Register New User
Video: Going Through Loris Vergier's Mechanic's Toolbox
Apr 26, 2019 at 11:24
Loris Vergier's mechanic Pierre Alexandre takes us through his precious toolbox at the first round of the UCI World Cup in Maribor.
What's your prize tool in your toolbox?
Must Read This Week
Martin Maes Tests Positive for Masking Agent at EWS Rotorua & Tasmania, Receives 90 Day ‘Non-Intentional’ Suspension
Reminder: Enter the Return To Earth 30-Day Trailforks Ride Challenge
Richie Rude Announces Return to the EWS
Pinkbike Poll: Who's Breaking Bikes These Days?
The MTB Aesthetic - Sunday Comics with Taj Mihelich
8 Bike Checks from Allos - French Enduro Series
Yoann Barelli Out for 6 Months With ACL Injury
First Ride: ARC8 Extra - A New 160mm 29er From a Small Swiss Brand
(Apr 26, 2019 at 12:11)
Well at least that PA grease monkey ain't a prima dona when it comes to the brands of his tools. He has a bit of everything and I guess what he likes better. Great lesson for those idiots going all in with one brand and one brand only simply because they like the blue colour better ... you know they also have some crappy designed tools ...
(Apr 26, 2019 at 12:28)
Strewth. Some of that blue is just crazy money.
(Apr 26, 2019 at 12:35)
That blue is pretty low quality. Red, however...
(Apr 26, 2019 at 12:38)
: well if it was just expensive but still good ... lmao
But let's be real, you have to wrench for a living if you want to really banter about bike tools.
(Apr 26, 2019 at 20:45)
: if you don't like Park, Unior makes some pretty good kit. The DT Swiss stuff is beautiful. I own 4 spoke meters, and while at least one of them is nicer than the DT, and one other equally as good, I would still love to own one!
(Apr 26, 2019 at 20:48)
: Me, i use a lot of Unior stuff. Super impressed with their value, and so far I haven't had any reliability issues. The same cannot be said for Park.
(Apr 26, 2019 at 21:01)
: I agree fully. Unior is good stuff.
Just put down my Unior tension meter. Much better made than the blue meter. I typically use them as my workhorse meter before final tensioning and final checks for wheel building - at which point I convert to Wheel Fanatyk, and Cognoscenti digital meters. I do find the park springs break/snap too frequently and accuracy drifts. The Unior is much better made, much more robust, and actually comes with a calibration rod so you can ensure your meter is always spot on - where Park wants you to send their back for calibration which is totally a pain in the ass.
I'm slowly converting to Unior when I need new tools and replacements.
(Apr 27, 2019 at 1:24)
Not sold on the other blue brand from Eastern Europe at all. Yes they are a bit cheaper here and there but not by much, and in terms of forge I don't like their alloy at all. Pure crap that doesn't last long and it almost looks like it's made out of (not so well) recycled metal ... but I digress.
At least the other blue brand always deliver in terms of packaging. Some of their tools come with a nice box and a fancy laser cut foam. But some of their design are pure junk, like their BB30/PF30 extractor.
And regarding spoke tension meter, yes the original blue one is crap, but it's cheap crap ^^. The other blue one, the one you're talking about guys, is crap as well but at least it comes with a calibration tool. But there is a Chinese made copy of the DT Swiss design, it costs like 50 bucks and it comes with a digital gauge. Bought it for a trainee, ended up rebuilding upon reception to make it more accurate. It has been used everyday ever since for the last 2 years. I even bought a second one and I do not bother using the DT one any more, I like the digital gauge on the Chinese copy better than the analog one from DT. And yes the Chinese one is accurate, since we have a proper spoke calibration tool (homemade, steel frame with a portable scale with digital gauge) and that I have to lace loads of carbon hoops it better be
(Apr 27, 2019 at 2:17)
: wouw one of those DT swiss spoke tension meter is 1K alone!
(Apr 27, 2019 at 8:27)
: it throws me off, you calling it 'the other blue'. Its orange in North America.
(Apr 27, 2019 at 9:02)
: well...Unior was blue until this year or last. Now they are Orange/Red.
(Apr 27, 2019 at 9:22)
: check out Cognoscenti's Filip Kralyevski manufactured meter. Cost a bit more than the DT, and is even more precise/accurate/consistent.
(Apr 26, 2019 at 12:54)
"I always finish by hand". Wait, what are you talking about exactly here?
(Apr 26, 2019 at 12:18)
That hand ratchet is nice.
(Apr 27, 2019 at 10:50)
Park aren't great but most of their stuff does the job fine.
I treated myself to a few Facom T handle Allens in the key sizes and they are as good as I've used.
For smaller tools as a reasonable price Topeak/Lezyne are better than Park in my experience.
Also Wolf Tooth do some (not many) pretty nicely made tools.
(Apr 27, 2019 at 9:29)
I love following toolboxwars on Instagram, has quite a few tool boxes to look at. That page also got me to follow knipex. Now I'm spending more time working on my tools and bikes than riding!
(Apr 26, 2019 at 11:43)
Is that one of those visors with the fake hair on top?
(Apr 28, 2019 at 20:29)
I think its radder than that. his own mop.
(Apr 26, 2019 at 11:43)
Flashback to the 80s with that intro.
(Apr 27, 2019 at 5:02)
Yes! I scrolled down hoping to see what theme song that is.
(Apr 27, 2019 at 0:47)
Metal tire lever ? How do you not damage the rim ?
(Apr 27, 2019 at 1:40)
(Apr 27, 2019 at 5:39)
Impossible to fit tyre on without if they are using inserts like cushcore
(Apr 26, 2019 at 13:59)
6:40 I also had the same tools lol
(Apr 26, 2019 at 11:36)
My 20 year old Pedros bottle opener.
(Apr 26, 2019 at 13:44)
My 20 year old park BO-1
(Apr 27, 2019 at 19:22)
Jesus Christ is this guy inventing a new language? He's got great tools, and probably knows what's up, but it's like listening to Charlie Brown's teacher.
(Apr 26, 2019 at 14:18)
can someone explain to me what "trick" he's talking about at 5:30? About the nipples
(Apr 26, 2019 at 14:31)
yes what ?
(Apr 26, 2019 at 15:24)
When lacing a wheel, use an old spoke to hold the nipples (from the tyre side of the rim) and prevent dropping them between the walls of the rim. Assuming thats the trick. Keen to know if its something else though
(Apr 26, 2019 at 17:45)
Getting nipples through rims can be a hassle if you’re in a hurry. With the spoke tool you just thread on, push through and then thread it off, straight on to the spoke in the wheel.
There are other tools/tricks for it, but you’ve always got a spoke at hand, they’re tiny, and pack light.
(Apr 26, 2019 at 20:10)
(Apr 26, 2019 at 20:38)
: even better:
Far better than using the threaded end of another spoke.
(Apr 26, 2019 at 21:40)
Tried a few different nipple insertion/driver tools. Still yet to find one better than an old spoke.
(Apr 27, 2019 at 9:21)
: I definitely prefer the pin vice for quick working
Post a Comment
You must login to Pinkbike.
Don't have an account?
Submit a Story to Pinkbike
Pinkbike RSS Feed
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
Mobile Version of Website