scottczar

This bike is in excellent condition. It has very few miles on it. I work at a bike shop and have had it for a year but do not ride this bike much. It is a OE build besides the seat post (160 mm vs 130 mm) and the handlebars I cut to 760 mm vs 780 mm. I am 5'6 and the bike fit me very well. BOTTOM BRACKET SRAM GXP CRANKSET SRAM XX1 Eagle, Boost™ 148, 170mm crankarm, 24mm spindle, 30t chainring SHIFT LEVER, CASSETTE, CHAIN, REAR DERAILLEUR: SRAM XX1 Eagle, 12-speed FORK FOX 36 29" 150mm FACTORY, FIT4 REAR SHOCK FOX FLOAT DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode adjustment, 210x50mm FRONT HUB Roval Traverse, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h REAR HUB Roval Traverse, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h SPOKES DT Swiss Revolution RIMS Roval Traverse SL 29, hookless carbon, 30mm inner width, 24h/28h, tubeless ready, hand-built FRONT TIRE Butcher, GRID casing, GRIPTON® compound, 2Bliss Ready, 29x2.6" REAR TIRE Purgatory, GRID casing, GRIPTON® compound, 2Bliss ready, 29 x2.6" SADDLE Body Geometry Phenom Expert, Adaptive Edge design, hollow titanium rails, carbon fiber base, 143mm SEATPOST Command Post IRcc, 16-position micro-height adjustable, two-bolt head, bottom mount cable routing, remote SRL lever, 34.9mm, 160mm of travel STEM Syntace MegaForce 2, 6-degree, 31.8mm clamp HANDLEBARS Specialized Trail, FACT carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 760mm, 31.8mm GRIPS ODI TLD pink FRONT BRAKE SRAM Guide RSC, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm rotor REAR BRAKE SRAM Guide RSC, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180mm rotor SEAT BINDER Specialized bolt-type, alloy, 38.6mm FRAME FACT 11m, full carbon chassis and rear end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 140mm of travel

This bike was an Specialized Epic comp that I changed all the parts on it. Also just had the brain shock serviced. Hand built Ibis carbon 935 rims w/Sapim c-xray spokes, Chris King hubs & BB, Praxis carbon cranks, X01 gears, Enve handlebar, Fox step cast 32 w/remote, carbon LEV w/wolf tooth pink lever, ... Stem has been swapped back to SBC stem It weighs around 23 lbs with XC tires.

I built up this frame with parts off of my 2018 Epic Comp. The parts have 300 miles on them and the frame has 100 miles on it. It is in excellent condition.