Jan 2, 2016 at 8:27Jan 2, 2016
for sale: 2008 Kona Hoss in good condition, just a few stone chips and cable rubs, i've been using it as my work bike which is why it has the semi slick/gravel track tyres which are nearly new but you could fit some off road tyres and use it at any trail centre. the bike is in working condition apart from the rear hayes brake doesn't work, the front deore has been more than good enough for road work, and the other problem is the bottom bracket could do with being changed, its an other square taper part that are about 10 quid from chain reaction ect. other than the tyres and front brake the bike is as standard and works well.
prisspringle prisspringle's photo
Dec 28, 2015 at 5:22Dec 28, 2015
Added 7 photos to for-sale
Jul 25, 2015 at 7:49Jul 25, 2015
Jul 25, 2015 at 7:48Jul 25, 2015
for sale xt front mech used for about 1 year in full working order other than been dirty, for full spec see the link below, 34.9mm seat tube clamp. http://www.chainreactioncycles.com/shimano-xt-m771-conventional-9sp-front-mech/rp-prod20685 open to offers.
Jul 25, 2015 at 7:40Jul 25, 2015
for sale 3 speed front shifter, unknown model, but works well a little dirty, was taken off as i've moved to single front ring open to offers
Jul 25, 2015 at 7:36Jul 25, 2015
for sale shimano 8 speed shifter, not sure which model, most likely deore or lower spec, taken off as i changed to 9speed worked fine, scuff on the top of the clamp and a little dusty but it works open to offers
Jul 25, 2015 at 7:32Jul 25, 2015
2005 kona scrap , in fair condtion apart from some stone chipping on the chainstay and the disc has scraped some of the paint on the inside of the disc side chainstay. good solid frame that sadly never gets used. open to offers
Added 4 photos to for-sale
Jul 25, 2015 at 7:08Jul 25, 2015
Jul 25, 2015 at 7:07Jul 25, 2015
For sale 2005 Kona stinky, used with the normal cable rubs, stone chips ect but in full working condition. Comes with seat post but no seat clamp, 34.9mm. The bearings were changed about 6 months ago the rear shock holds pressure and works as it should. I've just changed frame so it's no longer needed. Will consider offers.
Video by scottsecco