male / 56
- Santa Cruz , California
- 4 Followers
- 0 Trailforks Points
Recent
Selling
Mar 6, 2022 at 8:44
Mar 6, 2022Turner flux
$2600 USDUp for sale here is my sick-ass Turner trail whip! Super fun, light & snappy bike for flowy trails and XC riding where you still want to rip the descents. Dw Link 120mm rear pairs perfectly with the 140 pike up front. The legendary Turner company is no longer producing suspension bikes, but is still around for support. All pivot bearings are fresh and I have a full set of replacements; and they last a VERY long time.
The build is:
Nobl 33 carbon rims
Industry 9 torch hubs
SRAM 11 spd drive
Shimano XT cranks 170mm
Shimano XT brakes
KS Lev dropper post 150mm
Diety Cavity stem 35mm
Cromag Fubars OSX
Cromag Trailmaster II leather seat
Gamut upper chain guide
Maxxis Minion dhf exo 2.3 front
Maxxis Minion dhr DD 2.3 rear
No pedals
I also have the Turner RFX as my enduro rig, this was a nice addition to my quiver for less aggressive riding. Now with the addition of an ebike I am no longer riding either bike, so I’m going to hang on to the RFX and this one needs to go.
Thanks for looking!
Selling
Oct 24, 2021 at 14:00
Oct 24, 2021Xfusion Manic dropper 150mm
$100 USDTook this off my new bike, I needed a longer post. Complete with lever, and a new cable and housing.
Selling
Jun 29, 2019 at 13:00
Jun 29, 2019Diety Cavity stem 50mm
$50 USDBarely used black 50mm length, 31.8 bar clamp & 1 1/8” steerer. Super nice light & strong stem with ultra low stack ht, can be flipped for +- rise. Buyer pays shipping, thanks for looking
Selling
Nov 12, 2018 at 11:49
Nov 12, 2018Race face turbine 175mm
$125 USDVery good condition crankset with cinch 34T non-boost chairing with approx. 20% wear. Also includes PF30 bottom bracket, which spins like new. I took this off a bike I just bought that has seen very little use. Buyer pays shipping, thanks for looking
Selling
Oct 7, 2017 at 11:38
Oct 7, 2017Works components EC44/ZS56 1 degree headset
$70 USDI ordered this from Works Components, thinking I would need it for a new frame I got, but ended up liking the frame's stock HA as is and never installed it. Shipping and PayPal fees included, my loss will be your gain and you won't need to wait for 2 or 3 weeks to get it from the UK! These are beautifully machined and are far superior to an angleset, as there is no spherical interface to fail. These are made specific to head tube length and use a standard bevel interface. This one is:
"SET 3- for head tube length of 110- 119mm." Make sure to check to see if this is the right one for your frame. For tapered steerer. I put one in my enduro rig to replace the cane creek/ FSA one that was failing, totally solved the creaking issue.Thanks for looking.