nzfletch

For Sale: 2015 Specialized Enduro Comp 29 XL. All runs very well. Cleaned and maintained regularly - usual scuffs, a dink on the down tube and a couple of flat spots in the rear wheel have all been there since before I bought the bike in 2017, and the wheels still hold pressure perfectly. To fit - minimum saddle height is 76cm with the dropper at full height- meaning your inseam will need to be 85cm/33 inches or more. Collection ideal from Guildford area. Can deliver locally or central London by agreement. FRAME: M5 aluminium, 29" geometry, tapered headtube, PF30 BB, ISCG '05 mount, internal seat post routing, 142+ dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 155mm travel REAR SHOCK: *Upgrade*- Float X 216x57mm FORK: RockShox Pike RC 29, Solo Air spring, tapered alloy steerer, w/ lockout, compression, rebound adj., 15mm thru-axle, 160mm travel STEM: *Upgrade* RaceFace Turbine 60mm- 35mm bar clamp GRIPS: *Upgrade* Uberbike Skinny Logo Lock On Grips BRAKES: Shimano Deore BR-M615- *Upgrade* 180mm Ice-Tech Rotor Front REAR DERAILLEUR: *Upgrade* Shimano RD-M7000 SLX 11 speed Shadow+ SHIFT LEVER- *Upgrade* Shimano SL-M7000 SLX 11 speed CASSETTE: *Upgrade* Shimano CS-M7000 SLX 11 speed 11-46t CHAIN Shimano HG601 SLX 11 speed CRANKSET: SRAM X1 1000, X SYNC ring, PF30, 30T, 94mm BCD spider BOTTOM BRACKET: SRAM, PF30, OS press-in bearings, sealed cartridge - replaced 2020 WHEELS: Roval Fattie 29 rim, alloy disc, 29mm inner width, 32h, Specialized Hi Lo disc hub, sealed cartridge bearings. Rear hub bearings a bit rough but running ok. FRONT TIRE: Maxxis Minion DHF 29x2.3" REAR TIRE: Specialized Hillbilly Grid 29x2.3" (both setup Tubeless with new Muc Off valves) SADDLE: Nukeproof Neutron CrMo rails SEATPOST: *Upgrade*- Brand X Ascend XL 170mm

Mavic Deemax Elite wheel set with optional Boost adapters. I've bought a new bike so don't need these anymore. Pinkbike review of them here: https://m.pinkbike.com/news/review-mavic-deemax-elite-wheels.html Valves included. Taped and ready to ride. Internal rim with 30mm. Some nicks and scratches that are expected on wheels but beads are sound and tyres will seat easily and stay there. Would prefer collection from Guildford or could meet on London, but could post if needed. Don't have a wheel box so would need to source something.

Mavic Crossride 26". QR axle. Bladed spokes. Rear wheel rebuilt last year by Surrey Hills Cycleworks in Leatherhead. Hardly ridden since as had an arm injury. Great wheels.

Two Continental Baron tires. Great tires but I have a 29" bike now so don't need them. I had them on front and back. The one from the front looks almost new and the one from the back still has loads of tread left. They've not done huge miles and it's been Surrey Hills loam for most of it so very little wear.

Rockshock Revelation Dual Air forks. For 26" wheels with 150mm travel. QR axle. Lowers have a few scratches but the stantions are still in great condition. Haven't been serviced this year so could probably do with one. Still feel nice to ride on though. New bike means I don't need them anymore. They are compatible with the Motion Control poplock lever but this broke a while ago so isn't included. Can be replaced for about £25. Steerer is cut to 212mm from bottom of crown race.

Almost brand new. Length 380mm. Width 30.9mm. Drop 125mm. Was a warranty replacement last year and I rode the bike two or three times before getting a new one with dropper included. Cable is uncut. No damage to post anywhere. Can include bleed kit if wanted. Great condition. Grab a bargain.